Fantini Cosmi CH180K3 Wireless Programmable Thermostats Installation Guide
- June 12, 2024
- Fantini Cosmi
Table of Contents
CH180K3
WIRELESS 3-ZONE THERMOREGULATION KIT
WITH WIFI CONNECTION
PROGRAMMABLE THERMOSTATS,
THERMOSTATS
AND TEMPERATURE CONTROLS
CH180K3 Wireless Programmable Thermostats
- Preset and ready to use kit, for 3 radiators control
- 3-zone temperature control
- To control the heating systems
- Remote control through APP Intelliclima+ for Smartphone and Tablet
- Expansion possibility for the cooling and dehumidification control system
- Expansion possibility up to 8 temperature zones
Kit composition| 1 CH180RFWIFI3 O60RF| weekly wireless programmable
thermostat with WiFi connection
---|---|---
3 O60RF| wireless radiator actuators
INSTALLATION
-
PROGRAMMABLE THERMOSTAT
CH180RFWIFI has to be installed on the wall or in a 3 modules or round flush mounting box, at about 1.5 meters above the floor. -
ACTUATOR
The wireless actuator can be quickly and easily mounted on all common valves with 30×1.5 thread.
Scope of delivery: 1 O60RF actuator; 1 coupling ring; 1 adapters set with four parts (additional adapters on page 4); 1 screw and nut; 1 removing tool and this installation manual.
DIMENSIONS mm
-
PROGRAMMABLE THERMOSTAT
-
ACTUATOR
HOMOLOGATION AND STANDARD
- Complies with EN 60730-1 standards;
- Responding to Directive 2014/53 / EU (RED).
- ErP Classification (Reg. EU 811/2013 – 813/2013):
◊ Classe VIII; 5%
CH180RFWIFI ELECTRIC FEATURES
Power supply | 230V-50Hz |
---|---|
Maximum absorbed power | 5 W |
Contacts rating | 5(3)A 250 Vca |
Type of action | 1 B.U. (connection micro-switch) |
Output type | ■ 1 relay for heating/cooling or humidity systems (3 screw |
clamps (closed + open)
Software| A class
Electric insulation| Double insulation
Pulse voltage| 4000V
- ELECTRICAL CONNECTION
O60RF ELECTRIC FEATURES
Power supply | 2 alkaline batteries (1.5V AA) |
---|---|
Battery life | up to 2 years under standard conditions of use |
Temperature regulation range | 2 ÷ 40 °C, increment 0.1°C |
Measurement scale/room T display | 30 ÷ 70%, increment 1% |
Measurement scale/room T display | – 50 ÷ + 50 °C |
Relative humidity adjustment range | 0 ÷ 100% |
Differential | 0.3 ÷ 5 K |
Thermal gradient | 4 K/h |
Maximum room temperature | 45°C |
WiFi connection | 2.4 GHz (802.11 b/g/n) |
Radio frequency | 868 Mhz |
Maximum radio frequency power transmitted | < 10mW |
Managements | ■ General heating, cooling and humidity control |
■ Zone heating, cooling and humidity control
■ Maximum 8 control zone
■ Maximum management of 15 devices directly connected to the CH180RFWIFI
■ Maximum management of 114 devices directly connected to network
■ Alarm management to exceed minimum and maximum temperature
■ System lock management to overcome the minimum and maximum temperature
threshold
■ Cooling management by activating the dehumidifier through dew point control
or via a predetermined UR% threshold
■ Summer time / Standard time
■ Remote change over (only with APP)
■ Summer / Winter
■ Auxiliary ON / OFF control for electric users (only with CH175)
Viewing of energy consumption
Display showing system fault anomalies
Correction of the offset of the temperature read
Possibility to associate the names to all the zones
Storage temperature|
Protection degree| IP40
Pollution degree| 2
Display| Italian, English, French, Spanish, German, Russian
Screen lock of CH180RFWIFI and the connected CH120RF| With password and for
display cleaning
Radio frequency| 868Mhz
Maximum radio frequency power transmitted| <10mW
Operating temperature| 0 ÷ 50°C
Storage temperature| 20 ÷ 70°C
Shape type| white ABS
Temperature sensor| internal
Standard connectio| M30x1.5
Protection degree| IP30
O60RF is compatible with the following thermostatic radiator valves brands:
BRAND | ADAPTER CODE |
---|---|
Luxor | unnecessary |
Honeywell | unnecessary |
Oventrop | unnecessary |
Caleffi (338, 339, 401, 402, 421, 425, 426, 4001, 4003, 4004, 3380, 455) |
309703
Caleffi| 309706
Danfoss (RA)| included
Danfoss (RAV)| included
Danfoss (RAVL)| included
Watts /Cazzaniga| unnecessary
FAR| 309706
R.B.M.| 309706
Giacomini| 309704
Itap| unnecessary
Herz| 309705
Siemens| 309706
-
Code 309703: adapter for Caleffi valve
-
Code 309704: adapter for Giacomini valve
-
Code 309705: adapter for Herz valve
-
Code 309706: adapter for M30x1.5 valve (10 pcs)
CH180K3 OPERATION
-
CH180RFWIFI pre-set programmable thermostat performs the supervisor functions, managing 3 zones and communicating with the O60RF wireless actuators for radiators.
-
The already preset components are shared as follows:
◊ zone 1 = 1 CH180RFWIFI + 1 O60RF;
◊ zone 2 = 1 O60RF;
◊ zone 3 = 1 O60RF; -
CH180RFWIFI uses a program that allows you to set the temperature and time profiles for each zone.
