CHAUVET DJ Festoon 2 RGB QRG User Guide

CHAUVET DJ Festoon 2 RGB QRG **

**

About This Guide
The Festoon 2 RGB Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX values. Download the User Manual from www.chauvetdj.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty- registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance.

1. ONLY connect this product to a grounded and protected circuit.
2. SCONNECT from power before cleaning or replacing the fuse.
3. DO NOT look at the light source when the product is on.
4. Make sure the power cord is not crimped or damaged.
5. Never disconnect this product from power by pulling on the cord.
6. When mounting this product overhead, ALWAYS use a safety cable.
7. DO NOT allow flammable materials close to the product when it is operating.
8. DO NOT touch the product’s housing when it is on because it will be hot.
9.  The bulbs can get hot with excessive use. Avoid touching them with bare hands, and always allow the bulb to cool before handling.
10. The voltage of the outlet to which you are connecting this product must be within the range stated on the decal or rear panel of the product.
11. This product is for indoor or temporary outdoor use (IP54). Do not expose to harsh or excessively corrosive environmental conditions (whether indoors or outdoors), including, but not limited to, extreme temperatures, humidity, atmospheric conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock and conditions which exceed the product’s Ingress Protection (IP) rating.
12. Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
13. Be sure that no ventilation slots on the unit’s housing are blocked.
14. NEver connect this product to a dimmer or rheostat.
15. Replace the fuse with the same type and rating.
16. Never carry the product by the power cord. Use only the batten to carry this product.
17. The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
18. In the event of a serious operating problem, stop using immediately.
19. DO NOT open this product. It contains no user-serviceable parts.
20. To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Contact

Outside the US, United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Visit www.chauvetdj.com for contact information.
What is Included

• Festoon 2 RGB Controller
• Power Cord
• 20 RGB Bulbs
• Extension Cable
• Quick Reference Guide

QUICK REFERENCE GUIDE

To Begin
Unpack your Festoon 2 RGB and make sure you have received all parts in good condition. If the box or contents appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

Fuse Replacement

1.  Disconnect the product from power.
2.  Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.  Pry the safety cap out of the housing.
4.  Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.

Festoon String Linking The Festoon 2 RGB includes 20 RGB bulbs. These bulbs can be connected for a custom length. Every 20 bulbs are considered one LED string for Pixel and Pixel+ DMX personalities.

Mounting

Before mounting this product, read the Safety Notes.

Mounting Diagram Festoon Controller

You may use the extension string if you need more distance for mounting.

Control Panel Description

value when in a function
< DOWN>| Navigates downwards through the menu list and decreases the numeric value when in a function
< ENTER>| Enables the currently displayed menu or sets the currently selected value into the selected function

Menu Map
Refer to the Festoon 2 RGB product page on www.chauvetdj.com for the latest menu map.

Control Mode

|

Control

| DMX|

Set the control mode

Music
Auto
Manual
Preset
DMX

Address

| Address| 001–512| Sets the DMX starting address

DMX

Channel

|

Channel

| 03-CH|

Select the DMX personality

09-CH
Pixel
Pixel+

Dimmer Mode

|

Dim Curve

| OFF| No dimming effect
Curve1|

Sets the dimming speed, fast to slow

Curve2
Curve3
Static Color| Custom| C-01–19| Static colors
Auto Programs| Program| P-01–38| Sp:000–100| Select auto program and speed
Sound Active| Music| 000–100| Select the sound active sensitivity

Manual Color Mixing

|

Manual

|

Color

| Red| 000–255|

Custom color mixing: Combine red, green, and blue

Green| 000–255
Blue| 000–255
IR Setting| Remote| ON| Turns IRC-6 control on or off
OFF

LED EXT

|

Led Strg

| 1 strg| Singular Festoon EXT string
2 strg| 2 Festoon EXT strings
3 strg| 3 Festoon EXT strings

Back Light Setting

|

Backlight

| ON| LED display does not turn off
30S| LED display turns off after 30 seconds
60S| LED display turns off after 60 seconds
Factory Default Reset| Default| NO| Resets to factory default settings
YES
Information| Version| V | Shows installed software version

DMX Linking
The Festoon 2 RGB can work with a DMX controller. Instructions for connecting and configuring this product for DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 512.
Master/Slave Connection
The Festoon 2 RGB uses the DMX data connection for its Master/Slave mode. Information about configuring the Festoon 2 RGB for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The Festoon 2 RGB can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download instructions for the IRC-6 or the Festoon 2 RGB User Manual from www.chauvetdj.com.

