AstroAI 20230424 47.2 Ice Scrapers for Car Windshield User Manual
- May 15, 2024
- AstroAI
Table of Contents
MULTIFUNCTIONAL
TELESCOPIC SNOW BRUSH
USER MANUAL
INTRODUCTION
Thank you for purchasing the AstroAl Multifunctional Telescopic Snow Brush
(Snow brush for short)
This product is designed to remove snow from a variety of surfaces We hope you
enjoy your new snow brush!
Thank you again for choosing AstroAl, if you have any questions or concerns
regarding your new product, please contact us via
support@astroai.com
Please fully read and understand this manual before using this product and
keep this manual for future reference.
WARNING
- Store the product in a dry place out of direct sunlight.
- Keep the product away from fire, corrosive liquids and strong acids.
- Avoid putting heavy objects on the product, doing so may bend or deform it.
- Do not use the product for unintended purposes.
- Issues may occur during shipping. If you experience any of the issues below, please contact our support team:
a. The connector is damaged; the snow brush and scraper cannot be assembled.
b. The components cannot be connected or are extremely loose.
c. Many bristles fall off.
d. The grip is broken.
PACKAGE INCLUDES
Snow Brush x1
Storage Bag 1
DIAGRAM
1. Squeegee
2. Bristle
3. Angle Adjustment Button
4. Button
5. Length Adjustment Shaft| 6. Length Adjustment Button
7. Grip
8. Button
9. Ice Scraper
10. Hook Hole
---|---
DIMENSIONS
INSTRUCTIONS (ASSEMBLY)
- Align the grip with the snow brush and push the two pieces together to secure them.
- Align the other end of the grip with the ice scraper and push the two pieces together to secure them.
- Press and hold the Length Adjustment Button, slide the shaft to the appropriate length with your other hand and release the Length Adjustment Button to lock the position.
- Press and hold the Angle Adjustment Button, rotate the snow brush to the desired angle and release the Angle Adjustment Button to lock the position.
INSTRUCTIONS (DISASSEMBLY)
- Press and hold the button on the snow brush and pull the grip out.
- Press and hold the button on the ice scraper and pull the grip out.
TROUBLESHOOTING
Ice on the Bristles
Ensure the use environment is dry, cold and liquid-free.
Deformed Bristles
Make sure there is nothing heavy pressed on the product.
The extendable shaft is stuck and will not extend
Check if the installation was completed as instructed. Install the components
correctly.
Loose Buttons
Make sure the buttons are fixed tightly before use.
RECYCLING
You may dispose of the product when its service life has ended, please recycle the recyclable parts according to local guidelines.
WARRANTY PERIOD
2-Year Limited Warranty from AstroAl.
Each AstroAl snow brush will be free from defects in material and workmanship.
This warranty does not cover damage from neglect, misuse, contami- nation,
alteration, accident, or abnormal conditions of operation or handling
This warranty covers the original purchaser only and is not trans- ferable.
Questions or concerns? We’re happy to help! Get in touch via
support@astroai.com
Web: www.astroai.com
E-mail: support@astroai.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>