AquaTech B07B7PP14V Pro Mount Instruction Manual
- June 5, 2024
- AquaTech
Table of Contents
AquaTech B07B7PP14V Pro Mount
Thank you for purchasing this AquaTech Pro Mount.
Overview:
The Pro Mount V3 is our most versatile Pro Mount to date. It is designed to
work with a variety of modern AquaTech housings with 2 or 4 inserts at the top
of the water housing.
The Pro Mount V3 is designed to accommodate the new LUX and SYNC Housings
featuring a fast removal slot for these new additions to the AquaTech Water
Housing line up. It can however still also support a Go Pro camera, Lume Cube
lighting and other accessories that have the go pro style mounting profile.
It is also possible to use the AxisGO Go Mount to secure your AxisGO housing
to the top of your water housing using the Pro Mount V3.
The Pro Mount V3 can be installed on the Side Handle Mount or on the top mount
of all the housing models below:
EDGE
REFLEX
EVO III
Elite II
The Go Pro Hero 7 & 6/5 and Hero Session cameras require the use of an
additional housing or mounting cage option supplied by Go Pro to utilise the
AquaTech mount
Note: This option is only available to AxisGO Housings pre AxisGO 12.
AxisGO 12 Housings are not mountable to our Sport Housing range via this
method.
You can also visit our website and YouTube channel for more tips and
information.
What’s in the Box
- Pro Mount V4 * Pro Mount V4 is for use with THE EDGE Sport Housing Range only. Pro Mount V3 is required for use with any other of AquaTech Sport Housings. Using the Pro Mount V4 on any other model than the EDGE range will result in irreparable damage to your Sport Housing. DO NOT USE THE PRO MOUNT V4 ON EVO REFLEX OR ELITE SPORT HOUSINGS, PRO MOUNT V3 REQUIRED.
- 4 x M16mm mounting screws
- 1 x Hex Key installation tool
Nomenclature
Initial Setup
- Remove Pro Mount from bag
- Line up Pro Mount holes on Top Landing Mount
- Make sure slot is facing towards you.
- Install Pro Mount mount by screwing in the four Pro Mount screws securely, using provided Hex key
Using the Pro Mount underwater
For best results please make sure you have carefully followed all initial setup instructions prior to taking your Pro Mount underwater.
Safety information and warning
- Do not exceed depths of 10m/33ft.
- Do not leave your Sport Housing gear in temperatures greater than 50 C (125 F)
Maintenance and repair
With proper care your gear will last for many years. If in time you do notice any problems that come up or if there is any damage to the equipment please contact AquaTech directly at [email protected] for repairs or servicing.
Limit of liability
In the event of a product warranty claim, AquaTech is only liable up to the value originally paid for the product. Losses of associated equipment, income or any other financial costs are not covered under this warranty, under any circumstances.
Warranty – 1 year product warranty
We make every effort to ensure that our products are made from the highest
quality materials and workmanship. Should you not be completely satisfied with
one of our products, we encourage you to contact us so that we can promptly
resolve any problem you may be experiencing. Our company representatives will
deal with your issue quickly and decisively.
As many AquaTech products are often used in extreme and volatile environments,
we are unable to cover for loss or damage of equipment, personal injury or
financial loss.
To reduce the risk of these losses occurring, we strongly recommend you read
the relevant product instructions carefully and test the product before use.
What does the warranty cover?
This warranty covers any defects in materials or workmanship, with
exceptions stated below
What is not covered?
The warranty does not cover damage as the result of normal wear and tear.
Determination of what constitutes normal wear and tear will be at the
discretion of AquaTech service centers. The warranty guarantee only applies to
the original purchaser of the product when purchased from AquaTech direct or
through one of our authorized dealers. Therefore, we may ask for proof of
purchase. This warranty does not cover for any loss of associated equipment
such as cameras, lenses or other associated equipment not sold by AquaTech.
Loss of income, reputation or other financial expenses, such as personal
injury are also not covered by this warranty. Shipping costs for returned
products are the responsibility of the customer.
How long does the coverage last?
This warranty runs for 1 year from the date your product is received.
What will AquaTech do?
AquaTech will repair any defect that proves defective in materials and
workmanship. If repairing is not possible, AquaTech will replace the product,
or, offer a store credit for the original purchase price, whichever is agreed
to by the customer and AquaTech / Retailer store.
How to get service?
Email [email protected] and we will advise
where to send your product. Alternatively, you may call:
USA: + 1 714 968 6946 Australia: + 61 2 4268 3550
Returns policy – AquaTech online customers only:
AquaTech offers a 14 day return policy for new items purchased directly
through our online store or at our physical store. AquaTech will only provide
exchanges or store credit for change of mind or incorrectly ordered products.
AquaTech will not refund any shipping and credit card costs. Please see our
full return policy here. The customer is responsible for shipping cost of the
returned items. A restocking charge may be applied in some countries.
How state law applies:
This warranty gives you specific legal rights, and you may have other
rights which vary according to the state or country in which you are located
Legals
Please practice extreme caution when diving into deep water. Only use this
product in settings that are within yours or other’s capabilities. Serious
injuries or drowning could occur if you or others are not competent for the
prevailing conditions.
AquaTech (NSW) Pty. Ltd., incorporated in Australia. Australian Business
Number: 84 062 580 796