Klarstein 10035543 Tumble Dryer User Manual
- June 5, 2024
- Klarstein
Table of Contents
- Klarstein 10035543 Tumble Dryer
- TECHNICAL DATA
- SAFETY INSTRUCTIONS
- Location and operation
- INSTALLATION
- INSTALLATION ON THE FLOOR
- INSTALLATION ON THE WALL
- LOADING AND SUITABLE TEXTILES
- DEVICE OVERVIEW
- OPERATION
- CLEANING AND CARE
- TROUBLESHOOTING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Klarstein 10035543 Tumble Dryer
Dear Customer,
Congratulations on purchasing this device. Please read the following
instructions carefully and follow them to prevent possible damages. We assume
no liability for damage caused by disregard of the instructions and improper
use. Scan the QR code to get access to the latest user manual and more product
information.
TECHNICAL DATA
Item number | 10035543, 10035544 |
---|---|
Power supply | 220-240 V ~ 50/60 Hz |
Power consumption | 1500 W |
Dimensions | 595 x 510 x 681 mm |
Max. Loading | 6 kg |
SAFETY INSTRUCTIONS
General safety instructions
- This appliance may be used by children over 8 years of age and by persons with reduced physical, sensory or mental capabilities and/or lack of experience and knowledge and/or lack of experience and knowledge, provided that they are supervised by a person responsible for them when using the appliance or have been instructed in the use of the appliance by such a person and understand the risks involved in using the appliance.
- Keep children under 8 years of age away from the appliance.
- Supervise children so that they do not play with the appliance.
- Cleaning and maintenance of the appliance by children over 8 years of age must only be carried out under supervision.
- Have a damaged power cord replaced by the manufacturer, the customer service or a similarly qualified person in order to avoid hazards.
- Do not use the dryer if chemical detergents have been used for cleaning.
- The lint filter must be cleaned regularly.
- Make sure that no lint accumulates around the dryer.
- Do not dry unwashed clothes in the dryer.
- Clothing that has come into contact with substances such as oil, acetone, alcohol, methylated spirits, kerosene, stain removers, turpentine, wax and wax remover should be washed in hot water with an extra portion of detergent before drying in the dryer.
- Objects such as foam rubber (latex moulded), shower caps, waterproof textiles, objects with a rubber base and clothing or pillows with foam rubber padding should not be tumble dried.
- Fabric softeners or similar products should be used as indicated in the instructions for fabric softeners.
- Never stop the dryer before the end of the drying cycle unless all items are removed and distributed immediately to allow heat to escape.
- Do not discharge the exhaust air into a fume cupboard used to extract the fumes from appliances that burn gas or other fuels.
- The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the side opposite the tumble dryer. The door of the tumble dryer must be designed to prevent it from being opened completely.
- Objects soiled with oil may ignite spontaneously, especially if they are exposed to heat sources, such as in a tumble dryer.
- The unit should not be turned over during normal use or maintenance.
- Before drying, remove all objects from the pockets, especially lighters and matches.
- For units where the ventilation hole is on the bottom, take care not to block the ventilation holes with carpets, etc.
- Remove all packaging before using the product.
Power Supply
- The dryer works with alternating current with nominal voltage and frequency. If the voltage fluctuates between 6% of the nominal voltage, the dryer can operate normally.
- Always connect the dryer to a separate power outlet to which no other household appliances are connected. Do not connect the dryer to a multi-socket outlet.
- The power plug must always be easily accessible, even after the appliance has been installed.
- The appliance must not be operated by an external device, such as a timer, and must not be connected to circuits that are regularly switched on and off.
Location and operation
- Install or store the device in a place where it is not exposed to temperatures below freezing point, water or weather conditions. Doing so may cause permanent damage that could void the warranty.
- Thoroughly spin-dry the laundry in the washing machine. A high spin speed can shorten the drying time in the dryer and reduce energy consumption.
