KLARSTEIN 10031850 Sweet Dreams Ice Cream Maker Instruction Manual
- June 5, 2024
- Klarstein
Table of Contents
KLARSTEIN 10031850 Sweet Dreams Ice Cream Maker
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10031850 |
---|---|
Power supply | 220-240 V ~ 50-60 Hz |
Capacity | 1.5 L |
Power consumtion | 150 W |
SAFETY INSTRUCTIONS
- Read all the safety and operating instructions carefully and retain them for future reference.
- Ensure the voltage is compliant with the voltage range stated on the rating label, and ensure the earthing of the socket is in good condition.
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
- Do not upend this product or incline it over a 45° angle.
- To protect against risk of electric shock, do not pour water on cord, plug and ventilation, immerse the appliance in water or any other liquid.
- Unplug the appliance after using or before cleaning.
- Keep the appliance 8 cm from other objects to ensure the good heat releasing.
- Do not use the accessories which are not recommended by Manufacturer.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance.
- Do not use the appliance close by flames, hot plates or stoves.
- Do not switch on the power button frequently (ensure 5 min. interval at least) to avoid the damage of compressor.
- Metal sheet or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuit.
- When take out the ice cream, do not knock the barrel or edge of barrel to protect the barrel from damage.
- Do not switch on the power before install well the barrel or blender blade.
- The initial temperature of the ingredients is 25±5°C. Do not put the ingredients into freezer for pre-freeze, as it will easily make the blender blade blocked before the ice cream is in good condition.
- Do not remove the blender blade when the appliance is on working.
- Do not use outdoors.
- Never clean with scouring powders or hard implements.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- This appliance is intended to be used in household and similar applications.
This appliance contains the coolant isobutane (R600a),a natural gas which is environmentally friendly. Although it is fl ammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this coolant has,however,led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor,you might be able to hear the coolant fl owing around the system. This is unavoidable,and does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and setting up of the appliance that no parts of the cooling system are damaged. Leaking coolant can damage the eyes.
Special Notes
- When positioning the unit, make sure that the power cord is not pinched or damaged.
- Make sure that there are no multiple sockets or power supplies on the back of the unit.
- To avoid contamination of food, please follow the instructions below:Regularly clean surfaces that may come into contact with food.WARNINGWhen using, servicing and disposing of the unit, pay attention to the left symbol on the rear of the unit or on the compressor. This symbol warns of possible fi res. There are fl ammable substances in the refrigerant lines and in the compressor. Keep the appliance away from sources of fi re during use, maintenance and disposal.
PRODUCT DESCRIPTION
SETUP AND OPERATION
Before use
Wash all parts that come into contact with the ice cream carefully (including
the solid bowl, removable bowl, mixer blade, transparent lid, refill lid,
measuring cup and spoon).NOTE: You do not have to pre-cool the bowl in the
freezer in advance because the device has a compressor that cools the
ingredients during ice cream making.
ASSEMBLY
WARNING
Risk of injury. Always unplug the plug from the electrical outlet before you
asseble the unit.
- Before use, place the device upright on a level, stable surface. Insert the removable bowl in the device.
- Next insert the mixer blade in the removable bowl.
- Place the transparent lid on the bowl, and make sure that the mixer blade is fi xed in the center of the lid.
- Place the refi ll lid on the transparent lid.
- Fasten the motor on the transparent cover and make sure that the motor is fi rmly seated in the hole above the mixer blade.
Operation
Check the voltage on the equipment label before use. Only connect the device to sockets which correspond to the voltage of the device.
Button Function
POWER Insert the plug into the socket. Press the POWER button to turn the
device on. The display shows [60:00], and the preset time is 60 minutes.
TIMER You can set the timer in 10-minute increments between 10–60
minutes. To do so, press the TIMER button repeatedly to set the timer to the
desired time. The preset time for the timer is 60 minutes.
START/ Set the timer first. Then press START / STOP to start the ice cream
STOP production. During ice cream production, the display will remain illuminated all the time. Press START / STOP during ice cream production to stop and restart the mixer blade. The compressor will continue cooling even when you stop the mixer blade.
NOTE: Do not hold down the START / STOP button for more than 3 seconds, otherwise the device will be reset to the default settings and all settings will be cleared.When the set time has elapsed, the motor will stop automatically and will beep 10 times in a row. The display will show [00:00], and the display will fl ash in secondary mode. If you do not empty the device in the next 10 minutes, it will enter the cooling mode so that the ice cream does not thaw.
Extended cooling function
The cooling function is maintained for up to a maximum of 1 hour. Then the
device will return to the default state. In this case, the display will be
illuminated, but no functions will be active.
WARNING
Risk of electric shock. Always remove the plug from the socket before you
remove the ice cream to avoid electric shock.
SETTINGS AND EXTENDED FUNCTIONS
Cancel ice cream production
To stop ice cream production, press and hold START / STOP during ice cream
production for 3 seconds, or press the POWER button.
Setting the timer during ice cream production
You can also change the set time while the device is already running. Press
the TIMER button repeatedly. Each push of the button adds 5 minutes to the
running time until the maximum of 60 minutes is reached. The set time is shown
on the display. The running time can only be increased but not decreased.
Adding time after ice cream production
When the preset time has elapsed, the device will stop and enter the cooling
mode. If you like your ice cream harder, you can restart the device and set
the timer to 10–60 minutes again. Then, press START / STOP to restart the
device. When the timer has expired, the device will stop again and enter the
cooling mode so that the ice cream does not thaw.
Important information about the amount of ingredients:
To prevent overflow and unnecessary waste, make sure that the removable bowl
is filled to a maximum of 60%. Ice cream expands during ice production.
Storing the prepared ice cream
Remove the inner bowl, and use a plastic or wooden spoon to fill the ice cream
into a container suitable for freezing. To avoid scratching the surface of the
bowl, do not use metal scoops or kitchen utensils.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
References
- Klarstein | Your home. Your kitchen. Your style.
- Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>