Recyko M451 Speed Charger (USB) 4-slot NiMH Instruction Manual

: June 5, 2024
: ReCyko

Table of Contents

Recyko M451 Speed Charger (USB) 4-slot NiMH
Unpacking and checking
Charging instructions
LED indication
Charging time
Features
Charging instructions
Usage tips
Safety information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Recyko M451 Speed Charger (USB) 4-slot NiMH

Unpacking and checking

You should find the following items in the packaging*. Please make sure they are undamaged and in good working order.

$Recyko-M451-Speed-Charger-$USB$-4-slot-NiMH-1$

For exact product contents, please refer to “In the box” section of the packaging.

Charging instructions

$Recyko-M451-Speed-Charger-$USB$-4-slot-NiMH-2$

LED indication

Condition	LED indicator
Charging in progress	Green (Flashing)
Bad or single-use batteries	Red (Rapid flashing)
Charging completed	Green

Charging time

Recyko batteries (1 – 4pcs)	Size	Capacity	Charging time
AA	1300 – 2600 mAh	1.3 – 5.2 hrs
AAA	650 – 950 mAh	2 – 3 hrs

Charging time is subjected to the power rating of the USB adapter with these output levels:

Features

Individual charging of 1–4 pcs of AA / AAA batteries with 4 LED indicators
Auto power cut-off : Negative delta V, safety timer & temperature cut-off protections
USB power input (5V / 1A)
Approx. charging time for AA 2100 mAh / AAA 850 mAh batteries: 2–4 hours
Trickle charge mode
Dual charging via (i) direct USB charging connection or (ii) Recyko 4-slot or 8-slot charger docks

Charging instructions

Read the instruction manual thoroughly before use. Keep the manual for future reference.

Insert 1–4 pcs NiMH batteries into the battery charger according to the battery polarity (Fig. 1).
Connect the micro USB end of the cable to the micro USB port of the battery charger (Fig. 2a).
Connect the other end of the USB cable to a smartphone wall charger (Fig. 2b) or similar USB port on a power bank or USB car charger. Charging will commence and the LED indicators will show the status of the batteries (Fig. 3). The LED indicators will ﬂash green when the batteries are charging.
For bad or single-use batteries, the LED indicators will ﬂash red rapidly.
Once the batteries are fully charged (LED constant green), remove the batteries and disconnect the battery charger from the power supply.
For charging via charging dock, please refer to the instruction manual of corresponding Recyko charger dock.

Usage tips

It is normal for batteries to become hot during charging and they will gradually cool down to room temperature after fully charged.
Remove batteries from the electrical device if the device is not going to be used for a long time.
Battery storage temperature: -20 ~ +35°C
Charging operation temperature: 0 ~ +33°C

Safety information

This charger is designed to charge only NiMH batteries. Charging other batteries may lead to explosion, battery rupture or leakage, personal injury or property damage.
This charger is designed for indoor use only. Do not expose the charger to rain, snow or direct sunlight.
Do not use the charger in humid conditions.
Make sure the charger is used between 0 ~ +33°C.
Do not use non-rechargeable, LiFePO4, NiCD or Li-ion batteries.
Do not use the charger if it has a damaged plug.
Do not use the charger after it has been dropped or damaged. Do not open/disassemble the charger.
This charger is maintenance-free but should be wiped clean regularly with a dry and soft cloth.
Do not use abrasives or solvents. Unplug the charger before cleaning. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.