KLARSTEIN 10030415 Airflex 360 Degree Stand Fan Instruction Manual

: June 5, 2024
: Klarstein

KLARSTEIN 10030415 Airflex 360 Degree Stand Fan

KLARSTEIN 10030415 Airflex 360 Degree Stand Fan
product

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

KLARSTEIN qr code

TECHNICAL DATA

Item number	10030415
Power supply	220-240 V ~ 50 Hz
Power consumption	65 W

SAFETY INSTRUCTIONS

Packaging materials (plastic bags, polystyrene, staples etc.) Must be kept out of the reach of children as they could be hazardous.
Children over the age of 8 and persons with reduced physical, sensory or mental capabilities or those with a lack of experience and knowledge may only use the device if they are instructed on how to do so by a person responsible for their safety, or if they are supervised and understand the hazards associated with the use of the device. Children may not clean or carry out user maintenance without supervision.
Do not leave the appliance unattended.
Before connecting the appliance, check that the appliance rating corresponds to the mains rating.
This appliance must only be used for the purpose for which it has been manufactured. As a stand fan. The manufacturer is not responsible for any damage caused by improper or incorrect use.
The installation/assembly of the device will be made according to the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible.
Before cleaning or carrying out maintenance on the appliance, disconnect it from the electrical mains by removing the plug from the electrical outlet or by switching off the system switch.
The appliance is not to be used if there are signs of damage. If the appliance is faulty and/or operating incorrectly, switch it off without tampering with it. If the above is disregarded, the safety of the appliance may be compromised.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Do not power the device using multiple sockets.
Do not use adapters and/or extension cable.
The device must not be switched on using external timers and/or other remote control devices which are not specified in this manual.
Do not use or store the device near heat sources (heaters, stoves).
Do not dip the device in water or other liquids; in case the accidental fall in the water do not try to take it out, but first of all unplug immediately the power cable from the socket.
If you use the device for the first time, make sure to remove any label or protective sheet which blocks its proper functioning.
Do not pull the plug out of the socket by the cable, but hold it firmly by hand when pulling it off.
Before plugging the plug into a wall outlet, make sure that the unit is switched off.
Always unplug the power cable to avoid the overheating and avoid stretching it.
Make sure that all air intakes and outlets are free and not covered so that the unit does not overheat.
Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily.
Do not hang the fan on the wall or ceiling unless this type of installation is provided and explained in this manual.
Place the device at a proper distance from the objects or surrounding walls making sure that its functioning will not cause accidental damages.
Do not use the device near gas stoves or open flames in general.
Do not use the device near curtains or textiles.
Do not cover the device during functioning.
Do not expose yourself for a long period to the air flow generated by the device because it can cause damage to the health.
If the fan must be stored for a long period and is not used regularly, place the fan in its original packaging in a dry place.
Always remember to unplug the power cable of the device if it is not used for a long period, before storing, cleaning or performing any maintenance operation.
Do not use the appliance in the presence of potentially flammable or explosive liquids or gases.
The appliance is not intended for commercial use, but only for household and similar environments. This includes kitchens in offices, farms, hotels, motels and Bed & Breakfasts. Do not use outdoors.

PRODUCT DESCRIPTION

1	Right air inlet	11	Front housing
2	LED indicator light	12	Body sensor
3	Right side panel	13	Remote control sensor
4	Control panel	14	Swivel base
5	Rear housing	15	Remote control
6	Power cord	16	Remote control holder
7	Support nut	17	Stand
8	Left air intake	18	Base
9	Decorative cover	19	Weight
10	Left side panel

Control panel and remote control

Control panel and remote control 02

On / Off / Standby
Mode
Timer
Speed
Swing horizontally / body sensor function
Vertical swing

Display and indicator lights

7	On/Off/Standby	12	High speed
8	Natural Mode	13	Medium speed
9	Sleep Mode	14	Low speed
10	Eco Mode	15	Pivot angle horizontal
11	Timer	16	Swing vertical

USE AND OPERATION

Installation

Take out parts for assembling.
Put the power cord through the hole of base, stand the support on the base and fix them tightly by screw (Picture 1).
Place the machine body into the tube-shape pillar (Picture 2).
Then, take out the grub screw and cross screwdriver to fix the body on the tube-shape pillar (Picture 3).
After the below installation, plug in and operate according to the following instructions when placing on the flat ground (Picture 4).