DMX Values 9Ch

7

| ****

Auto & Sound Programs

| 000 ó 010| No function
011 ó 016| Auto Program 1
017 ó 022| Auto Program 2
023 ó 028| Auto Program 3
029 ó 034| Auto Program 4
035 ó 040| Auto Program 5
041 ó 046| Auto Program 6
047 ó 052| Auto Program 7
053 ó 058| Auto Program 8
059 ó 064| Auto Program 9
065 ó 070| Auto Program 10
071 ó 076| Auto Program 11
077 ó 082| Auto Program 12
083 ó 088| Auto Program 13
089 ó 094| Auto Program 14
095 ó 100| Auto Program 15
101 ó 106| Auto Program 16
107 ó 112| Auto Program 17
113 ó 118| Auto Program 18
119 ó 124| Auto Program 19
125 ó 130| Auto Program 20
131 ó 136| Auto Program 21
137 ó 142| Auto Program 22
143 ó 148| Auto Program 23
149 ó 154| Auto Program 24
155 ó 160| Auto Program 25
161 ó 166| Auto Program 26
167 ó 172| Auto Program 27
173 ó 178| Auto Program 28
179 ó 184| Auto Program 29
185 ó 190| Auto Program 30
191 ó 196| Auto Program 31
197 ó 202| Auto Program 32
203 ó 208| Auto Program 33
209 ó 214| Auto Program 34
215 ó 220| Auto Program 35
221 ó 226| Auto Program 36
227 ó 232| Auto Program 37
233 ó 238| Auto Program 38
239 ó 255| Sound Active Program
Channel| Function| Value| Percent/Setting
---|---|---|---

8

| Program Speed

(when Ch. 7 is 010 ó 238)

| 000 ó 255| Program speed, slow to fast
Sound Sensitivity

(when Ch. 7 is 239 ó 255)

| 000 ó 010| Sound sensitivity off
011 ó 255| Sound sensitivity level

9

| ****

Dimmer Speed Mode

| 000 ó 051| Dimmer Speed set by Display Menu
052 ó 101| Dimmer Speed Mode Off
102 ó 152| Dimmer Speed Mode 1 (fast)
153 ó 203| Dimmer Speed Mode 2
204 ó 255| Dimmer Speed Mode 3 (slow)

3CH

Pixel Mapping Personalities

DMX pixel mapping personalities assign individual DMX control to each bulb in the Festoon string/s. The Pixel Mode will allow for custom color selection for each bulb. The Pixel+ Mode allows for custom color control, dimmer control, strobe control, and auto/sound program control. Select Pixel or Pixel+ under the Channel setting to use the Pixel Mapping Personalities. The pixel mapping personalities depends on the number of festoon strings you have connected. Every 20 bulbs is considered one LED string.

Up to 2 Festoon EXT strings can be connected to the first string of 20 bulbs. Set the quantity of EXT strings under the Led Strg setting.

For example, if there is 1 Festoon string of 20 bulbs and 1 Festoon EXT string of 20 bulbs connected, the Led Strg setting in the menu must have “2 strg” selected.

Pixel Mode

Pixel+ Mode

3

| ****

Auto & Sound Programs

| 000 ó 010| No function
011 ó 016| Auto Program 1
017 ó 022| Auto Program 2
023 ó 028| Auto Program 3
029 ó 034| Auto Program 4
035 ó 040| Auto Program 5
041 ó 046| Auto Program 6
047 ó 052| Auto Program 7
053 ó 058| Auto Program 8
059 ó 064| Auto Program 9
065 ó 070| Auto Program 10
071 ó 076| Auto Program 11
077 ó 082| Auto Program 12
083 ó 088| Auto Program 13
089 ó 094| Auto Program 14
095 ó 100| Auto Program 15
101 ó 106| Auto Program 16
107 ó 112| Auto Program 17
113 ó 118| Auto Program 18
119 ó 124| Auto Program 19
125 ó 130| Auto Program 20
131 ó 136| Auto Program 21
137 ó 142| Auto Program 22
143 ó 148| Auto Program 23
149 ó 154| Auto Program 24
155 ó 160| Auto Program 25
161 ó 166| Auto Program 26
167 ó 172| Auto Program 27
173 ó 178| Auto Program 28
179 ó 184| Auto Program 29
185 ó 190| Auto Program 30
191 ó 196| Auto Program 31
197 ó 202| Auto Program 32
203 ó 208| Auto Program 33
209 ó 214| Auto Program 34
215 ó 220| Auto Program 35
221 ó 226| Auto Program 36
227 ó 232| Auto Program 37
233 ó 238| Auto Program 38
239 ó 255| Sound Active Program
CHANNEL| FUNCTION| VALUE| PERCENT/SETTING
---|---|---|---

