axis DVR2 Dual Camera HD Dash Cam with GPS Instruction Manual

axis DVR2 Dual Camera HD Dash Cam with GPS

SPECIFICATIONS

PREFACE

This advanced DVR system has 3 exciting features:

1. Built-in double lens to simultaneously capture two images at front and back.

2. Newly added GPS module can record the whole driving route.
   Using specialized software, you can play the video on a computer and at the same time connect to Google Maps. Allowing you to trace the travel route of the vehicle.

3. Built-in gravity G-Sensor can record gravity sensing information.
   Using specialized software, you can see the video on a computer and at the same time note the gravity sensing data to trace impacts of accident or other abnormal circumstances.

To maximize the performance of this recorder, please read this instruction manual carefully before use.
(Design and specifications are subject to change without prior notice)

FEATURES

• Dual Cameras
• GPS Logging
• G-Sensor detects crashes/ sudden changes in force
• HD 720p Resolution (front), 480p (rear)
• 2.7” Inch LCD
• 120° Wide Angle Lens (Front Camera)
• 140° Wide Angle Lens (Back Camera)
• Cycled Recording
• Seamless Continuous Recording
• Digital Video Camera/Digital Voice Recorder/Digital Still Camera
• Built-In Lithium Battery

PRODUCT STRUCTURE

Beginning to use DVR recorder

a) Battery Charging
There are two methods for battery charging:

1. Using the USB cable to connect the DVR to a computer.
2. Using the vehicle power socket.

During charging, using the supplied cigarette power lead, the indicator glows blue.
When charging is complete, the indicator automatically extinguishes. The whole charging process takes about 4 hours.
b) Insert a memory card
Carefully insert Micro SD memory card into the slot, until card clicks into position
To remove the card, push down the SD card. The card will pop up and can be removed from unit.

Notice:
When using a  memory card in the unit for the  first time, please format the memory card to be compatible with the machine. Use the unit or attached tool software ( ) to format the memory card (formatting the memory card by computer is not supported). Formatting will permanently delete all data on the memory card, including any protected images. Therefore, before formatting, please back up important data. If you can’t use the machine to format the memory card format, please use attached software ( ) on a computer.

c) Adjust the lens
The front lens of this machine can be adjusted 20 degrees up and down.

d) Turn on and off
Turn on: Press power button once until ON indicator lights up.
Turn off: Press power button once more until ON indicator is no longer illuminated.
Notice: When battery level is low. the OVR will prompt automatic off.

Basic Operations

a) Change operating mode
This machine has two operating modes: Pickup an

b) Setup menu
Press MENU button to enter MENU page.
Now the “Menu setting” is in blue background.

In the menu setting page, click left and right keys to select the required fields.
Click “OK” button to accept the settings.
Press the MENU key to exit the menu.

(i) System setting: Set system in framing preview mode.
Video mode: Double lens / front lens / back lens.
Time setting: Press left and right keys for time adjustment.
Press OK key to confirm and exit.
Formatting: Press the OK key to enter and select Yes/No.
Video format: NTSC/PAL setting.
Beep: On/Off.
Recording: On/Off.
Language: English / German I French / Spanish / Italian / Portuguese I
Traditional Chinese / Simplified Chinese/ Japanese.
Screen preset: On/Off.
Automatic video protection sensitivity: Low / general / high /automatically turn off video protection function (This function sets gravity sensor to start up automatic video recording sensitivity).
Frequency: 50HZ / 60HZ.

c) How to record
(i) Start / Stop recording:
In the recording mode, press OK key to start recording, then press OK key again to stop recording. When the recorder is on or memory card is inserted, it will automatically start recording.

(ii) Locking Files:
In recording mode, press the right arrow key to lock a current recording. This will prevent that file from being overwritten by the unit.
Follow the instructions under Section 4 – Computer access to the recorded file Point 11 (page 10), to unlock the file.

(iii) Audio Volume: During the video recording process, press left key to mute audio of the video.

d) Video playback and file management
Press MODE key to enter playback mode and now the screen shows playback picture of the last video file.

(i) Video playback
Video playback: Press left and right buttons to select audio and video files for play.
Press OK to play and pause the video file.

Computer access to the recorded file

This DVR device does not support USB protocol. Computer access to the recorded file of this machine can be done by a device supporting TF card (such as a card reader).

Notice:
(1) For easy use and to avoid software damage, it is recommended that a backup be taken.
(2) The computer operating system must be Windows 2000 / XP Vista / Windows 7, Windows 8

When inserting a memory card and formatting it for the first time, a specialized software tool will be automatically generated ( ) in the memory card.
Computer access to the file of the machine must be done via this tool.

