Haltian Gateway Global IoT Sensors and Gateway Device Installation Guide
- June 5, 2024
- Haltian
Table of Contents
Gateway Global IoT Sensors and Gateway Device
Installation Guide
Welcome to using Thingsee
Congratulations on choosing Haltian Thingsee as your IoT solution.
We at Haltian want to make IoT easy and accessible for everyone, so we have
created a solution platform that is easy to use, scalable and secure. I hope
our solution will help you achieve your business goals!
Thingsee GATEWAY GLOBAL
Thingsee GATEWAY GLOBAL is a plug & play IoT gateway device for large scale
IoT solutions. It can be connected anywhere in the world with its LTE Cat M1
/NB-IoT and 2G cellular support. The main role of Thingsee GATEWAY GLOBAL is
to ensure that data flows continuously, reliably and safely from the sensors
to the cloud.
Thingsee GATEWAY GLOBAL connects a mesh of a few to hundreds of wireless
sensor devices to Thingsee Operations Cloud. It exchanges data with the mesh
network and sends data to cloud backends.
Sales package content
- Thingsee GATEWAY GLOBAL
- Includes SIM card and managed SIM subscription
- Power supply unit (micro-USB)
Note before installation
Install the gateway to a secure location. In public places, install the
gateway behind locked doors.
To ensure strong enough signal strength for data delivery, keep the maximum
distance between mesh network devices under 20 m.
If the distance between a measuring sensor and the gateway is > 20m or if the sensors are separated by a fire door or other thick building materials, use extra sensors as routers.
Thingsee installation network structure
Thingsee devices build a network automatically. Devices communicate all the
time to adjust the network structure for effective data delivery.
Sensors create subnetworks for data delivery by choosing the best possible
route based on signal strength. The subnetwork chooses the strongest possible
gateway connection for data delivery to the cloud.
The customer network is closed and secure. It cannot be harmed by third party
connections.
———–Network communication
———–Data flow
The amount sensors per one gateway varies depending on the sensors’ reporting
time: the longer the reporting time, the more sensor can be connected to one
gateway. The usual amount is from 50-100 sensors per gateway to even up to
200 sensors.
To ensure mesh network data flow, a second gateway can be installed on the
other side of the installation site.
Things to avoid in installation
Avoid installing the Thingsee products near the following:
Escalators
Electrical transformers or thick electrical wires
Nearby halogen lamps, fluorescent lamps or similar lamps with hot surface
Thick concrete structures or thick fire doors
Nearby radio equipment like WiFi routers or any other similar high power RF transmitters
Inside metal box or covered with a metal plate
Inside or underneath a metal cabinet or box
Near elevator motors or similar targets causing a strong magnetic field
Data integration
Make sure that data integration has been properly setup prior to the installation process. See link https://support.haltian.com/howto/aws/ Thingsee data can be pulled (subscribed) from the Thingsee Cloud live data stream, or the data can be pushed to your defined end point (e.g. Azure IoT Hub before you install the sensors.)
Installation
Please make sure the Thingsee GATEWAY GLOBAL is installed before you install
the sensors.
To identify the gateway, read the QR code on the backside of the device with a
QR code reader or Thingsee installation application on your mobile device.
Identifying the device is not necessary, but it will help you keep track of
your IoT installation and help Haltian support to solve possible issues.
To identify the device over Thingsee API, please follow the link for further information: https://support.haltian.com/api/open-services-api/api- sequences/
Connect the power source to the gateway and plug it into a wall socket with
24/7 power.
Note: always use the power source included in the sales package.
Note: The socket-outlet for the power source shall be installed near the
equipment and shall be easily accessible.
Thingsee GATEWAY GLOBAL is always cellular connected:
LED indication is used to provide gateway status information.
The LED on top of the device starts to blink:
-
RED blink – device is connecting to mobile network
-
RED/GREEN blink – device is connecting to Thingsee cloud
-
GREEN blink – device is connected to the mobile network and Thingsee cloud and is operating correctly
To close the device press the Power button for 3 seconds.
When released, the device starts the shutdown process, red LED indication 5
times during a 2 second period. When in shutdown state, no LED indication. To
restart the device press the power button once and the LED sequence starts
again.
