KLARSTEIN 10034676 WILDWATER Air Cooler Instruction Manual

: June 5, 2024
: Klarstein

Table of Contents

TECHNICAL DATA
SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
CONTROL PANEL AND KEY FUNCTIONS
FURTHER FUNCTIONS
CLEANING AND CARE
DISPOSAL CONSIDERATIONS
MANUFACTURER & IMPORTER (UK)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10034676 WILDWATER Air Cooler Instruction Manual

Dear Customer,

Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Item number	10034676, 10034677
Power supply	220-240 V ~ 50/60 Hz
Power	80 W
Water tank capacity	2.5 L

SAFETY INSTRUCTIONS

Check the voltage on the rating plate before use. Only connect the appliance to sockets which correspond to the voltage of the appliance.
Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.
Do not place the cord under carpets. Do not cover the cord with small clothes, shirts or other similar elements. Place the cord away from traffic areas in order to avoid any risk of tripping over.
Do not operate the appliance if the cable or plug is damaged.
If the supply cord or plug is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Indoor use only.
Do not cover the machine during using.
Place the appliance on a stable flat horizontal surface. Make sure the appliance is in an upright position during use.
Ensure the appliance is switched OFF before connecting to the mains power supply.
Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains supply connections.
Do not leave this appliance unattended when it’s in use. Turn off and disconnect the appliance when you leave the room for an extended period.
Switch off the appliance and unplug from the mains socket when not in use, before filling, cleaning or other maintain.
To disconnect the appliance, switch it “OFF”, and then remove the plug from outlet. Do not pull the cord to disconnect the plug.
This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.
Use the appliance only as described in this manual.
Do not insert your fingers in the openings of the guard.
Do not leave hair, tissue, tablecloths, clothes or curtains near all openings of the fan, they could be sucked into the fan and be taken within the internal moving partsthat could cause injury or damage.
Do not use the appliance in wet or damp locations such as bathrooms.
Do not operate the appliance when it’s not mounted on its wheels or if it’s lying on the side.
Make sure the cord is completely extended before use.
When in operation, evaporative coolers moisturize the ambient air. Overhumidification of residential rooms should be avoided. Recommendation: 40-50 % relative humidity. Excessive humidity of the air can damage the home and cause health problems.
The appliance may only be set up on water- and moisture-proof flooring materials (spilling some drops of water is unavoidable when the content of the tank is changed).
With each and every change of tank content, completely remove residual water from the equipment. To prevent nucleation, remove residual water from the equipment and water tank every time after three days of use.

PRODUCT DESCRIPTION

Air guide vanes
Atomizing disk
Front cover
Base
Rolls
Protective grilles
Fan blades
Water tank
Rear cover

CONTROL PANEL AND KEY FUNCTIONS

Control Panel

Before first use

When the product is used for the first time, tear off the adhesive tape attached to the unit and remove the paper tube in the water tank (see arrow).

Switch fan on/off

After turning on the unit, press the Fan On/Off button to turn the fan on or off.

Mode Setting

When the power is on, press the Mode button several times to select one of the modes in the following order: Normal Wind > Natural Wind > Sleep Mode. The corresponding indicator will light up on the display.

Normal Wind: The fan speed is constant.
Natural Wind: Simulates natural wind according to the preset program. The fan speed changes at certain intervals.
Sleep Mode: Creates wind according to preset program. The fan speed changes at certain intervals. After 8 hours of operation, the unit automatically switches off.

Speed

This product has four types of speed levels. Press the Speed button several times to adjust the speed. When the highest speed is set and you press the button again, you will return to the lowest speed.

Setting the Off Timer

Press the Timer/Preset button on the control panel or on the remote control several times when the power is on to set the off timer in the following order: 1 > 2 > 3 > 4 > 5 > 6 > 7 > off. The corresponding numbers light up on the display.

Setting the power-on timer

In standby mode, press the Timer/Preset button on the control panel or remote control repeatedly to set the on timer in the following order: 1 > 2 > 3 > 4 > 5 > 6 > 7 > off. The corresponding numbers light up on the display.

FURTHER FUNCTIONS

Automatic display switch-off

If no input is made for more than 40 seconds when the unit is switched on, all displays go out. The display can be reactivated by pressing any key (except On/Off).

Memory function

This product is equipped with a memory function. When the fan is switched off, it stores the current operating status. When the fan is switched on again, it starts in the stored operating state. However, if the unit was in sleep mode before it was switched off, it switches to natural wind mode after it is switched back on.

Automatic switch-off

If no operation takes place for 15 hours in the switched-on state (except in sleep mode), the fan is automatically switched off.

Humidification function

Press the Mist On/Off button to turn the humidification function on or off. The humidification function has no timer and no default settings.

Rotation function

When the rotation function is switched on, press the Rotation key to switch the rotation function on or off.

To fill the water tank

Press the release button (see arrow) and remove the water tank.
Open the cap and fill the water tank with water.
Close the lid of the water tank and reattach the tank to the appliance.

CLEANING AND CARE

Cleaning the humidifier system

Unplug the appliance from the wall outlet before cleaning.
Remove the water tank (see picture on the right). Turn the clamp on the mist eliminator cover (see picture below) to disconnect the connector from the cover. Raise the mist collector cover to separate it from the unit.

Clean the mist separator cover

Hold the cover under the tap. Wash and dry the cover with a soft, dry cloth.

Cleaning the water tank

Unscrew the lid of the water tank and pour clean water into the water tank. Shake the tank to clean its interior and then empty the water. Clean the surface of the water tank with a soft, dry cloth.

Cleaning of the water channel

To clean the water channel, remove the drain plug on the back of the unit and drain the water into the water channel. If the water in your area is very hard, mineral deposits can accumulate on the nebulizer plate and affect nebulizer performance. Mix water with a dash of vinegar and apply to the plate. Allow the mixture to work for 2-5 minutes and then clean the surface with a damp cloth.

Note: Do not clean the water channel under running water to prevent water from entering the interior of the unit and damaging electrical components.

After cleaning

After cleaning, replace the mist eliminator cover in its original position and rotate the clamp on the cover to clamp the cover to the connector and ensure that the float is mounted in the connector in its original position. Then reinsert the drain plug and the water tank.
After cleaning, check that all parts are correctly assembled before putting the fan back into operation.
If you will not be using the unit for a long time, remove the batteries from the remote control and store the unit in a clean, dry place.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.