KLARSTEIN 10035063 Hot Spot Crystal Spotless Smart Infrared Heater User Manual

www.klarstein.com
HOT SPOT CRYSTAL
SPOTLESS SMART
Infrared Heater
10035063

Note: This product is only suitable for well insulated spaces or occasional use.

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10035063

TECHNICAL DATA

SAFETY INSTRUCTIONS

• Do not use the appliance until it is securely fi xed as described in this manual.

• Check that the voltage indicates on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.

• If the supply cord is damaged, it must be replaced by a qualifi ed engineer in order to avoid a hazard.

• The fi replace heater must not be positioned directly under the power socket.

• Keep furniture, curtains and other fl ammable material at least 1 meter away from the appliance.

• Do not leave the appliance unattended during use.

• Do not leave the appliance unattended whilst connected to the mains supply.

• Keep out of reach of children and do not allow them to operate this appliance.

• This appliance is intended for household use only and should not be used for industrial purposes.

• Do not operate this appliance after a malfunction or after being damaged in any way.

• Repairs to electrical appliances should only be performed by a qualifi ed electrician.

• Improper repairs may place user at serious risk.

• Do not run the mains cable under carpets, rugs, etc.

• Do not allow the mains cable to hang over sharp edges or come in contact with hot surfaces.

• In order to avoid overheating, do not cover the heater.

• Do not use this heater with a programmer, timer, separate remote control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.

• Never immerse the product in water or any other liquid for any reasons.

• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

• Do not use the appliance outdoors.

• Do not use if you have wet hands.

• Never use the appliance on or near hot surfaces.

• Do not operate with a damaged cord.

• Before cleaning the appliance, make sure it is unplugged from the power and that it is completely cooled.

• Do not clean the appliance with abrasive chemicals.

• Never use accessories that are not recommended or supplied by the manufacturer.
  It could cause danger to the user or damage to the appliance.

• This appliance is not intended for use by persons (including children) with reduced Physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

CAUTION
Risk of burns! Some parts of this product can become very hot and  cause burns. Particular attention has to be given where children and vulnerable people are present.

PRODUCT DATA SHEET

heaters only
Nominal heat output| Pnom| 0,85| kW| | manual heat charge control, with integrated thermostat| N/A
Minimum heat output (indicative)| Pmin| 0,85| kW| | manual heat charge control with room and/or outdoor temperature feedback| N/A
Maximum continuous heat output| Pmax,c| 0,85| kW| | electronic heat charge control with room and/or outdoor temperature feedback| N/A
Auxiliary electricity consumption| | fan assisted heat output| N/A
At nominal heat output (fan motor)| elmax| N/A| kW| | Type of heat output/room temperature control**
At minimum heat output (fan motor)| elmin| N/A| kW| | single stage heat output and no room temperature control| no
In standby mode| elSB| 0,0008| kW| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| no
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| yes
| Other control options (multiple selections possible)
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| yes
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, Wallstraf3e 16, 10179, Berlin, Germany

FUNCTION KEYS

Control panel

| 1 Control panel
2 On/off button
3 Parental control
4 Timer button
5 Mode button
6 Raise temperature
7 Reduce temperature
---|---

INSTALLATION

Wall installation
The unit must be installed at least 15 cm above the floor and at a minimum distance of 50 cm from the ceiling. Four fixed retaining screws (M8) are located at the rear of the unit body.
The following accessories are included in the delivery:

| 8 Mounting bracket
9 Wall spacer
10 Washer
11 Fastening nut
12 Dowels
13 Screw 4*35 mm
---|---

Wall mounting

1. Drill two holes (diameter < 8 mm) on each side of the wall and insert a plastic dowel into each hole Then fix the brackets with the 4 x 35 mm screws (the distance between the holes should be as shown below).
2. Insert the top row of retaining screws into the bracket and fix it with the nuts and washers (see figure 1).
3. The spacers are screwed onto the upper row of retaining screws at the bottom and can be adjusted accordingly (see figure 2).

COMMISSIONING AND OPERATION

The heating plate can be used with 220 – 240 V ~ 50/60 Hz. Insert the power plug of the appliance into the power outlet, turn on the power switch. You can now use the appliance both via the control panel and with the remote control.
Turn on
First, set the power switch of the device, which is located on the side of the device, to the „I“ position. Press the button to set the function. The upper part of the control panel displays the room temperature. The unit will now run at a low power level.

Mode
Press the Mode button to adjust the power.
Temperature adjustment
Press the buttons to set the desired temperature in the range 5 °C – 40 °C. The temperature display remains illuminated for a longer period of time.
Timer
Press the timer button to set the timer. You can set the time until the automatic switch-off.
You can select a period between 1 – 24 hours. The remaining time until power off is displayed on the screen.
Parental lock
If you press and hold the parental control button for 3 seconds, the symbol appears on the screen. All buttons are now deactivated. You can deactivate the parental control in the same way.

DEVICE CONTROL BY SMARTPHONE

If you integrate the device into your home WiFi, you can conveniently operate it via the associated Klarstein app. The app not only allows you to remotely control the device via your smartphone, but also gives you access to recipes and additional information.
Follow these steps to connect your smartphone to your Klarstein device:

1. Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
2. Make sure your smartphone is connected to the same WiFi network that your Klarstein device is to be connected to.
3. Open the Klarstein app.
4. Sign in to your account. If you do not have an account, sign up in the Klarstein app.
5. Follow the instructions from the app.

App Download
Use the scan function of your smartphone to scan the QR code and save the app on your smartphone.

Note: The app provides further information on how to use the app and help on how to connect to your device as soon as you open it for the first time.

iOS

|

Android

---|---
|
https://apps.apple.com/app/id1479571307#?platform=iphone| https://play.google.com/store/apps/details?id=com.chaltec.klarsteinrn&hl=en

Troubleshooting connection problems
If your Klarstein device cannot be found in the WLAN, check the following:

• Is the device plugged in?
• Is the WiFi feature of my phone enabled?
• Is the WiFi function of the Klarstein device activated? (Follow the instructions in the app)
• Has the WLAN password been entered correctly?
• Are the router, Klarstein device and smartphone in the immediate vicinity during the connection attempt? (Ideally no more than 5 m apart)
• If you have deactivated the 2.4 GHz band in the settings of your wireless router, activate it in your router settings.

Note: For further help, follow the instructions in the app when setting up the connection.

CLEANING AND CARE

• Always unplug the appliance from the power outlet and allow it to cool down completely before cleaning and servicing the appliance.
• Clean the air vents regularly.
• Never use aggressive or abrasive cleaning agents for cleaning.
• Clean the outer cover with a soft, damp cloth. Do not allow any liquid to penetrate the heater!
• Never use alcohol, petrol, abrasive cleaners, furniture polish or coarse brushes to clean the heater. This may cause damage or wear to the surface of the heater.
• If you do not use the heater for a long time, remove the batteries from the remote control (to prevent corrosion) and store the remote control in a safe place.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
The complete declaration of conformity of the manufacturer can be found at the following link: use.berlin/10035063

References

• Klarstein | Your home. Your kitchen. Your style.
• Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>