DYBERG LARSEN 2001101C Wall Lamp Instruction Manual
- June 3, 2024
- DYBERG LARSEN
Table of Contents
DYBERG LARSEN 2001101C Wall Lamp
Material: Metal, plastic
Max: 40W E27
IMPORTANT
- This lamp must be installed by an authorized electrician.
- Warning: Always remember to turn off the voltage before working on the electrical installation.
- The lamp might get warm under use.
- To avoid injury on the lamp, please don’t use alkalic detergent. Use a soft cloth and gentle detergent. Always turn the lamp off when cleaning it.
- Omission of cleaning the lamp can have a negative effect on the life time. And possible can lead to a dangerous situation.
Changing the bulb
- Turn off the power at the head fuse.
- Disassemble the lower part of the lamp (please see drawing).
- Gently pull the bulb out of the socket.
- Change the bulb (Please only use the recommended type).
- Assemble the lower part again.
- Turn on the power.
230V~50Hz
Contains: Complete lamp (excl. bulb)
IP44 only for outdoor use
| |
---|---|---
Electrical and electronic equipment (EEE) contains materials, components and
substances that can be hazardous and harmful to human health and the
environment when waste of electrical and electronic equipment ( WEEE ) is not
disposed of properly. Products marked with ” the crossed-out rubbish bin ”
shown below are electrical and electronic equipment. The crossed-out rubbish
bin symbolizes that the waste of electrical and electronic equipment may not
be disposed of with unsorted household waste but must be collected separately.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>