AstroAI ACTGHMBK 230 PSI Tire Inflator Gauge User Manual
- June 5, 2024
- AstroAI
Table of Contents
AstroAI ACTGHMBK 230 PSI Tire Inflator Gauge
SAFETY INFORMATION
- Please read and follow the instructions before use.
- Do not use the product for a non-specified purpose.
- Please do not use the product if product is defective.
- Keep the product out of children’s reach. Do not expose the product to rain or water.
- Keep the product away from fire, corrosive liquids and magnetic substance.
- The product only works on Schrader valves.
- Do not exceed the maximum pressure rating of the product.
- Any modification of the product is forbidden.
- Pay attention to the recommended pressure settings for tires. Do not exceed the recommended tire pressure, doing so may cause harm to tire, vehicle, or body injury.
- When not in use please store the product in dry place. Please use wet cloth and mild cleanser to clean the appearance.
DIAGRAM
- Air Valve Trigger
- Rubber Protective Sleeve
- Dial
- Hose
- interchangeable Lock-On Brass Chuck
- NPT Brass Thread
- 1/4 NPT Quick-Connect Fitting
INCLUDED ACCESSORIES
- Valve Core Tool
- Long Cone Adapter
- Short Cone Adapter
- Needle Valve Adapter
- Presta Valve Adapter
- Valve Caps(4pcs)
- Motorcyle Right
- Angle Adapter
- Brass Twist-On
- Air Chuck
- Thread Seal Tape Roll
SIZE DESCRIPTION
SPECIFICATIONS
| Hose Length | 47cm/ 18.50in | Reading | Reading From Dial |
|---|---|---|---|
| Body Length | 30cm/ |
11.81in
| Units| PSI, BAR
Dial Diameter| 8cm/
3.15in
| Accuracy| ±2%
Measurement Maximum Range| 0-230PSI, 0-16BAR
INSTRUCTIONS
- Before starting, check the recommended inflation pressure for your vehicle’s tires. Manufacture recommended pressures can be found on the inside of the driver’s door jam and owner’s manual. The tire’s maximum pressure can be located on the sidewall of the tire. Take care not to exceed any maximum tire ratings, doing so may cause damage to the tire, vehicle, and possibly bodily harm.
- Remove the valve cap from the valve stem of the tire, then connect the interchangeable lock-on brass chuck on the valve stem. Note: the brass chuck should be connected to the valve stem firmly without handhold.
- The other end of the tire pressure gauge should be connected to an air hose coupling, allowing air to pass from the air compressor to the inflator.
- When you press the air valve trigger hard to inflate the objects, dial will display the pressure value timely. When the desired pressure value is reached, you may release the air valve trigger.
ATTENTION
- This tire inflator gauge can be used to check the tire pressure without being connected to an air compressor.
- Do not press the air valve trigger when not connected to an air compressor. Doing so will release air from the tire.
- If air is leaking between the interchangeable lock-on brass chuck and tire’s valve stem, please check whether the interchangeable lock-on brass chuck is connected firmly on the tire’s valve stem.
TROUBLESHOOTING
- INACCURATE READINGS
- Adjust the angle between the air chuck and the tire’s valve stem to ensure strong sealing.
- Error value of 2PSI in the reading is normal.
- AIR LEAKAGE
- Check all the connecting parts: air compressor, the tire inflator gauge, the quick connector fitting, air chuck, and tire valve stem. All the connecting parts should be connected firmly without any leakage.
- If there is any leakage, you may use tape to fix it for better sealing performance.
3-YEAR WARRANTY LIMITED
Each AstroAI 230 PSI Tire Inflator Gauge will be free from defects in material and workmanship. This warranty does not cover damage from neglect, misuse, contamination, alteration, accident, or abnormal conditions when operating or handling. This warranty covers the original purchaser only and is not transferable. Questions or Concerns? We’re happy to help! Contact us via [email protected]. AstroAI is always committed to provide excellent products and customer services for you. For more information about us, search www.astroai.com.
References
Read User Manual Online (PDF format)
Loading......