emerio HO-121844.1 Oil Radiator Instruction Manual
- June 5, 2024
- emerio
Table of Contents
- emerio HO-121844.1 Oil Radiator
- SAFETY INSTRUCTIONS
- DESCRIPTION
- WHEELS ASSEMBLY
- Using the Appliance
- MAINTENANCE AND CARE
- STORAGE
- GUARANTEE AND CUSTOMER SERVICE
- ENVIRONMENT FRIENDLY DISPOSAL
- Information requirements for electric local space heaters
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
emerio HO-121844.1 Oil Radiator
This product is only suitable for well insulated spaces or occasional use.
SAFETY INSTRUCTIONS
Before use make sure to read all of the below instructions in order to avoid injury or damage, and to get the best results from the appliance. Make sure to keep this manual in a safe place. If you give or transfer this appliance to someone else make sure to also include this manual. In case of damage caused by user failing to follow the instructions in this manual the warranty will be void. The manufacturer/importer accepts no liability for damages caused by failure to follow the manual, a negligent use or use not in accordance with the requirements of this manual.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Children of less than 3 years should be kept away unless continuously supervised.
- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- CAUTION — some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- WARNING: In order to avoid overheating, do not cover the heater.
- The heater must not be located immediately below a socket-outlet.
- Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- This heater is filled with a precise quantity of special oil. Repairs requiring opening of the oil container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak; when scrapping the heater, follow the regulations concerning the disposal of oil.
- Means “DO NOT COVER “.
- Before inserting the plug into the mains socket, please check that the voltage and frequency comply with the specifications on the rating label.
- Disconnect the mains plug from the socket when the appliance is not in use and before cleaning.
- Ensure that the mains cable is not hung over sharp edges and keep it away from hot objects and open flames.
- Do not immerse the appliance or the mains plug in water or other liquids. There is danger to life due to electric shock!
- To remove the plug from the plug socket, pull the plug. Do not pull the power cord.
- Do not touch the appliance if it falls into water. Remove the plug from its socket, turn off the appliance and send it to an authorized service center for repair.
- Do not plug or unplug the appliance from the electrical outlet with a wet hand.
- Never attempt to open the housing of the appliance, or to repair the appliance yourself. This could cause electric shock.
- Never leave the appliance unattended during use.
- This appliance is not designed for commercial use.
- Do not use the appliance for other than intended use.
- Do not wind the cord around the appliance and do not bend it.
- The oil heater may only be used in the upright position.
- The unit must be positioned away from flammable or easily deformable objects during use.
- Place the oil heater on the floor at least 90 cm away from the wall and any other objects, such as furniture, curtains or plants.
- The surface temperature of the appliance is high; do not touch it, only at the handle.
- This heating device is not suitable for assembling in vehicles and machines.
- Regarding the information for the assembly of base support, please refer to the below paragraph of the manual.
DESCRIPTION
- Heating elements
- Handle
- Thermostat knob
- Power switch
- Wheel
- Cord storage
- Indicator light
WHEELS ASSEMBLY
- Assemble the four wheels to the two base shelves.
- Turn the heater upside down.
- Position the wheel base assemblies between the end fins.
- Traverse the clips through the appliance body and base shelves.
- Tighten the screw.
Using the Appliance
- Set the thermostat knob to the minimal position and insert the plug to the power supply.
- Press the power switch: I=1000W; II=1500W; I+II=2500W
- Turn the thermostat knob in a clockwise direction to the max position. The indicator light will illuminate.
- Once the room temperature has reached the desired value, turn the thermostat knob slowly in anti-clockwise direction until you hear a “click” sound; this is the setting temperature.
- The appliance will automatically maintain the setting temperature. It will switch on when the room temperature is below the setting, and switch off if it is above the setting.
NOTE:
- The room must be in a good tight condition; if not, the heating results will be insufficient.
- After use, turn the thermostat to the minimal position and unplug the appliance from the power supply.
SAFETY SYSTEM:
- The appliance has a safety system which automatically switches the unit off when overheated.
- If overheating occurs, remove the plug from the socket, push the buttons to switch the unit off and let it cool down for at least 10 minutes. Put the plug in the socket and switch the heater on.