-
It is also possible to correct the offset of the read temperature from each zone (i.e if the zone is controlled by O60RF head placed in the wrong position).
-
On the white positive backlight, LCD touch screen is possible view, through an intuitive graph, the energy consumption of the entire system
-
CH180RFWIFI has 6 touch-keys, which function depends on the situation and is described by the symbol that appears on the display.
-
CH180RFWIFI programmable thermostat allows different modes of use, called programs:
-
* MAN Manual program
- AUTO Weekly program
- HOLIDAY Daily program
- JOLLY Temporary program
- OFF Switched off system or antifreeze program
-
- Activation status: heating, cooling or dehumidification
- Temperatura misurata Celsius / Fahrenheit
- Antenna
- Measured humidity
- Multifunctional touch icons
- Zone
- Day
- Operating mode
- Graphic portion: messages / temperature timing
[ MAN ]
- MANUAL PROGRAM
The programmable thermostat adjust the room temperature using the temperature set in 24 hours.
TMAN adjustable temperature from 2°C to 40°
[AUTO]
- AUTO – WEEKLY PROGRAM
CH180RFWIFI programmable thermostat manages the set temperatures according to the time programs on the weekly profi le.
You can set a different weekly profile for each zone.
It is provided with preset winter programs and preset summer programs.
In the AUTO mode it is possible to set 2 temperature levels TCOM e TECO (comfort temperature and economy temperature).
TCOM adjustable temp. from 2 to 40 °C
TECO adjustable temp. from 2 to 40 °C
Note: TCOM > TECO (winter)
TECO > TCOM (summer)
[ HOLIDAY ]
- HOLIDAY – SPECIAL DAILY PROGRAM
If you stay at home on a public holiday, you can set an extra daily profi le (“H”) different for each zone.
This mode stops when it is selected another operating mode. In the HOLIDAY mode it is possible to set 2 temperature levels TCOM e TECO (comfort temperature and economy temperature).
TCOM adjustable temp. from 2 to 40 °C
TECO adjustable temp. from 2 to 40 °C
Note: TCOM > TECO (winter)
TECO > TCOM (summer)
[JOLLY]
-
JOLLY – TEMPORARY PROGRAM
The weekly programmable thermostat manages the system using 1 set temperature over a variable period of time (sets the time and day to which the set temperature is to be kept*). At the end of the set time, the programmable thermostat returns to the previously used operation mode.
This function can be excluded at any time by setting a different operation mode.
TJ adjustable temp. from 2°C to 40°C -
90 days maximum and 30 minutes resolution
-
OFF – SWITCHED OFF SYSTEM OR ANTIFREEZE PROGRAM
The selected system is switched off. During WINTER mode keeps the temperature antifreeze.
TA antifreeze adjustable temp from 2 to 7 °C -
CH180K3 kit can be extended for the cooling and humidification functioning managing up to 8 temperature zones through the Fantini Cosmi configurator ref. 1590880, the Fantini Cosmi thermostats ref. CH120RF, the boiler actuators or zone valve ref. CH175 and the actuators ref. O60RF to control more radiators.
-
REMOTE CONTROLL THROUGH APP Intelliclima+
The Intelliclima+ APP can be free downloaded from a smartphone or tablet. With
Intelliclima+ you can:
- Switch the heating / cooling system ON or OFF;
- Check the temperature and humidity set in each zone;
- Check the state of your system in real time;
- Choose ideal temperature at any time and until when it set;
- Create the weekly or daily program or choose from those preset for each zone;
- Optimise comfort and save energy;
- Receive push notifications of generic alarms and anomalies system;
- Manages ON / OFF an auxiliary electrical utility through the temperature timing;
- Monitoring the energy consumption of the system;
- Share the programmable thermostat with multiple users.
- EXAMPLE OF INFORMATIONS FOR MULTI-ZONE HEATING SYSTEMThe Intelliclima+ APP is available for free on:
CH180K2 KIT SYSTEM EXAMPLE
SYSTEM WITH RADIATORS
- CH180RFWIFI “MASTER” programmable thermostat directly controls the O60RF radiator actuators.
- These actuators receive the current set-point from the programmable thermostat and adjust the temperature in 2 different ways:
- O60RF actuator coupled with the CH180RFWIFI (zone 1) execute the regulation according to the temperature detected by the programmable thermostat;
- O60RF actuator coupled to a zone without thermostat (zone 2 and 3) execute the regulation according to the temperature detected by its internal sensor.
ACCESSORIES
CH180K3 kit is preset and ready to use; however it can expanded with the following accessories:
| CH120RF
WIRELESS TOUCHSCREEN ROOM THERMOSTAT
---|---
| O60RF
WIRELESS RADIATOR ACTUATOR
| CH175
1 RELAY WIRELESS ACTUATOR
| EVWC8R
WIRING CENTER SUITABLE FOR 8 CHANNELS
| EC19
FLOOR TEMPERARURE PROBE
| 1590880
CONFIGURATOR
| 1598089
STAND-ALONE POWER SUPPLY KIT
| 1598090
POWER SUPPLY KIT FOR CH120 -CH180 SERIES
The features referring to the units described in this catalogue are not binding. Fantini Cosmi S.p.A. reserves the right to make modifications without prior notice, owing to technological advances, commercial and normative developments, notwithstanding to keep the main functional features of the described products.