iGear iG-DLSO3 Nutri Blender Portable Blender User Manual

iGear iG-DLSO3 Nutri Blender Portable Blender

Warning:
To avoid injuries caused by misused ,Please read all instructions carefully and follow it strictly before using the products .

Description of Parts

1. 1.Top lid
2. Blender cover
3. Blender Jar
4. Blender blade
5. Main Housing
6. Bottom plate
7. Pulse button
8. Blending button
9. Filter
10. Battery charging
11. USB outlet
12. Rubber gasket for USB

Specification

Important Safeguards

Warning

1. Please read this instructions carefully before using the product for the first time and keep it in a safe place for future reference.
2. Do not immerse main housing and battery into the water, nor flushing it with water.
3. Do not use product if nobody unattended.
4. Do not place the blender on or near the heat resourcing.
5. Do not switch on when the bottle is empty or over-loaded.
6. Do not disassemble the product by yourself if it is damaged, please consult the manufacturer or equally qualified personnel to replace or repair the damaged product. after the appliance malfunction, or if it is dropped or damaged in any manner.
7. Do not clean this blender by hot water that over 60°C, not for microwave.
8. Do not immerse blender into dishwasher for cleaning.
9. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
10. Children should not play or touch the product; Do not leave the product unattended when it’s under operation.
11. When the blender is working, strictly prohibit to touch the rotating parts of the product, install or remove the blender jar,lid and other parts, do not place hands and other things inside the blender cup. If necessary, please turn off the blender to avoid injuries.
12. Be careful of sharp blade when cleaning and operating.
13. Please turn off the power when changing the blender parts.
14. Please disconnect the machine’s power and switch before disassembling and cleaning.

Cautions

1. The product is intended for household use only.
2. 2.Before moving the product,please make sure the blender has been properly installed.
3. The product only can work 30s Continuously and use again after the product has cooled down.
4. Do not use other accessories that not supplied with this appliance.
5. Before turning on the product,please make sure the blender has been properly installed.
6. The product should not operate at no- load or overload.
7. Do not immerse blender or any accessories into dishwasher for cleaning.
8. The product is intended for blending only, can not mincing and grinding and so on.

Product Operation Guide

Before first use,please make sure the battery is full and please clean it and assemble well,also the blender cup should be fixed well the mark of housing body.

1. Please wash well the fruit and roughly cut into small pieces,(1.5cm) for better blending effect.（See picture1）
2. Please put all ingredients into bottle and pour proper liquid. (The recommended ratio of liquid to food is 3:2.（See picture2）
3. Please rotate blender lid and press top lid tightly in clockwise direction,cross the product and then press “M”button around 1s.（See picture3）(as long as the light is lit and the blender is working)in avoid of the blades stuck,please place well the blender when it’s working .(Shake the product gently while working, and mix the fruit and vegetable granules in the cup for better blending effect).
4. After blending ,please press “M”button to stop working(make sure the light turn off and then finish the juicing)If the desired effect is not reach ,please wait for over 60s before carrying out again.
5. Please rotate the blender lid in anti-clockwise direction,and fall out the juicer(or open the top lid to drink).
6. Please put the filter if needed and fall out the juicer(or open the top lid to drink).

The”PULSE”mode
Please press “Pulse” button before loosening your hands to let the product work intermit-tently. (This mode can be used when you wash the product or blend the fruit for short time)In avoid of damaging the battery,please do not press “P” button over 30s.

Cautions

1. The product is with magnetic induction safety switch mode, the blender can be used  （See picture4）.
2. After taking out the blender jar and main body,please assemble well the waterproof ring, in avoid of liquid spill out.Do not blend the boiling liquid (this product should not immerse into hot water that over 60°C ).
3. Do not add fruit materials beyond maximum scale,otherwise will influence the blend effect.

Charging mode

1. For blender charging please connect well USB directly and then the green light of “P”button is flashing.
2. When the product is insufficient,the red light of “P”button is flashing.
   Note: The product does not distribute the corresponding adapter.In case of battery damage or danger,please use (5V.1A) to charge the product.

Product maintenance

1. Please make sure that the blade is stopped before cleaning.
2. Pour some water and press”P”button and shake gently for cleaning the blender.
3. Please use a soft brush when you wash the blender cup,please do not touch the blender blade .
4. Do not clean the base by flushing with water or submerging in water,can wipe it with damp cloth.
5. Do not immerse blender or any accessories into dishwasher for cleaning.
6. In order to prevent the motor from damp and mouldy,please keep it in a dry and ventilated place if the product not be used for a long time.
7. To avoid the growth of abnormal sell or bacteria,please clean up the product after each use.
8. In avoid of damaging the battery,please fully charged and stored it every 3 months it if the product not be used for a long time.
9. Before storing the product,please wipe it with dry cloth and make sure its clean and dry.

Note

1. Do not clean the product with steel wire balls, abrasive cleaners or corrosive liquids.(for example, alcohol, gasoline or acetone)
2. After using the products,please clean up immediately.
3. Do not put the base with motor ,battery component by flushing with water.
4. Please keep the USB port in dry when clean up the housing base.

Important Tips
Instruction use method:Firstly,please fixed well the filter and then rotate the blender lip, finally ,open the top lid and drink it directly.

Question & Answers

housing body can not match well

2. Battery is running low

| 1. Please match well the symbol

“T”of blender jar and symbol “..& “of housing body again

2. Please charge it under normal

circumstances

Automatic shutdown after blending 60s| The time of blend Under normal circumstances| Normal
Shutdown and the red light of “P” is

flashing

| Battery is running low| Please charge it under normal circumstances
The product does not work after adding

fruit

| 1. The fruit is too big to stuck the blade

2. Battery is running low

| 1. Fruit materials should be cut into small pieces first(1.5cm) please cross the product and then shake it gently.

2. Please charge it again.

Water leakage| The Silica gel ring does not match well| Please assemble well the silica gel ring again

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>