KLARSTEIN 10037979 Bella Mini Mixer Food Processor Instruction Manual

: June 5, 2024
: Klarstein

Table of Contents

KLARSTEIN 10037979 Bella Mini Mixer Food Processor
TECHNICAL DATA
SAFETY INSTRUCTIONS
DEVICE OVERVIEW
COMMISSIONING
Disassemble the device
CLEANING OF THE MACHINE
DISPOSAL INSTRUCTIONS
MANUFACTURER & IMPORTER (UK)
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KLARSTEIN 10037979 Bella Mini Mixer Food Processor

Dear customer,
Congratulations on the purchase of your unit. Please read the following instructions carefully and follow them to prevent possible damage. We accept no liability for damage caused by disregarding the instructions and improper use. Please scan the QR code to access the latest operating instructions and further information about the product.

TECHNICAL DATA

Product code	10037979, 10037980, 10037981
Power supply	220-240 V ~ 50/60 Hz
Power	1200 W
Bowl volume	4 L

You can obtain spare parts under the following article numbers:

10025042 = Bowl	10025044 = Mixing knife
10025043 = dough hook	10025045 = Whisk

SAFETY INSTRUCTIONS

Before use, check the voltage on the appliance label and only connect the appliance to sockets that match the voltage of the appliance. If you are not sure whether your connections meet the requirements, consult an electrician or your electricity provider.
Always switch off the motor before inserting the plug into the socket.
To prevent electric shock, never completely immerse the base of the unit in water or other liquids.
If the power cord is damaged, it must be replaced by the manufacturer, an authorised specialist company or a similarly qualified person.
Do not bend the mains cable or let it hang over the work surface so that no one can get caught on it.
Do not place the appliance near open stoves, hot ovens or easily inflammable materials such as curtains or textiles.
Place the unit on a stable, level surface before use.
Children from the age of 8 years and mentally, sensory and physically impaired persons may only use the device if they have been informed in detail about the functions and safety precautions by a supervisor responsible for them beforehand and understand the associated risks.
Make sure that children do not play with the appliance.
Place the unit as close as possible to the power source so that you can unplug it quickly and easily when needed.
Check the power cord regularly for damage. Do not use the device with a damaged power cord.
Use the device only indoors and only for the specified purpose.
Keep children away from the appliance and store it out of the reach of children.
Do not use the device without contents and only under supervision.
Do not touch moving parts with your hands during use.
Keep the operating instructions and only pass on the device with the operating instructions.
Use only original accessories.
Unplug the machine before cleaning or when no longer in use.
Switch off and unplug the machine before changing or removing moving parts.
The device contains parts that are not accessible to the user. Do not remove any covers or attempt to repair the unit yourself. Repairs may only be carried out by qualified specialists.
Do not connect the appliance to multiple sockets, external timers or remote-controlled sockets.

Note: The device is designed for short-time operation only, i.e. it should not be operated continuously for more than 4 minutes. Afterwards, switch off the appliance and let the motor cool down before switching it on again.

DEVICE OVERVIEW

Dough hook
Suction cups
Top cover
Beater
Upper housing
Mixing bowl
Safety release button
Splash guard
Device base
Whisk
Controller

COMMISSIONING

Press the release button and move the drive arm upwards.
Place the mixing bowl in the appliance base.
Fix the mixing bowl by turning it slightly counterclockwise until it is fixed.
Place the splash guard on the drive arm from below. The filler opening with flap should point in the direction of the speed regulator.
Carefully press the splash guard until it clicks into place.
Select the appropriate attachment: Dough hook: For heavy dough, e.g. bread dough Whisk: For whipping cream, beaten egg whites, etc. Whisk: For medium to light doughs/butter, e.g. batter for (pan) cakes.
Insert the attachment from below into the corresponding opening in the drive arm. Make sure that the small prongs on the shaft of the attachment are inserted into the cross slot of the opening.
Carefully push in the selected attachment and turn it clockwise until it clicks into place.
Press the release button and swing the drive arm into the operating position. The device is now ready for operation.

Disassemble the device

Press the release button and swing the drive arm up.
To remove an attachment, press it in gently and unlock it by carefully turning it counterclockwise.
Remove the attachment.
To remove the splash guard, pull it down. First pull the splash guard slightly downwards at the rear.
Unlock the mixing bowl by turning it slightly clockwise.
Remove the mixing bowl.
Press the release button and swing the drive arm down to the operating position.

Speed adjustment, switching on and off

Turn on the device by turning the speed control knob on the right side.
When stirring, start with a lower speed and increase it slowly.

Recommendations for speed levels

Stage	Accessories	Description
1 – 3	All	• Start position for stirring

• When adding ingredients

• 0,36 kg lukewarm water

| | Preparation:
| | 1. Put all the ingredients in the mixing bowl.

2. Attach the splash guard and the dough hook.

3. Speed: Let the dough knead for 30 seconds on speed 1. Then leave the dough to knead for 30 seconds on speed 2. Then leave the dough to knead for 3 minutes on speed 3.

Stage	Accessories	Description
4 – 6	Whisk	• Cream

• Egg white

• Mayonnaise

• beat the butter until it is fluffy

Ingredients:

13 egg white

Preparation:

1. Put the egg whites into the mixing bowl.

2. Attach the splash guard and the dough hook.

3. Beat the egg whites on speed 6 for 4

minutes until stiff.

CLEANING OF THE MACHINE

To avoid the risk of electric shock, injury or damage:

Disconnect the power plug from the socket before cleaning.
Never immerse the base of the unit in water.
Never use abrasive, corrosive or scouring cleaners as they may damage the machine.

Cleaning the base of the machine

Clean the base of the machine with a damp cloth. You can also use a little dishwashing liquid.
Wipe off with a clean cloth.
Do not use the device base again until it is completely dry

Cleaning of splash guard, dough hook, whisk and beater
Note: The dough hook and beater are not dishwasher safe. The mixing bowl and whisk can be cleaned in the dishwasher.

Place the pieces in cold or lukewarm water to soften any dough residue. You can also add a little washing detergent to the water.
Remove the softened dough residues with a cleaning brush.
Rinse the parts with clean water.
Allow the parts to dry completely before using them again.

Cleaning the mixing bowl
The mixing bowl is made of stainless steel and can be cleaned in the sink or in the dishwasher.

DISPOSAL INSTRUCTIONS

If there is a legal regulation in your country regarding the disposal of electrical and electronic equipment, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of this product in accordance with the regulations, you protect the environment and the health of those around you from negative consequences. For information on recycling and disposal of this product, contact your local government or household waste disposal service.