KLARSTEIN 10031575 Kamini Fx-Fxl Electric Fireplace Instruction Manual

: June 5, 2024
: Klarstein

Table of Contents

KLARSTEIN 10031575 Kamini Fx-Fxl Electric Fireplace
TECHNICAL DATA
PRODUCT DATA SHEET
SAFETY INSTRUCTIONS
INSTALLATION
CLEANING AND CARE
DISPOSAL CONSIDERATIONS
MANUFACTURER & IMPORTER (UK)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10031575 Kamini Fx-Fxl Electric Fireplace

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number	10031575, 10035275
Power supply	220-240 V ~ 50 Hz
Power consumption	2000 W
Lighting	2 W LED (10031575)

6 W LED (10035275)

PRODUCT DATA SHEET

Model identifier(s):	10031575, 10035275
Item	Symbol
Heat output

(indicative)

(fan motor)

| elmax| 1,860| kW| | Type of heat output/room temperature control
At minimum heat output

(fan motor)

| elmin| 0,948| kW| | single stage heat output and no room temperature control| no
In standby mode| elSB| N/A| W| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| yes
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| no
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| no
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, Wallstraße 16, 10179, Berlin, Germany

SAFETY INSTRUCTIONS

Check that the voltage indicates on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.
If the supply cord is damaged, it must be replaced by a qualifi ed engineer in order to avoid a hazard.
The fi replace heater must not be positioned directly under the power socket.
Keep furniture, curtains and other fl ammable material at least 1 meter away from the appliance.
Keep out of reach of children and do not allow them to operate this appliance.
This appliance is intended for household use only and should not be used for industrial purposes.
Do not operate this appliance after a malfunction or after being damaged in any way.
Repairs to electrical appliances should only be performed by a qualifi ed electrician.
Improper repairs may place user at serious risk.
Do not run the mains cable under carpets, rugs, etc.
Do not allow the mains cable to hang over sharp edges or come in contact with hot surfaces.
In order to avoid overheating, do not cover the heater.
Do not use this heater with a programmer, timer, separate remote control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
Never immerse the product in water or any other liquid for any reasons.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Do not use the appliance outdoors.
Do not use if you have wet hands.
Never use the appliance on or near hot surfaces.
Do not operate with a damaged cord.
Before cleaning the appliance, make sure it is unplugged from the power and that it is completely cooled.
Do not clean the appliance with abrasive chemicals.
Never use accessories that are not recommended or supplied by the manufacturer. It could cause danger to the user or damage to the appliance.
This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.
Children should be supervised to ensure that they do not play with the appliance.

INSTALLATION

You can install the fireplace as follows:

In an existing chimney or enclosure.
Freestanding on a heat-resistant base.

Note: For the unit to operate as efficiently as possible, do not place it in direct sunlight.

Operation

Remove all packing material.
Place the appliance on a level, stable surface and insert the plug into the power outlet.
When not in use, turn the appliance off and unplug the power cord from the wall outlet.

Control panel

Use the On/Off switch to activate and deactivate the flame effects.
Switching on heating element 1
Connecting heating element 2
Adjust the temperature level with the thermostat control: LOW – MED – HIGH – OFF

Note: When the thermostat control is in the OFF position, the heating function is switched off.

CLEANING AND CARE

Note: Turn off the unit and unplug it from the power outlet. Wait until the unit has completely cooled down before cleaning it.

Use a vacuum cleaner to clean the ventilation slots and grilles.
Remove dust on the outside surfaces with a damp (not wet) cloth.
Do not use strong cleaning agents or abrasives.
Do not spray the device with liquids or immerse it in water or other liquids.
Never open the heater housing.

Storage
Keep the unit in a dust-free place during the low season. Pack it in the original carton. Wind the heater cable cleanly to avoid damaging the cable.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service..

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham- by-Sea BN43 6RE United Kingdom.
visit our site at: www.klarstein.com