GTW EZGO TXT Fender Flares Installation Guide

GTW EZGO TXT Fender Flares Installation Guide

ITEMS INCLUDED

• Fender Flares (4)
• Push Rivets (20)

TOOLS NEEDED

• 9/32” Drill Bit
• Drill
• Marker

We recommend professional installation. If you choose not to have this product installed by a professional, we highly recommend that you exercise caution, care, and patience when installing this product, as it involves drilling holes into your car’s body.

STEP 1
Test fit fender flare to bodywork to determine best placement. Holding the fender flare in place, mark locations to be drilled

STEP 2
Drill first hole using a 9/32” drill bit. Ensure area behind body work is clear to avoid potential damage to wiring or other bodywork.

STEP 3
Insert barbed push rivet half-way to secure fender flare. Check other marked holes to ensure proper placement before drilling. Once sure of placement, rotate fender flare out of the way and drill other holes.

STEP 4
Push the first rivet in to secure fender flare and then insert other rivets.

Repeat Steps 1-4 for other three fender flares

INSTALLATION COMPLETE

EZGO TXT RXV and 54 arrogated trademarks of Tastronotonth ClubCar Pucedo, DS, Onward and Tamponaroglued trademarks of IngersoRant, Inc. Yamaha Y Drive Drivez 644 GG 626-29 around trademark of Yamaha Golf Car Company Any reference to Cub Car EZ-GO or Yamaha tha ad badan, word marks, and products are only for purposes of deny golf carts with which this Madaxproductia compatible Madexproducts are aftermarket parts and not oral aquipment parts. Mad is not connectedto, affliated with sponsored by or endorsed by alther Textron Innovations Inc., Ingersoll Rand Inc., Vanahe SafCart Company or any of their parentar subsidiary companies

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>