FANTINI H021U Milano Slim Bathroom Shower Column in Stainless Steel Instruction Manual
- June 5, 2024
- FANTINI
Table of Contents
FANTINI H021U Milano Slim Bathroom Shower Column in Stainless Steel
Technical information
| MILANOSLIM
---|---
Minimum hydraulic pressure: Maximum hydraulic pressure: Hot water max
temperature:| 29 PSI
72PSI
176°F
Weight:| – H001/H091 : 16.5 lbs + 24 lbs
Recommended installation conditions:
– Hydraulic pressure:
– Hot water temperature:
| ****
43 PSI
from 131°F to 149°F
Versions
The MILANOSLIM shower is available in the THERMOSTATIC version and consists of the following:
- IN-WALL UNIT including:
-
- A steel BOX with inlet pipes for the connection of cold and hot water, the system for the waterfall head shower connection.
- A MIXER BODY with thermostatic cartridge and a DIVERTER BODY with 3-way DIVERTER cartridge.
- A lower BODY for the connection of the water plug for the hand shower.
The built-in part must be prepared and connected when completing the bathroom sanitary fixtures right before carrying out the facing. 1/2” inlets.
- A steel BOX with inlet pipes for the connection of cold and hot water, the system for the waterfall head shower connection.
NOTE: The in-wall unit must be installed at framing stage.
MILANOSLIM TRIM including:
- UPPER SHOWER HEAD IN STAINLESS STEEL with antilime system (to connect to the built-in part after carrying out the facing).
- PANEL IN STAINLESS STEEL WITH FRONT JETS.
- WATER PLUG WITH HAND SHOWER AND FLEXIBLE.
- THERMOSTATIC MIXER HANDLE AND DIVERTER HANDLE.
MilanoSlim functioning:
The lower handle controls the thermostatic cartridge to regulate the requested temperature. The upper handle opens/closes the water and diverts it to the following outlets:
- UPPER SHOWER HEAD
- FRONT JET
- HANDSHOWER
Base materials:
Stainless Steel AISI 316 38 Polished Stainless Steel 93 Brushed Stainless
Steel
Guidelines for the set-up
Refer to the instructions manual for correct installation guidelines.
Shower column
- 1/2” Thermostatic mixer
- Three-way diverter with integrated volume control
- Rainfall showerhead
- Body spray
- FIT handshower
- Anti-limescale system
- 48” Vinyl hose
- Solid stainless steel construction
Trim:
- Polished Stainless steel 72 38 H001U
- Brushed Stainless steel 72 93 H001U
Art. H001U
Rough:
- Polished Stainless steel
- Brushed Stainless steel
Art. H091U
Fantini USA Inc.
A&D BUILDING – 150 East 58th Street, 8th floor – New York, NY 10155
Ph. 212 308 8833 – Fax 212 308 8820
www.fantiniusa.com –
fantini@fantiniusa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>