- This heater is equipped with a tilt protection safety device. It has tilt protection safety functions and automatically switches off the power. For safety reasons, the unit will automatically switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.
MAINTENANCE AND CARE
- The oil heater should be cleaned regularly; wipe the dust off the surface of the fins. This improves radiation.
- Unplug the appliance from the power supply and allow the appliance to cool down completely.
- Wipe the appliance with a soft damp cloth. Do not use detergent or abrasives.
- Do not scratch the fin surfaces with sharp tools. Damages of the coat layer result in rusty spots.
STORAGE
- Ensure that the oil heater is cooled off completely.
- Roll up the power cord in the cord storage when the heater is not in use.
- Store the appliance in a cool, dry place.
Warning
If you have a problem with your heater, please do not attempt to repair it
yourself. Doing so may cause damage or personal injury.
TECHNICAL DATA:
Operating voltage: 220-240V~ 50Hz
Power consumption: 2500W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If,
despite all care, damage has occurred during production or transportation,
please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following
guarantee: For the purchased device we provide 2 years guarantee, commencing
from the day of sale. If you have a defective product, you can directly go
back to the point of purchase. Defects which arise due to improper handling of
the device and malfunctions due to interventions and repairs by third parties
or the fitting of non-original parts are not covered by this guarantee. Always
keep your receipt, without the receipt you can’t claim any form of warranty.
Damage caused by not following the instruction
manual, will lead to a void of warranty, if this results in consequential
damages then we will not be liable. Neither can we hold responsible for
material damage or personal injury caused by improper use if the instruction
manual is not properly executed. Damage to accessories does not mean free
replacement of the whole appliance. In such case please contact our service
department. Broken glass or breakage of plastic parts is always subject to a
charge. Defects to consumables or parts subjected to wearing, as well as
cleaning, maintenance, replacement of said parts or shipping and
transportation costs to and from any place of repair are not covered by the
warranty and are to be paid.
ENVIRONMENT FRIENDLY DISPOSAL
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe
recycling.
Supplier:
Emerio Switzerland AG
Sihlbruggstrasse 107
6340 Baar
Switzerland
Declare that the product detailed below:
Information requirements for electric local space heaters
Model identifier(s):
Item| Symbol| Value| Unit| Item| Unit
Heat output| | | | Type of heat input, for
electric storage
local space heaters only (select one)
|
Nominal heat
output
| Pnom| 2,5| kW| manual heat charge control, with
integrated thermostat
| NA
Minimum heat
output (indicative)
| Pmin| 0| kW| manual heat charge control with room and/or outdoor temperature
feedback| NA
Maximum continuous heat
output
| Pmax,c| 2,5| kW| electronic heat charge control with room and/or outdoor temperature
feedback
| NA
Auxiliary
electricity consumption
| | | | fan assisted heat output| NA
At nominal heat
output
| elmax| 0| kW| Type of heat output/room temperature
control (select one)
At minimum heat
output
| elmin| 0| kW| single stage heat output and no room
temperature control
| [no]
In standby mode| elSB| 0| kW| Two or more manual stages, no room
temperature control
| [no]
| | | | with mechanic thermostat room
temperature control
| [yes]
| | | | with electronic room temperature
control
| [no]
| | | | electronic room temperature control
plus day timer
| [no]
| | | | electronic room temperature control
plus week timer
| [no]
| | | | Other control options (multiple selections
possible)
| | | | room temperature control, with
presence detection
| [no]
| | | | room temperature control, with open
window detection
| [no]
| | | | with distance control option| [no]
---|---|---|---|---|---
| | | | with adaptive start control| [no]
| | | | with working time limitation| [no]
| | | | with black bulb sensor| [no]
Contact details| Emerio Switzerland AG Sihlbruggstrasse 107
6340 Baar
Switzerland
Satisfies the requirement of the Council Directives:
COMMISSION REGULATION (EU) No 2015/1188 of 28 April 2015 and Amending
COMMISSION REGULATION (EU) 2016/2282 implementing Directive 2009/125/EC of the
European Parliament and of the Council with regard to ecodesign requirements
for local space heaters
Regarding information for consumers on how to install, use and maintain the
product, WEEE information, please check the instruction manual provided with
packaging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>