- Do not wash or dry clothes that are contaminated with highly flammable or explosive substances (such as wax, oil, paint, gasoline, grease remover, dry cleaner, kerosene, etc.)
- Make sure that children do not climb on or into the device. Supervise children while the appliance is in operation.
- Do not store plastic, paper or clothing on the product while it is operating as it may burn or melt.
- Do not dry rubber or plastic objects, etc. inside the product. This includes, but is not limited to, padded bras, tennis shoes, boots, bath mats, carpets, bibs, baby pants, raincoat plastic bags or plastic pillows that may melt or burn. Some rubber materials can spontaneously ignite and cause fire when heated under certain circumstances.
- Keep the area around the outlet opening and the adjacent surrounding areas free of lint, dust and dirt. A clogged opening can reduce the airflow.
- Make sure there are no spray cans with flammable contents near the dryer. If gas leaks, do not unplug the appliance or press any buttons on the appliance.
- Do not use the appliance if it malfunctions or has missing parts, is damaged, disassembled, or has broken parts, including a damaged power plug or power cord.
- Do not operate the product with wet hands or feet.
- Do not discharge the exhaust air into fume cupboards used for appliances that burn gas or other fuels.
- The door of the dryer can only be opened after the dryer programs have been completed. Never open the door before a program has been completed as this could cause burns from hot steam or hot appliance components.
INSTALLATION
- Place the unit in a well-ventilated area with a minimum distance of 10 cm from walls. It is recommended to keep a minimum distance of 1.5 m from other objects in front of the dryer to ensure adequate ventilation.
- Place the dryer in the desired location. Then check that the dryer is level. If it is not, adjust the feet with a screwdriver so that the dryer is level. If the dryer is not completely straight (the angle of inclination is less than 2°), the dryer may run unbalanced or sometimes stop operating.
- Do not install the dryer outdoors as it may be damaged by rain or other weather conditions.
- Make sure that there are no curtains or the like behind the appliance.
- Do not install the unit near gas or other highly flammable substances.
INSTALLATION ON THE FLOOR
If the dryer is not installed on the wall, place it on a level surface. Do not
place the dryer under combustible materials such as curtains and leave 15 cm
of space around the dryer to walls and other objects.
The dryer is supplied with adjustable feet. Adjust the feet so that the dryer
is fixed and level.
INSTALLATION ON THE WALL
Installation on a rack frame
If you want to install the dryer on the wall, you can alternatively place it
on a rack frame (not included). Leave 15 cm space around the dryer for walls
and other objects.
LOADING AND SUITABLE TEXTILES
Loading
We recommend that you load the dryer with only one piece of laundry at a time
so that the laundry dries evenly. Make sure that the laundry is not trapped in
the door when you close it.
Suitable and unsuitable textiles
Before placing the garment in the dryer, check the symbols on the garment to
see if it is suitable for drying in the tumble dryer. If any of the following
symbols are on the laundry, the garment is not suitable for drying in the
tumble dryer:
Before drying
- Make sure that there are no more objects, such as coins or pins, in or on the laundry.
- Close zippers and turn laundry to the left.
- Dry light and dark laundry separately.
- Load the dryer only with laundry made of similar materials.
- Do not fill the dryer with more than 3 kg of laundry.
Loading and drying times
Program | Max. loading | Max. drying time | Temperaturw | Clothing |
---|---|---|---|---|
Extra Dry | 4-6 kg | 165 min | 60 °C | Jeans, cotton |
clothing, sheet
Smart| 1-3 kg| 80 min| 55 °C| Cotton clothing, sheet
2 h| 5 kg| 130 min| 60 °C /40 °C /Airing| Cotton clothing, sheet
1 h 30 min| 3 kg| 100 min| 60 °C /40 °C /Airing| Cotton clothing, sheet
1 h| 2 kg| 70 min| 60 °C /40 °C /Airing| Cotton clothing, sheet
30 min| < 1kg| 40 min| 60 °C /40 °C /Airing| Cotton clothing, sheet
DEVICE OVERVIEW
OPERATION
1 | Power (On/Off) | 6 | Temperature display |
---|---|---|---|
2 |
Start/Pause
| 7| Temperature (temperature selection)
3| Preset (default settings)| 8| Time (set time)
4| Wrinkle Guard| 9| Smart (Intelligent Program)
5| Time display| 10| Bulky (for bulky items)
Operation
1 | Press the POWER button to turn on the power. |
---|---|
2 | Program setting |
You can select the program according to the clothing material and the amount
of clothing. After you press the POWER button, the time display window shows
[H2:35], which means that the preset time is 2 hours and 35 minutes.