Operation

Touch screen control technic has been used in this unit, all of unit’s function can be operated by touch the display window signs slightly. NOTE: When plug in, the machine shows proper insert on the condition that all LED lights turn on for 2 seconds and BIBI sounds; then, all LED lights turn off and leave it on Standby; besides the STAND-BY, no button is workable.

Standby Mode

Under standby state, no button is workable but STAND-BY; The machine starts to work by press STAND-BY, which shows the the initial wind mode as “Normal” and wind speed stays on “Low”, having accordingly LED light show; without timer and swing function. On the other hand, under standby state, when plug in for the first time, the body sensor function is available; the working instructions like wind speed, mode and oscillation for the last time will all be conserved on the condition that the power is on and the machine starts for at least for the second time (Timing hours will not be conserved under sleeping mode).

Speed

While working, press this button for LOW, MIDDLE and HIGH speed selection. The indicators show on the display accordingly.

Timer

There is no timer and related display show under the initial conditions. Press the TIMER button, you can set the running time for this fan, Time setting as: 1H > 2H > 4H > 8H. When setting, the indicator and the figure shows on the display.

Horizontal Oscillation / Body Sensor

Press this button for horizontal oscillation selection, with the following set rules: 0 represents no horizontal oscillation and 60° > 90° > 180° > 360° show accordingly horizontal oscillation angle, The indicators show on the display accordingly. Press this button for 2.5 seconds to start infrared body sensor function, with two “BI” sounds.
Infrared body sensor function: 360° horizontal oscillation once starts, to figure out the suitable angle for people stand and swing according to this angle for the following work; on the other hand, the machine would restart to search angle if the human signal is changed.

Vertical Oscillation

To set the vertical angle by pressing this button; Press once to start the 90° vertical oscillation and stop it for on the second time.

Mode

The initial wind mode remains on “Normal” , press MODE button to switch between “ Normal” – “Natural” – “ Sleeping” – “ ECO”, the LED indicator changes accordingly. All mode have its accordingly LED indicator on the panel, but the Normal mode.

Usage for remote control

One button battery (CR2032 3V) has been used in our remote control. Please insert the battery to remote control tightly based on the direction of the po- larity. If it does not use for a long time, please pull the battery out from the remote control.

Running conditions for different modes

Normal	High speed

Medium speed
Low speed
Natural| Swing to create a natural breeze (at high, medium and low speed.
Sleep| High speed: 30 minutes of strong, natural wind > 30 minutes of medium, natural wind > After that, the unit continues to run at low speed.
Medium speed: 30 minutes of medium, natural wind > After that, the unit continues to run at low speed.
Low speed: The unit runs constantly at low speed.
Eco| When the room temperature is below 25°C, the unit runs at low speed. When the room temperature rises between 25-29°C, the unit runs at medium speed. The speed key and the associated indicator lights are inactive in this mode.
Save| As long as the unit is in standby mode and is not disconnected from the power supply, the last settings (speed, swing, mode) are saved. Set timers and sleep mode are not saved.
Auto dim| The indicator light automatically dims down if no further setting is made for more than 1 minute. The display is then only dimly illuminated. If you press a key, the display lights up again with full brightness.

CLEANING AND CARE

Always remember unplug the fan before cleaning, or may cause electric shock or product damage.
Wipe all parts with a soft cloth. Do not use any of the following as a cleaner: gasoline, thinner, benzine.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.