AquaTech AQ10381 Side Handle Mount Instruction Manual

AquaTech AQ10381 Side Handle Mount Instruction Manual

Compatible with entire range of Sport Housings

Thank you for purchasing this AquaTech Side Handle Mount.

Overview:

The Side Handle Mount is a convenient way to attach the Pro Mount V3 to the side handle of your water housing. A tight, tolerance fit keeps the mount in place and reduces the need for any additional tools or moving parts, keeping installation simple. With the Side Handle Mount attached you can easily mount an action camera to the side handle or attach the LUX Flash Housing to reduce the appearance of backscatter in underwater images.

The Side Handle Mount simply slides onto the side handle of your water housing. Note that only the later model honeycomb style handles will be compatible with the Side Handle Mount.

Please read the following instructions and care tips before using your Side Handle Mount for the

first time. You can also visit our website and YouTube channel for more tips and information.

What’s in the box

• Side Handle Mount (please choose the compatible camera manufacturer option)

Nomenclature

Initial Setup

• Please make sure you have the original 5 MM Hex Key that came with your Sport Housing.
• Remove Side Handle using 5 MM Hex Key
• Now with your Side Handle removed slide the Side Handle Mount over the top section of the Side Handle. Make sure screw holes are facing upwards
• Next take your Pro Mount and place it on top of the Side Handle Mount and screw it in using the middle two screw holes
• After installation the cam mount screw handle should be on the left hand side
• Note regardless of configuration makes sure the the cam mount screw handle is facing away from the Sport Housing

Using the Side Handle Mount Underwater

For best results please make sure you have carefully followed all initial setup instructions prior to taking your Side Handle Mount underwater.

Safety information and warning

• Do not exceed depths of 10m/33ft.
• Do not leave your Sport Housing gear in temperatures greater than 50 C (125 F)

Maintenance and repair

With proper care your gear will last for many years. If in time you do notice any problems that come up or if there is any damage to the equipment please contact AquaTech directly at service@aquatech.net for repairs or servicing.

Limit of liability

In the event of a product warranty claim, AquaTech is only liable up to the value originally paid for the product.

Losses of associated equipment, income or any other financial costs are not covered under this warranty, under any circumstances.

Warranty – 1 year product warranty

We make every effort to ensure that our products are made from the highest quality materials and workmanship. Should you not be completely satisfied with one of our products, we encourage you to contact us so that we can promptly resolve any problem you may be experiencing. Our company representatives will deal with your issue quickly and decisively.

As many AquaTech products are often used in extreme and volatile environments, we are unable to cover for loss or damage of equipment, personal injury or financial loss.

To reduce the risk of these losses occurring, we strongly recommend you read the relevant product instructions carefully and test the product before use.

What does the warranty cover?
This warranty covers any defects in materials or workmanship, with exceptions stated below

What is not covered?
The warranty does not cover damage as the result of normal wear and tear. Determination of what constitutes normal wear and tear will be at the discretion of AquaTech service centers. The warranty guarantee only applies to the original purchaser of the product when purchased from AquaTech direct or through one of our authorized dealers. Therefore, we may ask for proof of purchase. This warranty does not cover for any loss of associated equipment such as cameras, lenses or other associated equipment not sold by AquaTech.

Loss of income, reputation or other financial expenses, such as personal injury are also not covered by this warranty. Shipping costs for returned products are the responsibility of the customer.

How long does the coverage last?
This warranty runs for 1 year from the date your product is received.

What will AquaTech do?
AquaTech will repair any defect that proves defective in materials and workmanship. If repairing is not possible, AquaTech will replace the product, or, offer a store credit for the original purchase price, whichever is agreed to by the customer and AquaTech / Retailer store.

How to get service?
Email contact@aquatech.net and we will advise where to send your product. Alternatively, you may call:
USA: + 1 714 968 6946 Australia: + 61 2 4268 3550

Returns policy – AquaTech online customers only:

AquaTech offers a 14 day return policy for new items purchased directly through our online store or at our physical store. AquaTech will only provide exchanges or store credit for change of mind or incorrectly ordered products. AquaTech will not refund any shipping and credit card costs. Please see our full return policy here. The customer is responsible for shipping cost of the returned items. A restocking charge may be applied in some countries.

How state law applies:
This warranty gives you specific legal rights, and you may have other rights which vary according to the state or country in which you are located.

Legals
Please practice extreme caution when diving into deep water. Only use this product in settings that are within yours or other’s capabilities. Serious injuries or drowning could occur if you or others are not competent for the prevailing conditions. AquaTech (NSW) Pty. Ltd., incorporated in Australia. Australian Business Number: 84 062 580 796

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>