MICROPACK KM-239W RF 2.4G and Noiseless Wireless Keyboard and Mouse Combo User Manual
- June 5, 2024
- MICROPACK
Table of Contents
RF 2.4 & NOISELESS
KM 239W
WIRELESS COMBO
Cautions
Read this manual and cautions before using this device, improper use of this device may result in product damage.
- Do not expose this product to rain or wet conditions.
- Do not Disassemble, repair or modify this product.
- Please store and use this product at room temperature.
- Do not drop, to avoid falling product damage.
- Unauthorized removal will invalidate the warranty.
- If the battery is not replaced properly, there is an explosion risk, and only the same type or equivalent type of battery can be replaced.
- Batteries must not be exposed to warnings such as sunlightfire or similar overheating conditions.
Overview
| 1 | Left Key | 7 | Optical IC |
|---|---|---|---|
| 2 | Right Key | 8 | Power Switch |
| 3 | Scroll Wheel | 9 | Receiver & Battery Compartment |
| 4 | DPI Button | 10 | Indicator |
| 5 | Forward key | 11 | Peripheral Holder |
| 6 | Backward key | 12 | Multimedia Keys (Fn+) |
Features
- Peripheral holder, supports mobile phones or tablets to be placed vertically, more space saving;
- Adopt high quality silent switch button to give quiet clicking and reduce disturbanc;
- Up to10 meters wireless range.
Use Steps
Use steps of the wireless 2.4G mouse:
- Open the mouse battery cover and put in AA batteries;
- Toggle the bottom switch and the mouse tail light is on;
- Insert the receiver into the computer and play.
Use steps of the wireless 2.4G keyboard:
- Open the keyboard battery cover and put in AAA batteries;
- Toggle the bottom switch and the keyboard tail light is on;
- Insert the receiver into the computer and play.
Frequently Asked Questions
Fault
|
Solution
---|---
Tail light does not work| Check whether the positive and negative poles of the
battery are reversed
Cursor delay| Check whether the mouse battery is workable or replace it with a
new battery
Mouse or keyboard does not work| Unplug the receiver again, or plug in another
USB hole and reconnect
The keyboard indicator light is not on| Check whether the positive and
negative poles of the battery are reversed
Keyboard indicator flashes| Check whether the keyboard battery is powered.
Replace the battery with a new one
Specification
| Wireless Technology | RF 2.4 GHz |
|---|---|
| Wireless Range | About 10M |
| Receiver | Nano receiver |
Keyboard:
| Key Structure | Membrane |
|---|---|
| Keys Qty | 111 |
| Multimedia Keys Qty | 12 |
| Switch Keys Qty | 6 |
| Current | 10mA |
| Battery | 1 AAA Batteries |
| Peripheral Holder | Depth *11.5mm |
| Max Size Support | Width 276mm |
| Dimension | 433.8(L) X 142(W) x 19.3(H) mm |
Mouse:
| Sensor | Optical Sensor |
|---|---|
| Resolution | 800 – 1200 – 1600 DPI |
| Switch | Silent Switch |
| Button Qty | 6 (left,right,scroll,DPI switch,forward,back) |
| Battery | 1 AA Batteries |
| Current | 25mA |
| Dimension | 103(L) X 66(W) X 36(H) mm |
Box Includes
Wireless Keyboard
Wireless Mouse
User Manual
System Requirement
System requirement: Windows 10/8/7Nista/XP, Mac OS X 10.4 or later, Linux
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>