FSP CUT593P Ultra Tower User Manual

June 17, 2024
FSP

FSP CUT593P Ultra Tower

Specification

FSP-CUT593P-Ultra-Tower-fig- \(1\)

Accessory

FSP-CUT593P-Ultra-Tower-fig- \(2\)

Fan & Radiator Support

FSP-CUT593P-Ultra-Tower-fig- \(2\)

  1. Front Panel
  2. Bottom Plate
  3. Side Cover
  4. HDD/SSD Tray
  5. Top Cover

Side Panel Disassembly

FSP-CUT593P-Ultra-Tower-fig- \(4\)

  • Glass Remov al: Pull the glass open, then lift it upward to take it off.
  • Front Panel Replacement: To remove, pull it out diagonally from the top. When installing, support the top and gently push it in.

Cable Management Plate Installation

FSP-CUT593P-Ultra-Tower-fig- \(5\)

Above the cable management plate, the power extension cable is already installed, and at both ends, it is connected to the motherboard and the power cables.

Power Supply Unit(PSU) Installation

Place the power supply on the side, and tighten it using screw (1).

HDD Installation
Turn the screw to open the hand and remove the hard drive bay. You can install 2 HDDs or 1 HDD and 1 SSD. On top of the power cover, you can install either an HDD or an SSD.

FSP-CUT593P-Ultra-Tower-fig- \(7\)

2.5” SSD Installation
You can install two at the back of the motherboard, two on the side, and one SSD inside the hard drive tray.

FSP-CUT593P-Ultra-Tower-fig- \(8\)

PSU Dust Filter
The dust filter for the power supply can be removed from the rear, and please take care to note the top and bottom orientation.

FSP-CUT593P-Ultra-Tower-fig- \(9\)

Warranty Policy

Thank you for purchasing FSP product! FSP warrants that the product will be free of defects in material and workmanship, and provides the warranty period- identified on the product package from the power supply on the date of purchase. In the event that warranty policy might be different in certain regions; please contact local authorized FSP reseller where the product is purchased.

The warranty is applied to damages caused through normal use and is void if it is resulted from, but not limited to, the following situations:

  • Wear and tear associated with normal use
  • Any modification, abuse, accident, disassembly, misapplication, or unauthorized repair
  • Removal of any manufacturer label(s) or sticker(s)
  • Any improper operation, including any use not in accordance with any supplied product instructions
  • Any other cause which does not relate to a product defect in materials or workmanship

Warranty Card
Global Branch Office .Thank you for purchasing FSP products! FSP Technology Inc., the world’s most respected designer and manufacturer of switching power supply unit(PSU) and mobile power solutions.

Global Branch Office
FSP TECHNOLOGY INC. (Headquarters)
TEL: +886-3-357-7359 / FAX: +886-3-357-7597
E-mail: sales@fsp-group.com.tw
FSP GROUP USA CORP.
14284 Albers Way, Chino, CA 91710, U.S.A.
TEL: +1-909-606-0960 / FAX: +1-909-606-0014
E-mail: info@fspgroupusa.com

WEEE

ATTENTION!!!
The product contains hazardous waste and/or recycling goods. According to the law it is not allowed to be disposed of in the household waste. For more detailed information please contact the applicable collection point for hazardous waste or recycling goods.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals