AstroAI DM1 Sup Electric Air Pump User Manual

DM1 Sup Electric Air Pump
User Manual

FOREWORD
Thank you for purchasing the AstroAI SUP Electric Air Pump.
This smart DC electric air pump is equipped with an LED screen and a preset function, enabling easy inflation of SUPs, kayaks, inflatables, swim pools, inflatable loungers,  and more. It also includes a deflation function for easy deflation and storage of inflatables.
To ensure optimal performance and user safety, please read and follow all of the instructions below before operating the device.
Please keep this manual for future reference.
We hope you enjoy your new SUP electric air pump!
Thank you again for choosing AstroAI, if you have any questions or concerns regarding your product, please contact us at support@astroai.com
Please fully read and understand this manual before using this product. Keep this manual for future reference.

WARNING

• Keep the pump out of the reach of children.
• Do not store or use on wet surfaces. Do not handle the DC plug with wet hands.
• Do not aim the inflation port at any part of a human body. Always supervise the air compressor while it is pumping.
• Do not disconnect the hose during inflation, high-pressure air may cause injury.
• Ensure that your car engine is running before you use the pump.
• Ensure the power supply is 12V DC. Check the cigarette lighter to ensure there is no residue or rust inside. A cigarette lighter with poor conductivity may cause  overheating, damaging the pump.
• Do not block the inflation or deflation ports. Keep the inflation and deflation ports open.
• Check the maximum pressure of your inflatable items before inflating.
• Excessive pressure may damage the inflatables.
• Do not let the pump continuously work for more than 20 minutes.
• The motor overheating may cause damage. Please let the pump cool for at least 30 minutes after every 20 minutes of use.
• Please only use with the included AstroAI accessories. Using this product with incompatible accessories may create safety hazards.
• After using the pump, if you want to move, maintain, or adjust the product, unplug the DC plug first.
• If the power cord is damaged, this product should only be serviced by the manufacturer, authorized service personnel, or other qualified personnel.
• Unplug the DC plug before any movement, maintenance, or adjustments.
• If the hose is damaged, do not use the product. Replace the hose immediately.
• Do not use the pump if any parts are damaged. Please contact qualified personnel for maintenance.
• Do not expose the pump to rain or immerse it in water. Store the pump in a dry and well-ventilated place.

DIAGRAM

INSTRUCTIONS-INFLATION

• Remove the dust plug, connect one end of the hose to the inflation port and turn it clockwise to the end.
• Align the appropriate nozzle to the other end of the hose (see Pic 1).
• Then, tighten the nozzle clockwise and insert it into the inflatable item’s port (see Step1 in Pic 2), tighten the hose clockwise (see Step 2 in Pic 2).

• Plug into a 12V DC cigarette lighter.
• Press the Unit button to choose from PSI and BAR.
• Press the Mode button to choose from low-pressure mode and high-pressure mode.

Low-pressure mode: Suitable for low-pressure items like air mattresses, balloons, and similar products. The pump will not display the real-time pressure; users may  physically check the inflatable items to judge their level of inflation.
High-pressure mode: Suitable for high-volume items like stand up paddle boards; users may preset the pressure value before inflation, the pump will automatically shut of when it reaches the pre-set pressure.
Press the ‘+’ button and ‘-’ buttons to set the desired pressure value.
Pressure range is 3-20 PSI.
Press the power button to start inflation.
During the inflation, the pump will automatically shut off when it reaches the pre-set pressure. You may press the power button to manually stop inflation.
Unplug the DC plug from the 12V DC cigarette lighter after inflation is completed.
Disconnect the hose from the pump and inflatable items, securely store them.
Note: The default preset value is 15 PSI. Your previously preset value will be recalled for the next inflation.
Note: After 2 minutes of no operation, the pump will enter standby mode. Click the power button twice to activate the pump.

INSTRUCTIONS-DEFLATION

• Press the mode button to choose deflation mode.

• Connect one end of the hose to the pump’s deflation port and tighten it clockwise; then connect the other end of the hose to the inflatable item’s inflation port.
  

• Press the power button to start deflation. Press the power button again to turn of the pump after deflation is complete.

TROUBLESHOOTING

The fuse in the DC plug is blown.
The motor stopped due to overheating or overload.
Solution| Ensure the power cord is securely inserted into the 12V DC power source.
Replace the fuse.
Cool down the motor and restart the pump.
If the problem persists, please contact support@astroai.com
Trouble| Abnormal noise during inflation
Cause| Continuous use  leads to overheating internals.
Solution| Rest the pump for 30 minutes.
Trouble| Slow or abnormal inflation/deflation
Cause| Check if the hose is blocked or broken.
Poor connection between the hose, pump, and inflatable item.
Solution| Clear the blockage or replace the hose.  Ensure it is still intact.
Reinstall the hose.
If the problem persists, please contact support@astroai.com

SPECIFICATIONS

The fuse in the DC plug is blown.
The motor stopped due to overheating or overload.
Solution| Ensure the power cord is securely inserted into the 12V DC power source.
Replace the fuse.
Cool down the motor and restart the pump.
If the problem persists, please contact
support@astroai.com
Trouble| Abnormal noise during inflation
Cause| Continuous use  leads to overheating internals.
Solution| Rest the pump for 30 minutes.
Trouble| Slow or abnormal inflation/deflation
Cause| Check if the hose is blocked or broken.
Poor connection between the hose, pump, and inflatable item.
Solution| Clear the blockage or replace the hose.  Ensure it is still intact.
Reinstall the hose.
If the problem persists, please contact
support@astroai.com

PACKAGE INCLUDES

RECYCLING

You may dispose of this product when its service life has ended; please recycle the recyclable parts according to local guidelines.
WARRANTY PERIOD
2- YEAR LIMITED WARRANTY FROM ASTROAI
Each AstroAI SUP electric air pump will be free from defects in material and workmanship.
This warranty does not cover damage from neglect, misuse, contamination, alteration, accident, or abnormal conditions of operation or handling.
This warranty covers the original purchaser only and is not transferable.
AstroAI always wants to provide our customers with excellent products and customer service.
Questions or Concerns? We’re happy to help!
Please contact us via support@astroAI.com

Web: www.astroai.com
E-mail: support@astroai.com

References

• AstroAI | For All of Life's Adventures - AstroAI US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>