Tkmd TK22 Smart Watch Instruction Manual

Tkmd TK22 Smart Watch

Watch quick instructions

Parts introduction

Long press the side button to turn on the watch

Instruction for Charging

Before using the watch for the first time, needs to be charged and activated. Use the equipped magnetic charging cable to attach to the metal point on the back of the watch, and connect the other end of the charging cable to a USB charging head or a computer USB interface.

Install watch APP

Scan the following QR code or go to major application markets to download and install “DeepFit’  Device requirements: iOS 9.0 and above;Android 4.4 and above, support Bluetooth 4.0

Connect the watch
The watch has a dual Bluetooth function two Bluetooth connections have different functions. as follows

1. APP-end connection (For APP data transfer)
   Open the APP and click Adding a new device’ to find the watch you need to connect to, Perform connection pairing.

2. Mobile phone connection (for calls)
   After the watch is successfully connected to the APP, turn on the watch audio Bluetooth switch in the watch settings page, and then click Audio_—-” in the Bluetooth search of the cell phone to use all the information permissions such as the need to read contact information and the cell phone settings to give the APP background operation. Bluetooth pairing connection, after the connection OK watch can make audio calls with the phone. When your watch is connected to your phone, you can use your watch to dial-control your phone to make calls, or you can answer calls from your phone on your watch.

When using the call function, you need to make sure that your watch is connected to your phone in stable state.

Main function interface

Pedometer/Distance/Calories
View steps, distance, calories burn in real time It can synchronize apos in time to view motion data.

Body temperature
Switch to the temperature test interface to enter the real-time temperature detection, the monitoring data can be updated to the APP synchronously, and there is a test report.
Note: When testing body temperature, the bottom temperature must be in full contact with the skin (tested after 10 minutes of wearing). The body temperature test will be affected by the temperature difference of the environment, which only serves as a warning reminder. For details, please refer to medical professional equipment and doctor diagnosis
Heart rate monitoring
Switch to the heart rate monitor interface, Heart rate monitoring, in real- time The measurement data can be synchronized with the APP in real-time with a test report.

ECG
Long press the front electrode on the ECG test interface, the three electrodes are in full contact Skin, test, and test report needs to be viewed in the APP

Blood pressure monitoring
Switch to the blood pressure monitor interface, to enter real-time monitoring. The measurement data can be synchronized with the APP in real time with a test report.
Note : When measuring blood pressure, please measure by the correct posture. The test result is for reference only. Cannot be used as medical data

Blood oxygen interface
Switch to the blood oxygen test interface to enter the blood oxygen real-time detection and measurement data it can be updated to the APP synchronously, and there is a test report.

Blood sugar
Switch the watch to the blood sugar test interface to enter blood sugar monitoring, and the data can be updated to the APP synchronously.
Note: The test results are for reference only and cannot be used as medical data. Sleep monitoring function
When you fall asleep, your watch automatically determines that you’re in sleep detection mode, automatically detects how long you’ve been asleep/light sleeping/sleeping all night, calculates the quality of your sleep, and updates your sleep data to the APP synchronously.
Note: Wear vour watch to sleep before vou have sleep dat:

Music
When connected, tap music to control the music player. Shortcut function
Swipe down on the main interface to enter the shortcut function interface, select’ Do not disturb” “Lock Screen About “Settings” and other options, and click the icon to You can enter the corresponding function.
Information
Click on the message to view the content of the message, scroll up and down to turn pages. Swipe right to exit. Brightness
Click the brightness icon to freely select the screen brightness

Reset
Click the reset icon to enter, you can restore the factory settings of the watch.
Shutdown
Click the shutdown icon to enter, you can shutdown.
Basic parameters

• Connection mode: Bluetooth connection
• Input: 5V,500mA MAX
• Device requirements: Android 4.4or iOS 9.0 and above

Caution

1. Prohibit the use of an adapter with a charging voltage greater than 5V, a charging current greater than 2A, and a charging time of 2-3 hours.
2. Prohibit charging in the presence of water damage.
3. Do not disassemble the case of this product without permission, the product will be damaged and lose warranty eligibility.

Special note

1. This product is not a medical device, the measurement results are for reference only, not for any medical purposes and basis. Please follow your doctor’s instructions and do not rely on the test results for self-diagnosis and treatment.
2. This manual is based on existing information, in the spirit of continuous improvement, and the principle of continuous development, the company reserves the right to change product specifications and functions, and any product described in this manual to modify and improve

FCC

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. Thanksgiving, I met you in the years like songs. Thank you for choosing this smart watch. This watch will provide higher help and enjoyment for your exercise and health. For your convenience, please read the instructions carefully and follow the steps in the instructions.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>