(i) Using the software:

1. Use card reader to read video information on the SD card.
   In SD card disk under “my computer”, the user can see three files: ap.bin, Default_Folder.ini and

2. Run

3. Open the player to play video documents.
   Click to open the player.
   
   Select the SD Card disk path, then click the “apply” to load and automatically play the document in the card.
   Clicking the ActiveX can control playing state: slow turning / stop/ play (pause)/ fast turning. (from left to right).

4. Select double lens channel:
   Clicking the ActiveX can select double lens channel of video playing: double lens / front lens / back lens.

5. Video on file:
   Select video file for save and click and click to pop up saving file path picture. After selection, click “sure” to save the selected file.

6. Photo on file:
   Select image photo for save and click to pop up saving file path picture.
   After selecting the path, click “save”.

7. Delete document:
   Select the video file not needed and click D and click “sure/ cancel” options will appear. Select “Sure” to delete the selected video file.

8. Kit:
   Kit can proceed as follows: SD card formatting/upload software to the SD card / SD card speed test / map selection and user password setting.
   Click to enter the kit.
   

9. Google map:
   Click and the computer will connect to Google Maps via the Internet and show travel path. You can then trace the path of the vehicle.

10. Gravity Sensor:
    Click to watch the video on the computer and at the same time read and display the gravity sensing data, trace accidents and any abnormal events when driving.

11. Other operations:
    Click respectively from left to right. The following operations can be performed: repair film / unlock protection / choose to display size.

Reset unit

When the unit functions abnormally or freezes, press the reset button and then
restart the unit. Now the original factory settings are restored.

Product features

• Dual Lens: The front lens has a viewing angle of 120° that can be adjusted up and down 20°. The back lens has a viewing angle of 140°. This perfect modular design is more convenient for various angles & high resolution video recording.
• Built-in 1/4 inch low-noise and high-quality photographic element that can capture ultra clear pictures in dark conditions.
• Built-in lithium battery with charging and recording functions.
• Built-in microphone/speaker.
• Supports up to 32GB Micro SD Card.
• Automatic recording function when the vehicle is powered on.
• A delayed start function to prevent transient pulse currents causing damage upon start-up.
• GPS scanning and positioning.
• G-sensor.

Technical Specifications

140°
Optional Languages| English /German/ French / Spanish /Italian/ Portuguese/ Traditional Chinese / Simplified Chinese/ Japanese
Video format| AVI
SD memory card slot| Up to 32GB Micro SO (not included)
Microphone / speaker| Built-in
Television output| NTSC/PAL
TV output and DC access| 5V 500MA
Battery| Built-in lithium polymer battery
System requirement| Windows 2000/XPVista/Windows ?/Windows 8

Accessory List

1. Suction Bracket
2. 12/24V Car Charger
3. GPS Antenna
4. Instruction Manual

WARRANTY

Congratulations on your purchase of a quality Mobile Safety System! You’re joining thousands of satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is quickly rectified to your satisfaction. Please familiarize yourself with the following simple conditions of our warranty.
This warranty covers faults through component failure or failure of the product to operate in accordance with published specifications. Product failure as a result of unreasonable environmental conditions, accident, misuse, improper installation, unauthorised repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product or any form of consequential; loss.

CONSUMER WARRANTY
This product is warranted by AudioXtra International Pty Ltd to be free from defects in materials and workmanship under NORMAL USE for a period of TWENT FOUR MONTHS from the date of purchase. Battery warranty is 112 months from purchase.
WITHIN 30 DA VS OF PURCHASE DATE: Please return the unit for replacement to our National Service Centre or the Retailer from where you made the purchase. All accessories must be included. Proof of purchase date must accompany the products.
AFTER 30 DAYS OF PURCHASE DATE: Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorised centre concerned with this repair. This proof should take the form of either:

a) The warranty card accompanying this product, stamped and dated by the dealer.
b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model number and serial number.

COMMERCIAL WARRANTY: A product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at an extreme level.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replace if the goods fail to be of acceptable quality and the failure does not amount to a major failure

Please complete details below in the event of warranty service being required.
Purchaser’s Name: __
Purchaser’s Address: ____
Model Number: DVR2  Serial Number:
Dealer Name: Date of Purchase:
_Dealer Address:___
Invoice/Sales Docket no:_____
General Hints: To expedite service and prompt return of the equipment please:
a) Clearly describe the fault in detail c) Include your return address
b) Safety and security pack the unit for transport d) Provide proof of purchase date as outlined above

National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148Australia
Telephone: (02) 8841 9000 Fax: (02) 9636 1204 email: services@audioxtra.com.au

www.audioxtra.com.au

Documents / Resources

| axis DVR2 Dual Camera HD Dash Cam with GPS [pdf] Instruction Manual
DVR2 Dual Camera HD Dash Cam with GPS
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>