KLARSTEIN 10035408 Combi Grill User Manual

KLARSTEIN 10035408 Combi Grill

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

Chal-Tec GmbH, Wallstr. 16, 10179 Berlin, Germany WWW.KLARSTEIN.CO.UK

Produktname: Kingsville Kombi Grill

Artikelnummer: 10035408

Pin-Code: 2531CS-0077

Chal-Tec GmbH, Wallstr. 16, 10179 Berlin, Deutschland WWW.KLARSTEIN.DE

Bestimmungs- land| Geräteklasse| Gasart und Gasdruck| Hauptbrenner| Seitenbrenner| Gesamt- wärme- leistung (Hs)
Injektorgröße Ø| Injektorgröße Ø
LU, NL, DK,

FI, SE, CY,

CZ, EE, LT,

MT, SK, SI,

BG, IS, NO,

TR, HR, RO,

IT, HU, LV

| I3B/P(30)| Propan, Butan und Mischungen: 28~30 mbar| 0,80 mm| 0,76 mm| 8,1 kW

(589 g/h)

BE, FR, IT,

LU, IE, GB,

GR, PT, ES,

CY, CZ, LT, SK, CH, SI, LV

| I3+(28~30/37)| Butan/Propan: 28~30/37 mbar| 0,80 mm| 0,76 mm
PL| I3B/P(37)| Propan, Butan und Mischungen: 37 mbar| 0,80 mm| 0,76 mm
AT, DE, SK, CH, LU| I3B/P(50)| Propan, Butan und Mischungen: 50 mbar| 0,70 mm| 0,66 mm
•      WARNUNG: Zugängliche Teile können sehr heiß sein.

Halten Sie kleine Kinder fern.

•      Lesen Sie die Anweisungen, bevor Sie das Gerät benutzen.

•      Verwenden Sie das Gerät nur im Freien.

•      Stellen Sie die Gasflasche nicht ins Innere des Gasgrills.

|   2531-20

SAFETY INSTRUCTIONS

•  Read the operating instructions carefully before using the appliance.
•  Keep this manual for future reference.
•  The grill is suitable for outdoor use only. Do not operate the grill inside buildings, garages or other enclosed areas.
•  Children must not use the appliance! Persons with reduced physical, sensory or mental capabilities or those with a lack of experience and knowledge may only use the appliance if they are instructed on how to do so by a person responsible for their safety, or if they are supervised and understand the hazards associated with the use of the appliance.

WARNING
Risk of burns! Accessible parts of the appliance get very hot during and after use. Use oven gloves to protect against burns, and keep young children and pets away from the grill.

•  This appliance must be kept away from fl ammable materials during use.
•  Do not move the appliance during use.
• Turn off the gas supply at the gas cylinder after use.
•  Do not modify the appliance.
•  Don’t place the gas cylinder under or near the appliance.
•  The gas cylinder must be stored in accordance with the regulations in force.
•  Only use propane and butane gas specifi ed in the instruction manual.
•  Do not use fl ammable liquids to light or relight your gas grill.
•  Follow the assembly instructions in this manual. Do not modify the assembly, or change any component parts. Failure to comply with these instructions may cause risk during use.
•  In the event of a gas leak, immediately shut off the gas supply at the cylinder, extinguish any open fl ame and open the lid. Check the hoses for damage and /or poor connection. If the leak continues, immediately contract as approved gas dealer. Do not use a naked fl ame to check for gas leaks.
•  Always perform a leak test before switching on the appliance as described in this manual. Check the hose, regulator, valve and all other gas lines for holes. Never use the appliance if you fi nd a gas leak.
•  If rain, snow, hail, sleet or other forms of rain fall into the grill while cooking with oil or fat, immediately cover the cooking bowl and turn off the burner and gas supply. Do not try to move the appliance or the cooking container.
•  Do not attempt to disconnect any gas fi ttings or connectors when the appliance is being used.
•  When grilling, the appliance must be placed on a fl at, stable, non-combustible surface and at a safe distance from fl ammable materials.
•  Never leave your grill unattended when in use. Always cook with great care.
•  This appliance should never be used as a heater.
•  This appliance should be cleaned on a regular basis. During cleaning, take care not to damage any component parts, such as the burner or valves.
•  Check the flexible hoses at least once per month, and each time you change the gas cylinder. If you find signs of cracking or deterioration, replace with a new hose of similar length and quality.
•  When changing your gas cylinder ensures that there are no sources of ignition close by i.e. fires, cigarettes, naked flames etc. Make sure that the appliance is switched off.
• We recommend that this appliance is serviced by an approved technician at least once per year. Do not attempt to service this appliance yourself.
•  During the operation, the appliance shall be placed in a ventilation area.
•  Flexible tube shall be changed every 2 years. It is necessary to change the flexible tube when the national conditions require it. The flexible tube should comply with relevant standard and local code.
•  The appliance or the appliance components must not be changed by the user. The user shall not manipulate any parts that are sealed by manufacturer or his agent. Never attempt to repair the appliance yourself.
• Modifications of the applianceor the appliance components can lead to property damage or personal injury or death. Repairs should only be carried out by qualified personnel.
•  Before each use of the appliance, check whether there are insects or insect nests in the burner, in the pipes and in the appliance openings, and remove them if they are present. Spiders and small insects can nest in the pipes and appliance openings when the appliance is not in use. This may block the flow of air and gas, causing a yellow flame recoil and a fire below the burner. To prevent this, remove insects and insect nests, if present, before each use.