4

| Program Speed

(when Ch. 3 is 010 ó 238)

| 000 ó 255| Program speed, slow to fast
Sound Sensitivity

(when Ch. 3 is 239 ó 255)

| 000 ó 010| Sound sensitivity off
011 ó 255| Sound sensitivity level
5| Pixel 1 Red| 000 ó 255| 0-100%
6| Pixel 1 Green| 000 ó 255| 0-100%
7| Pixel 1 Blue| 000 ó 255| 0-100%
8| Pixel 2 Red| 000 ó 255| 0-100%
9| Pixel 2 Green| 000 ó 255| 0-100%
10| Pixel 2 Blue| 000 ó 255| 0-100%
11| Pixel 3 Red| 000 ó 255| 0-100%
12| Pixel 3 Green| 000 ó 255| 0-100%
13| Pixel 3 Blue| 000 ó 255| 0-100%
14| Pixel 4 Red| 000 ó 255| 0-100%
15| Pixel 4 Green| 000 ó 255| 0-100%
16| Pixel 4 Blue| 000 ó 255| 0-100%
17| Pixel 5 Red| 000 ó 255| 0-100%
18| Pixel 5 Green| 000 ó 255| 0-100%
19| Pixel 5 Blue| 000 ó 255| 0-100%
20| Pixel 6 Red| 000 ó 255| 0-100%
21| Pixel 6 Green| 000 ó 255| 0-100%
22| Pixel 6 Blue| 000 ó 255| 0-100%
23| Pixel 7 Red| 000 ó 255| 0-100%
24| Pixel 7 Green| 000 ó 255| 0-100%
25| Pixel 7 Blue| 000 ó 255| 0-100%
26| Pixel 8 Red| 000 ó 255| 0-100%
27| Pixel 8 Green| 000 ó 255| 0-100%
28| Pixel 8 Blue| 000 ó 255| 0-100%
29| Pixel 9 Red| 000 ó 255| 0-100%
30| Pixel 9 Green| 000 ó 255| 0-100%
31| Pixel 9 Blue| 000 ó 255| 0-100%
32| Pixel 10 Red| 000 ó 255| 0-100%
33| Pixel 10 Green| 000 ó 255| 0-100%
34| Pixel 10 Blue| 000 ó 255| 0-100%
35| Pixel 11 Red| 000 ó 255| 0-100%
36| Pixel 11 Green| 000 ó 255| 0-100%
37| Pixel 11 Blue| 000 ó 255| 0-100%
38| Pixel 12 Red| 000 ó 255| 0-100%
39| Pixel 12 Green| 000 ó 255| 0-100%
40| Pixel 12 Blue| 000 ó 255| 0-100%
41| Pixel 13 Red| 000 ó 255| 0-100%
42| Pixel 13 Green| 000 ó 255| 0-100%
43| Pixel 13 Blue| 000 ó 255| 0-100%
44| Pixel 14 Red| 000 ó 255| 0-100%
45| Pixel 14 Green| 000 ó 255| 0-100%
46| Pixel 14 Blue| 000 ó 255| 0-100%
47| Pixel 15 Red| 000 ó 255| 0-100%
CHANNEL| FUNCTION| VALUE| PERCENT/SETTING
---|---|---|---
48| Pixel 15 Green| 000 ó 255| 0-100%
49| Pixel 15 Blue| 000 ó 255| 0-100%
50| Pixel 16 Red| 000 ó 255| 0-100%
51| Pixel 16 Green| 000 ó 255| 0-100%
52| Pixel 16 Blue| 000 ó 255| 0-100%
53| Pixel 17 Red| 000 ó 255| 0-100%
54| Pixel 17 Green| 000 ó 255| 0-100%
55| Pixel 17 Blue| 000 ó 255| 0-100%
56| Pixel 18 Red| 000 ó 255| 0-100%
57| Pixel 18 Green| 000 ó 255| 0-100%
58| Pixel 18 Blue| 000 ó 255| 0-100%
59| Pixel 19 Red| 000 ó 255| 0-100%
60| Pixel 19 Green| 000 ó 255| 0-100%
61| Pixel 19 Blue| 000 ó 255| 0-100%
62| Pixel 20 Red| 000 ó 255| 0-100%
63| Pixel 20 Green| 000 ó 255| 0-100%
64| Pixel 20 Blue| 000 ó 255| 0-100%
65| Pixel 21 Red| 000 ó 255| 0-100%
…| …| …| …
125| Pixel 41 Red| 000 ó 255| 0-100%
…| …| …| …
185| Pixel 60 Red| 000 ó 255| 0-100%
186| Pixel 60 Green| 000 ó 255| 0-100%
187| Pixel 60 Blue| 000 ó 255| 0-100%

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>