Press the SMART button, the time display window shows [S-:–], which means
the smart program is active.
Press the TIME button to set the drying time as follows: 1:00 > 1:30 > 2:00 >
0:30
3| Temperature setting
When using the TIME program, the heating temperature can be set as follows:
High > Med > Air. After successful selection, the corresponding indicator
light in on the temperature display lights up.
4| Start/stop device
---|---
Press the START/STOP button and the dryer starts after 2 seconds. Press the
START/STOP button during operation to stop the appliance. In this state,
garments can be added or reduced. D
Note: Hot steam escapes when the door is opened!
Press the START/STOP button again to resume operation. The “Start/Stop” button
is the switch between starting and stopping the dryer. If you press the
START/STOP button immediately after switching on, the dryer runs according to
the intelligent program.
5| Wrinkle Guard function (crease protection)
After selecting the programme or while a programme is running, press the
WRINKLE GUARD key. The time in the time display increases by 10 minutes and
the wrinkle guard function is active. During operation, the function can be
activated or deactivated at any time by pressing the WRINKLE GUARD key.
6| Child lock
When the dryer is running, press the WRINKLE GUARD and PRESET buttons for 2
seconds until a signal sounds. The parental control indicator lights up on the
display and all keys are locked. Press WRINKLE GUARD and PRESET again to
deactivate the child lock.
CLEANING AND CARE
Note: Disconnect the plug from the socket before cleaning.
Removing the filter and Cleaning the filter
Insert filter and Clean air inlet filter Cleaning of the inner and outer surface
- Do not clean the device with running water.
- Do not use solvents, thinners or alcohol for cleaning.
- Clean the drum only with a damp cloth, do not use spray cleaners. Clean the drum before each use.
- Do not use scouring agents or abrasive sponges for cleaning, they will damage the surface of the unit.
TROUBLESHOOTING
Problem | Possible cause | Solution approach |
---|---|---|
Device cannot be started. | Power outage. | Wait until the power comes back on. |
The power plug is not in the socket. | Check the power outlet and insert the |
power plug correctly.
The weight is too high.| The clothes in the dryer must not weigh more than 3
kg.
The thermal fuse is blown.| Have the fuse replaced by
a qualified person.
The unit becomes hot or smells strong.| The lint filter is dirty.| Clean the lint filter after
each use.
The air inlet or outlet is dirty.| Clean the air inlet and outlet.
Clothing is too dry.| There are too many clothes in the dryer or The clothes
were not sorted properly.| Make sure there is not too much clothing in the
dryer.
The clothes have not been removed from the machine after the drying process is
finished.| Remove the clothes from the machine immediately after drying.
The temperature setting is too high.| Observe the label on the clothes.
Problem| Possible cause| Solution approach
---|---|---
The clothes are shrinking.| Temperature too high| Note the label on the
clothing. Hang them on the clothesline if they are not suitable for tumble
drying.
Loud noise is heard while the unit is in operation.| The wet clothes are too
heavy.| Reduce the amount of clothes in the dryer.
Air blasts can be heard.| Steam is generated when drying the clothes, which is
discharged.| This is normal and is not a malfunction.
DISPOSAL CONSIDERATIONS
If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
MANUFACTURER & IMPORTER (UK)
Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>