Gas Requirements

Note: The appliance must be equipped with an EN 16129 approved gas regulator and EN 16436-1 approved gas hose with a minimum length of one metre. If not included in the delivery, they must be purchased additionally.

•  For details on the more exact use of your gas bottles, contact your local gas bottle dealer.
•  Never use a gas bottle with a damaged container, valve, base or ring.
•  A deformed or rusty gas bottle can be dangerous and should be checked for functionality by your local gas bottle dealer before use.
•  Never connect the appliance to an uncontrollable gas source. Turn off the gas when the appliance is not in use.
•  The appliance may only be operated with propane gas or butane gas or a gas mixture of both types of gas. The gas bottle must not fall down or be handled roughly. The connection to the gas bottle must be disconnected when the grill is not in use. After disconnecting, replace the cap on the gas bottle.
•  Before connecting the gas bottle to the grill, make sure the gas tap is turned off, there are no open flames near the appliance, and the gasket is in good condition. Then connect the pressure regulator to the gas bottle.
•  The connection hose must be replaced every two years.
•  Check the connection hose once a month and every time the gas bottle is changed. If the connection hose shows cracks or other signs of deterioration, it should be replaced with a new one.
•  Be careful not to kink or twist the connection hose and ensure that it does not touch the hot surface of the equipment.
•  Before replacing the gas bottle, make sure that the gas has been shut off and there are no open flames or other sources of heat near the appliance. Make sure that the gas bottle is permanently in an upright position.
•  Only use the connections and accessories of the appliance for their intended uses.
• Do not turn the gas bottle upside down to use the remaining gas.
•  If local regulations require it, the flexible hose must be replaced.

Leak test

•  Perform a leak test each time the gas bottle is connected or reconnected.
•  Never use an open flame to check if gas is leaking.
•  Do not smoke while performing the leak test.
•  Always carry out the leak test outdoors in a well-ventilated area away from ignition sources such as gasoline, open flames, sparks, or electrical equipment.
•  The appliance must be checked regularly for gas leaks. If a smell of gas is perceptible, the leak test must be carried out immediately.

Carrying out the leak test

•  Make a soap and water solution in a ratio of 1: 3. The soap solution can be applied to the areas to be tested with a bottle, brush, dishwashing bottle or cloth: gas bottle valve, gas regulator, all gas connections, hose connections and along the entire length of the connection hose.
•  The gas valve should be turned to the “OFF” position when applying the soap solution. Once the soap solution has been applied everywhere, the gas valve should be turned to the “ON” position.
•  If there is a leak at one point, bubbles will appear at the appropriate place.
•  If there is a leak, immediately turn on the gas valve. Tighten the leaking fittings, open the gas valve and check all locations again.
•  If the leak does not close after several attempts, contact your local gas dealer or similarly qualified person. Never use the grill as long as there is a leak.