Device info
Recommended operating temperature: 0 °C … +40 °C
Operating humidity: 8 % … 90 % RH non-condensing
Storage temperature: 0°C … +25 °C
Storage humidity: 5 % … 95 % RH non-condensing
IP rating grade: IP40
Indoor office use only
Certifications: CE, FCC, ISED, RoHS and RCM compliant
BT with Wirepas mesh network support
Radio sensitivity: -95 dBm BTLE
Wireless Range 5-25 m indoor, up to 100 m Line of Sight
Cellular networks
- LTE Cat M1/NB-IoT
- GSM 850 MHz
- E-GSM 900 MHz
- DCS 1800 MHz
- PCS 1900 MHz
Micro SIM card slot
- Includes SIM card and managed SIM subscription
LED indication for device status
Power button
Micro USB powered
Maximum transmit power
Supported radio networks| Operating frequency bands| Max.
transmitted radio frequency power
---|---|---
LTE Cat M1| 2, 3, 4, 5, 8, 12, 13, 20, 26, 28| +23 dBm
LTE NB-10T| 2, 3, 4, 5, 8, 12, 13, 20, 26, 28| +23 dBm
2G GPRS/EGPRS| 850/900 MHz| +33/27 dBm
2G GPRS/EGPRS| 1800/1900 MHz| +30/26 dBm
Wirepas mesh| ISM 2.4 GHz| ISM 2.4 GHz
Device measurements
CERTIFICATION INFORMATION
EU DECLARATION OF CONFORMITY
Hereby, Haltian Oy declares that the radio equipment type Thingsee GATEWAY is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.haltian.com
Thingsee GATEWAY operates at Bluetooth® 2.4 GHz frequency, GSM 850/900 MHz, GSM 1800/1900 MHz bands and LTE Cat M1/ NB-IoT 2, 3, 4, 5 ,8, 12, 13, 20, 26, 28 bands. Maximum radio-frequency powers transmitted are +4.0 dBm, +33.0 dBm and +30.0 dBm, respectively.
Manufacturer name and address:
Haltian Oy
Yrttipellontie 1 D
90230 Oulu
Finland
FCC REQUIREMENTS FOR OPERATION IN THE UNITED STATES
FCC Information for the User
This product does not contain any user serviceable components and is to be
used with approved, internal antennas only.
Any product changes of modifications will invalidate all applicable regulatory
certifications and approvals.
FCC Guidelines for human Exposure
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following methods:
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an electrical outlet on a circuit different from that which the radio receiver is connected
- Consult the dealer or and experienced radio/TV technician for help
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC compliance statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA (ISED) REGULATORY
INFORMATION
This device complies with RSS-247 of the Innovation, Science and Economic
Development Canada (ISED) Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept ny interference received, including interference that may
cause undesired operation.
Radiation Exposure Statement:
This device complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment must be installed and used with a
minimum distance of 20 cm between the radiator and your body.
FCC ID: 2AEU3TSGWGBL
IC: 20236-TSGWGBL
RCM-approved for Australia and New Zealand.
SAFETY GUIDE
Read these simple guidelines. Not following them may be dangerous or against
local laws and regulations. For further information, read the user guide and
visit https://www.haltian.com
Usage
Do not cover the device as it may prevent the device from operating properly.
Safety distance
Due to radio frequency exposure limits the gateway should be installed and
operated with a minimum distance of 20 cm between the device and the body of
the user or nearby persons.
Care and maintenance
Handle your device with care. The following suggestions help you keep your
device operational.
- Do not open the device other than as instructed in the user guide.
- Unauthorized modifications may damage the device and violate regulations governing radio devices.
- Do not drop, knock, or shake the device. Rough handling can break it.
- Only use a soft, clean, dry cloth to clean the surface of the device. Do not clean the device with solvents, toxic chemicals or strong detergents as they may damage your device and void the warranty.
- Do not paint the device. Paint can prevent proper operation.
Damage
If the device is damaged contact support@haltian.com. Only qualified personnel
may repair this device.
Small children
Your device is not a toy. It may contain small parts. Keep them out of the
reach of small children.
RECYCLING
Check the local regulations for proper disposal of electronic products. The
Directive on Waste Electrical and Electronic Equipment (WEEE), which entered
into force as European law on 13th February 2003, resulted in a major change
in the treatment of electrical equipment at end-of-life. The purpose of this
Directive is, as a first priority, the prevention of WEEE, and in addition,
to promote the reuse, recycling and other forms of recovery of such wastes so
as to reduce disposal. The crossed-out wheelie-bin symbol on your product,
battery, literature, or packaging reminds you that all electrical and
electronic products and batteries must be taken to separate collection at the
end of their working life. Do not dispose of these products as unsorted
municipal waste: take them for recycling. For info on your nearest recycling
point, check with your local waste authority.
Get to know other Thingsee devices
For all devices and more information, visit our website
www.haltian.com or contact
sales@haltian.com
References
- Connected solutions for successful businesses | Haltian
- How to connect to AWS API Gateway - Haltian Support
- Connected solutions for successful businesses | Haltian
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>