DYBERG LARSEN Futura Wall Lamp Black Instruction Manual
- June 10, 2024
- DYBERG LARSEN
Table of Contents
DYBERG LARSEN Futura Wall Lamp Black
PARTS
A|
---|---
B|
IKKE inkluderet
C|
INSTALLATION
Material: Metal
Max: 40W E14
IMPORTANT:
- Warning: Always remember to turn off the voltage before working on the electrical installation.
- The lamp might get warm under use.
- To avoid injury on the lamp, please don’t use alkalic detergent. Use a soft cloth and gentle detergent. Always turn the lamp off when cleaning it.
- Omission of cleaning the lamp can have a negative effect on the lifetime. And possible can lead to a dangerous situation.
- Be careful not to tighten the top screws too much, because the glass might break.
Changing the bulb:
- Turn off the power at the head fuse.
- Screw the defect bulb loose.
- Change the bulb (Please only use the recommended type).
- Turn on the power.
230V~50Hz
Contains: Complete lamp. (excl. bulb)
IP20 only for indoor use.
| |
---|---|---
Electrical and electronic equipment (EEE) contains materials, components and
substances that can be hazardous and harmful to human health and the
environment when waste of electrical and electronic equipment ( WEEE ) is not
disposed of properly.
Products marked with ” the crossed-out rubbish bin ” shown below are
electrical and electronic equipment. The crossed-out rubbish bin symbolizes
that the waste of electrical and electronic equipment may not be disposed of
with unsorted household waste but must be collected separately.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>