Instructions for Charcoal Compartment

WARNING
Risk of burns! This grill will become very hot, do not move it during operation.

•  The grill has to be installed on a secure level base prior to use.
•  The grill shall be heated up and the fuel kept red hot for at least 30 minutes prior to the fi rst cooking.
•  Do not cook before the fuel has a coating of ash.
•  Do not use the grill indoors!
•  Keep children and pets away.

WARNING
Fire and explosion hazard! Do not use spirit or petrol for lighting or re- lighting! Use only fi relighters complying to EN 1860-3!

• The maximum amount of fuel is 1.5 kg.

SCOPE OF DELIVERY

ASSEMBLY

Make sure your grill is assembled properly. Detailed assembly instructions are packed with each grill giving specifi c assembly procedures for each model. Follow these instructions carefully to ensure the correct and safe assembly of the grill.

CAUTION
Risk of injury! Although we take every effort to ensure that the assembly process is as easy as possible, it is inherent with fabricated steel parts that corners and edged can cause cuts if improperly handled during assembly procedures. Be careful while handling any parts during assembly. It is strongly recommended that you protect hands with a pair of work gloves.

INSTALLATION

Preparation

•  You will need gas cylinder and proper regulators under the gas pressure to operate this gas grill. The regulators should be comply with EN 16129 with current version and national regulation.
•  Connect the hose and regulator to the gas cylinder at the left side of the gas grill. Keep in mind that the gas cylinder must be kept away from heat and in a safe position.The hose should have a diameter of 8-10 mm. The recommended length of the hose must not exceed 1.5 m. The flexible hose should comply with the relevant standard and local regulations.

Installation
After purchasing your gas cylinder you will then be ready to set it up with your gas grill.

•  Check all the parts, and make sure no part is missing. If there are any parts missing, please contact customer service.
•  For assembly you will need a suitable screwdriver and spanner. Only use tools that are intact and suitable for the job at hand.
•  Select a suitable place to set up the appliance. The appliance is positioned firmly on a flat, sufficiently large surface area. Make sure the inlet and the outlet regulator are correct and suitable for the cylinder valve and appliance.
•  If the regulator is used outdoors, make sure that it is protected from atmospheric agents.
•  For connecting the gas cylinder, you will need a suitable spanner.
•  When connecting the flexible tube, make sure it is not twisted.

How to connect and change a Gas Cylinder

•  When changing the gas cylinder which shall be carried out away from any source of ignition. Position the gas cylinder at left side of your gas grill, should not be placed inside the grill, keeping in mind that the gas cylinder must be kept away from heat and in a safe position.
•  When ready to use your gas grill insert the regulator into the gas cylinder valve and tighten firmly.

WARNING
Risk of injury and material damage! Before attempting to light your gas grill, follow all instructions, warnings and safety precautions described in this manual.

•  Check the hose before each use, searching for cracking, cuts or any abrasions. If the hose is found to be faulty in any way do not attempt to use your gas grill.
•  When changing your gas cylinder ensures that there are no sources of ignition close by i.e. fi res, cigarettes, naked fl ames etc. Make sure that the appliance is switched off.
•  The appliance only can use liquid gas cylinder as per Technical Data Label. The gas cylinder should meet the national requirement.

OPERATION

Notes on Operation

•  Always test gas line for leaks at connector with soapy water after making connections.
•  The top lid must always be open when lighting the burner.
•  Use oven gloves and sturdy long handled gas grill tools when cooking on the grill.
•  Be prepared if an accident or fi re should occur. Know where the fi rst aid kit and fi re extinguishers are and know how to use them.
•  Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.
•  Always cook with great care.
•  Do not heat any unopened glass or metal container of food on the grill. Pressure may build up and cause the container to burst, possibly resulting in serious personal injury or damage to the grill.
•  It is recommended to use protective gloves when operating the appliance, especially handling particularly hot components.

Lighting the Grill

CAUTION
Risk of fi re and burns! The lid must be open when lighting the burner! Do not stand with your face directly over the gas grill when lighting it.

