AQUATECH V3 Pro Mount Instruction Manual
- June 13, 2024
- AquaTech
Table of Contents
AQUATECH V3 Pro Mount Instruction Manual
Instruction manual
hank you for purchasing this AQUA TECH Pro Mount.
Overview:
The Pro Mount V3 is our most versatile Pro Mount to date. It is designed to work with a variety of modern AQUA TECH housings with 2 or 4 inserts at the top of the water housing.
The Pro Mount V3 is designed to accommodate the new LUX and SYNC Housings featuring a fast removal slot for these new additions to the AQUA TECH Water Housing line up. It can however still also support a Go Pro camera, Lyme Cube lighting and other accessories that have the go pro style mounting profile.
It is also possible to use the Axis Go Go Mount to secure your Axis Go housing to the top of your housing using the Pro Mount V3.
The Pro Mount V3 can be installed on the Side Handle Mount or on the top mount of all the housing models below
- EDGE
- REFLEX
- EVO III
- Elite II
The Go Pro Hero 7 & 6/5 and Hero Session cameras require the use of an additional housing or mounting cage option supplied by Go Pro to utilize the AQUA TECH mount
. **Note: This option is only available to Axis Go Housings per Axis Go 12. Axis Go 12 Housings are not mountable to our Water Housing range via this method. You can also visit our website and YouTube channel for more tips and information
What’s in the Box
- Pro Mount V4 * Pro Mount V4 is for use with THE EDGE Water Housing Range only. Pro Mount V3 is required for use with any other of AQUA TECH Sport Housings. Using the Pro Mount V4 on any other model than the EDGE range will result in irreparable damage to your Water Housing. DO NOT USE THE PRO MOUNT V4 ON EVE REFLEX OR ELITE SPORT HOUSINGS, PRO MOUNT V3 REQUIRED.
- 4 x M16mm mounting screws
- 1 x Hex Key installation tool
Table of Contents
- What’s in the box
- Nomenclature
- Initial setup
- Using the Pro Mount underwater
- Safety information
- Maintenance and repair
- Limit of liability
- Warranty
- Servicing
- Returns
- Legals
Nomenclature
Initial Setup
- Remove Pro Mount from bag
- Line up Pro Mount holes on Top Landing Mount
- Make sure slot is facing towards you.
- Install Pro Mount mount by screwing in the four Pro Mount screws securely, using provided Hex key
Using the Pro Mount underwater
For best results please make sure you have carefully followed all initial setup instructions prior to taking your Pro Mount underwater.
Safety information and warning
- Do not exceed depths of 10m/33ft.
- Do not leave your Water Housing gear in temperatures greater than 50 C (125 F)
Maintenance and repair
With proper care your gear will last for many years.
If in time you do notice any problems that come up or if there is any damage
to the equipment please contact AQUA TECH directly at
service@aquatech.net for repairs or servicing.
Limit of liability
In the event of a product warranty claim, AQUA TECH is only liable up to the
value originally paid for the product.
Losses of associated equipment, income or any other financial costs are not
covered under this warranty, under any circumstances.
Warranty – 1 year product warranty
We make every effort to ensure that our products are made from the highest quality materials and workmanship. Should you not be completely satisfied with one of our products, we encourage you to contact us so that we can promptly resolve any problem you may be experiencing. Our company representatives will deal with your issue quickly and decisively
As many AQUA TECH products are often used in extreme and volatile environments, we are unable to cover for loss or damage of equipment, personal injury or financial loss.
To reduce the risk of these losses occurring, we strongly recommend you read the relevant product instructions carefully and test the product before use
What does the warranty cover?
This warranty covers any defects in materials or workmanship, with exceptions stated below
What is not covered?
The warranty does not cover damage as the result of normal wear and tear.
Determination of what constitutes normal wear and tear will be at the
discretion of AQUA TECH service centers. The warranty guarantee only applies
to the original purchaser of the product when purchased from AQUA TECH direct
or through one of our authorized dealers. Therefore, we may ask for proof of
purchase.
This warranty does not cover for any loss of associated equipment such as
cameras, lenses or other associated equipment not sold by AQUA TECH.
Loss of income, reputation or other financial expenses, such as personal injury are also not covered by this warranty. Shipping costs for returned products are the responsibility of the customer.
How long does the coverage last?
This warranty runs for 1 year from the date your product is received.
What will AQUATECH do?
AQUATECH will repair any defect that proves defective in materials and workmanship. If repairing is not possible, AQUATECH will replace the product, or, offer a store credit for the original purchase price, whichever is agreed to by the customer and AQUATECH / Retailer store.
How to get service?
Email contact@aquatech.net and we will advise where to send your product. Alternatively, you may call:
USA: + 1 714 968 6946 Australia: + 61 2 4268 3550
Returns policy – AQUATECH online customers only:
AQUATECH offers a 14 day return policy for new items purchased directly through our online store or at our physical store. AQUATECH will only provide exchanges or store credit for change of mind or incorrectly ordered products. AQUATECH will not refund any shipping and credit card costs. Please see our full return policy here. The customer is responsible for shipping cost of the returned items. A restocking charge may be applied in some countries.
How state law applies:
This warranty gives you specific legal rights, and you may have other rights which vary according to the state or country in which you are located.
Legals
Please practice extreme caution when diving into deep water. Only use this
product in settings that are within yours or other’s capabilities. Serious
injuries or drowning could occur if you or others are not competent for the
prevailing conditions.
AQUATECH (NSW) Pty. Ltd., incorporated in Australia. Australian Business
Number: 84 062 580 796
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>