FANTINI S813SB Venezia Collection Kitchen wall Mounted Washbasin Tap Instruction Manual
- June 1, 2024
- FANTINI
Table of Contents
FANTINI S813SB Venezia Collection Kitchen wall Mounted Washbasin Tap
Product Information
Specifications
- Brand: Venezia by Venini
- Models: ART. S713SB, ART. S813SB, ART. S758SWB
- Required Tools: Teflon tape, 2mm, 3mm, 10mm tools
- Pressure Range:
- Minimum Pressure: 1.5 BAR
- Maximum Pressure: 10 BAR
- Recommended Working Pressure: 2-5 BAR
- Max. Water Temperature: 85 – 99°C
- Max. Inlet Pressure Difference (hot-cold): 5 BAR
Product Usage Instructions
Installation
- Prepare the required tools including Teflon tape and 2mm, 3mm,10mm tools.
- Follow the specific installation instructions for each model (S713SB, S813SB, S758SWB) as indicated in the manual.
- Ensure proper connections in G1/2 fittings for water supply.
- Check for leaks and ensure a secure fit of all components.
Initial Use Guidelines
- For the first use or after a prolonged period of inactivity,discard the first half-liter of dispensed drinking water.
- In case of extended absence, shut off the plumbing system to avoid any issues.
- Regularly inspect the system for water-tightness and leaks.
Frequently Asked Questions (FAQ)
Q: What should I do if the water pressure is above 5 BAR?
A: If the water pressure exceeds 5 BAR, it is recommended to install a
flow restrictor upstream to regulate temperature and prevent vibrations.
Q: How should I handle the different pressure ranges mentioned?
A: The minimum pressure required is 1.5 BAR, while the maximum pressure
tolerated is 10 BAR. It is advisable to maintain a working pressure between
2-5 BAR for optimal performance.
Q: Is it necessary to use specific tools during installation?
A: Yes, you will need Teflon tape and tools of 2mm, 3mm, and 10mm sizes
for proper installation.
ART. S713SB
ART. S813SB
ART. S758SWB
NECESSARY TOOLS
TECHNICAL DETAILS
| Minimum pressure | 1 BAR |
|---|---|
| Minimum pressure | 10 BAR |
| Reccomended working pressure | 2-5 BAR |
| Max. water temperature | 80° C – 176° F |
| Maximum water temperature reccomended | 65° C – 149° F |
| Maximum in-let pressure difference (hot – cold) | 1.5 BAR |
If water pressure is above 5 bar, it is advisable to install a flow restrictor upstream of the water supply to avoid vibrations and regulate temperature.
INSTALLATION
These mixers can be used with high-pressure hot water accumulators or with instant water heaters.
These mixers can be used with high-pressure hot water accumulators or with instant water heaters.
INSTRUCTION
On first use or following prolonged periods of inactivity, do not use the first half-litre of drinking water dispensed. Shut off the plumbing system in the event of a long absence. Check the water-tightness regularly.
On first use or following prolonged periods of inactivity, do not use the first half-litre of drinking water dispensed. Shut off the plumbing system in the event of a long absence. Check the water-tightness regularly.
CARTRIDGE REPLACEMENT
- Replace following the instructions in reverse order (4-3-2-1).
SUBSTITUTE AERATOR – REPLACEMENT
- Replace following the instructions in reverse order (D-C-B-A).
Fratelli Fantini Spa
via Buonarroti, 4
Pella (NO) Italia
T +39 0322 918411 r.a.
F +39 0322 969530
[email protected]
www.fantini.it