1.  Open the lid of the grill.
2.  Set all control knobs to “OFF” position.
3.  Open the gas bottle valve according to operating instruction.
4.  Push in and turn burner control knob anti-clockwise to “HIGH” position. Then, press “IGNITOR” button rapidly several times to light HIGH the burner.
5. If the burner does not light, turn all control knobs to “OFF” position. Then, repeat the lighting procedure after 5 minutes.
6.  Turn off appliance control knobs and gas bottle valve after using the appliance.

Tips for energy-saving use

•  Reduce the opening time of the lid.
•  Turn the grill off as soon as cooking is completed.
•  Preheat the gas grill for 10 to 15 minutes only (except for the fi rst use).
•  Do not preheat longer then recommended.
•  Do not use a higher setting than required.

STORAGE

Storage of the gas cylinder

• Your gas cylinder must be stored outdoors in a well ventilated area and must be disconnected from your gas grill when not in use. Ensure that you are outdoors and away from any sources of ignition before attempting to disconnect your gas cylinder from your gas grill.

Storage of the gas grill

• When you are using your gas grill after a period of storage, ensure to check for gas leaks before using.
•  Also check for any obstructions in the burner etc. before using. Always follow the cleaning instructions to ensure gas grill is safe.
•  If gas grill is stored outdoors ensure to check that all areas under the front panel are free from any obstructions (dirt, insects etc.) as this may affect the fl ow of gas.
•  Store your grill in a cool dry place. It may be necessary to dry the grill and the inside of the cover if used.
•  Chrome plated warming racks etc. should be coated with cooking oil. Wrap the burners in aluminium foil to help prevent insects or other debris from obstructing the burners.

CLEANING AND MAINTENANCE

CAUTION
Risk of burns! All cleaning and maintenance work may only be carried out when the gas grill has cooled down and the connection to the gas cylinder has been disconnected.

Maintenance

• It is recommended to have the gas grill serviced by a competent technician every 90 days, but at least once a year. Do not attempt to service the appliance yourself.

Cleaning

•  Let the grill “burn down” after each use to reduce food residues on the grill grid to a minimum. To do this, turn the burner on for 15 to 20 minutes. Grease drippings will be burned off from your grill. Make sure that the appliance has cooled down before you continue with the cleaning.
•  Grids should be cleaned periodically by soaking and washing in soapy water.
•  The interior surfaces of the grill housing cover should also be washed with hot, soapy water. Use a wire brush, steel wool or a scouring pad to remove stubborn spots.
•  Periodically check the burner to see that it is free from insects and spiders which may clog the gas system, defl ecting gas fl ow. Ensure to clean venturi pipes on burner very carefully, make sure that there are no obstructions. We recommend that you use a pipe cleaner to clean the venturi pipe area.
•  Any modifi cations of this appliance may be dangerous and are not permitted.

TROUBLESHOOTING

greater than 5/32 inch

– 3/16 inch.

| Loosen the ignition pin and adjust the distance, then fasten it again.
The electrode tip does not produce sparks at the burner port.| Reinstall the electrode.
No gas supplied.| Turn on the regulator valve.
Burner blows out.| Gas cylinder is empty.| Change the gas cylinder.
Gas supply is not

sufficient.

| Check the gas supply hose and make sure there are no leaks and no knots.
Low heat with the knob in

“HIGH” position.

| Gas cylinder is empty.| Change the gas cylinder.
Low heat

(caused by the gas pipe system)

| The LPG regulator assembly incorporates an excess flow device designed to supply the grill with sufficient gas flow.

Rapid changes in pressure can trigger the excess flow device, providing

a low flame and low

temperature.

| Follow these instructions:

•      Make sure all burners

are “OFF”.

•      Open the tank valve

and wait 5 minutes.

•      Light the burner one at a time following the lighting instructions listed on the door liner.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electricaland electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

References

• Klarstein | Discover the Online Shop for Home & Living
• Klarstein | Your home. Your kitchen. Your style.
• Klarstein | Der Online Shop für Haushaltsgeräte und Home & Living

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>