DYBERG LARSEN 8204 DL20 Opal Table Lamp Instruction Manual
- June 3, 2024
- DYBERG LARSEN
Table of Contents
8204 DL20 Opal Table Lamp
Instruction Manual
Produced in
www.dyberglarsen.com
TABLE LAMP
Material: Metal, glass
Max: 5W G9 LED
Max H: 55mm
IMPORTANT:
-
Warning: Always remember to turn off the voltage before working on the electrical installation.
-
The lamp might get warm under use.
-
To avoid injury on the lamp, please don’t use alkalic detergent.
Use a soft cloth and gentle detergent. Always turn the lamp off when cleaning it. -
Omission of cleaning the lamp can have a negative effect on the lifetime and can lead to a dangerous situation.
-
Be careful not to tighten the top screws too much, because the glass might break.
Because the glass is mouth blown, there may be differences in the glass thickness and thereby give height difference and unevenness.
Changing the bulb:
-
Turn off the power at the head fuse.
-
Disassemble the upper parts of the lamp (please see drawing).
Gently pull the bulb out of the socket. -
Change the bulb (Please only use the recommended type).
-
Assemble the upper part.
-
Turn on the power.
230V~50Hz
Contains: Complete lamp (excl. bulb)
IP20, only for indoor use
Electrical and electronic equipment (EEE) contains materials, components and
substances that can be hazardous and harmful to human health and the
environment when waste of electrical and electronic equipment ( WEEE ) is not
disposed of properly.
Products marked with ” the crossed-out rubbish bin ” shown below are
electrical and electronic equipment. The crossed-out rubbish bin symbolizes
that the waste of electrical and electronic equipment may not be disposed of
with unsorted household waste but must be collected separately.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>