ikan PT4200 Professional 12 Inch Beam Splitter Teleprompter with Reversing Monitor User Guide
- June 5, 2024
- ikan
Table of Contents
PT4200 Professional 12 Inch Beam Splitter Teleprompter with Reversing
Monitor
User Guide
What’s Included
- 1 x Teleprompter Base
- 1 x Bracket with Glass
- 1 x Magnetic Teleprompter Hood with Boot
- 1 x Monitor
- 1 x Dual Sided Riser
- 1 x AC Adapter with Cord
- 1 x PrompterPro Software
- 2 x 15mm Rod Monitor Adapters
- 2 x Hex Keys
- 4 x Screws
Setup
Step 1
Attach the two 15mm rod monitor adapters to the back of the monitor’s VESA
mounts with the 4 screws using the smaller hex key.
Step 2
Using the larger hex key loosen the rod clamps.
Step 3
On the teleprompter, the base loosens the top 4 screws holding the rods in
place.
Step 4
After loosening the following two screws on the base pull the rods out to
accommodate the monitor.
Tighten all 6 screws after the rods are extended.
Step 5
After tightening the rods, slide the monitor into the teleprompter base. Leave
slight room for the teleprompter bracket and glass to slide in.
Step 6
Pull the red knob to insert the teleprompter bracket with glass into the
teleprompter base.
Step 7
Tighten the silver knob to hold the teleprompter bracket in place.
Step 8
Slide the monitor completely in and tighten the four screws to lock the
monitor in place.
Step 9
Attach the magnetic teleprompter hood with the boot.
Step 10
Slide the dual-sided riser into the directional channel of the teleprompter
base. Larger or taller cameras should insert the lower side facing glass,
while smaller cameras should insert with the higher side.
Monitor Ports
BNC – AV Composite Input
VGA – Video Graphics Array DE15 Connection
HDMI – High-Definition Multimedia Interface Input Connection Power Port –
12-24v Input
HDMI – Switch HDMI input
VGA – Switch to VGA input
AV – Switch to the composite BNC input
Flip – Toggle image flip (Can be set to horizontal, vertical, or both via
menu)
Up Arrow – Toggle up to adjust the setting
Menu – Access to monitor settings
Down Arrow – Toggle down to adjust the setting
Monitor Menu Settings
Video Config
Contrast (White Level)
Brightness (Black Level)
Tint (Chroma Hue)
Chroma (Chroma Saturation)
Sharpness (Detail)
RGB Setup – Manually configure RGB
Return
System Config
Menu Duration – Set the duration of how long the menu stays on screen
Video Ratio – Set screen aspect ratio 16:9 or 4:3 (4:3 is
the native resolution, 16:9 will create black bars)
Flip-H – Assign toggle button to flip the image horizontally
Flip-V – Assign toggle button to flip the image vertically
Reset – Factory reset
Return
PC Setup (Only available for VGA)
H-Position – Adjust the horizontal position
V-Position – Adjust the vertical position
Auto–Monitor automatically adjust the position
Return
Exit
Specifications
| Aspect Ratio | 4:03 |
|---|---|
| Brightness | 350 cd/m2 |
| Build Material | Aluminum / Steel |
| Contrast Ratio | 500:01:00 |
| Input Signal | Composite BNC, VGA, HDMI |
| Reading Range | 13 ft. |
| Resolution | 1024 x 768 |
| Screen Size | 12 in. |
| Viewing Angle | 160 degrees (horizontal/vertical) |
Features
- Includes a 12” monitor that supports image flip (vertical and horizontal)
- High-quality American made 70/30 beam splitter glass
- Screen readable from up to 13’
- Works with many different sized cameras
- Easy balancing with adjustable base
- Perfect size for portability and view-ability
- Ships in Reusable Foam for Easy Transport
- Includes MAC and PC Software
- HDMI, VGA, and Composite BNC
Learn More
More dynamic information at official website: www.ikancorp.com
Support
Contact email: support@ikancorp.com
CONDITIONS OF WARRANTY SERVICE
- Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
- The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be provided in the Following Situations: (Even if the product is still within the warranty period.)
- Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
- Damage caused by natural disasters, abnormal voltage, environmental factors, etc.
©2020 Ikan International. All rights reserved.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>