MQ WHITEMAN DSGPULW Honda Gx35sat Gasoline Engine Owner’s Manual
- September 2, 2024
- MQ WHITEMAN
Table of Contents
MQ WHITEMAN DSGPULW Honda Gx35sat Gasoline Engine
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions.
NOTICE
- The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed.
Sample parts list
NO. Column
Unique Symbols
- All items with same unique symbol
- (@, #, +, %, or >) in the number column belong to the same assembly or kit, which is indicated by a note in the “Remarks” column.
Duplicate item Numbers
- Duplicate numbers indicate multiple part numbers, which are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine.
NOTICE
- When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order.
Part No. Column
- Numbers Used — Part numbers can be indicated by a number, a blank entry, or TBD.
- TBD (To Be Determined) is generally used to show a part that has not been assigned a formal part number at the time of publication.
- A blank entry generally indicates that the item is not sold separately or is not sold by Multiquip. Other entries will be clarified in the “Remarks” Column.
QTY. Column
- Numbers Used — Item quantity can be indicated by a number, a blank entry, or A/R.
- A/R (As Required) is generally used for hoses or other parts that are sold in bulk and cut to length.
- A blank entry generally indicates that the item is not sold separately. Other entries will be clarified in the “Remarks” Column.
Remarks Column
- Some of the most common notes found in the “Remarks” Column are listed below. Other additional notes needed to describe the item can also be shown.
Assembly/Kit
- All items on the parts list with the same unique symbol will be included when this item is purchased.
Indicated by:
- “INCLUDES ITEMS W/(unique symbol)”
Serial Number Break
- Used to list an effective serial number range where a particular part is used.
Indicated by:
- “S/N XXXXX AND BELOW”
- “S/N XXXX AND ABOVE”
- “S/N XXXX TO S/N XXX”
Specific model Number Use — Indicates that the part is used only with the specific model number or model number variant listed. It can also be used to show a part is NOT used on a specific model or model number variant.
Indicated by:
- “XXXXX ONLY”
- “NOT USED ON XXXX”
“Make/Obtain locally”
- Indicates that the part can be purchased at any hardware shop or made out of available items. Examples include battery cables, shims, and certain washers and nuts.
“Not Sold Separately”
- Indicates that an item cannot be purchased as a separate item and is either part of an assembly/kit that can be purchased, or is not available for sale through Multiquip.
SUGGESTED SPARE PARTS
DSGPULW DUOSCREED WITH HONDA GX35SAT GASOLINE ENGINE
1 to 3 units
Qty. P/N Description
- 2 ………..BF2648………………HANDLE GRIP
- 1…………BF2647………………THROTTLE GRIP
- 2…………BF2645LW………….THROTTLE CABLE
- 1…………BF2621LW………….FLEXIBLE SHAFT
- 1…………BF2609N……………ECCENTRIC COVER
- 3…………BF2607………………COMPRESSION SPRING
- 1…………BF2605LW………….ALUMINUM CLAMPING STRIP
- 3…………BF0176………………WASHER
- 3…………BF2606………………WING BOLT
- 1…………BF2643………………STOP SWITCH
- 3…………BF0325………………WING BOLT M6X12
- 3…………31915Z0H003……..SPARK PLUG, NGK
- 3…………17211Z0Z000……..ELEMENT AIR
- 1…………15600ZM3003…….CAP, OIL FILLER
- 1…………28400Z0Z003……..RECOIL STARTER ASSY.
- 3…………17672ZM3003 ……FILTER, FUEL
- 1…………17620ZM3043…….CAP ASSY., FUEL TANK
- 1…………28462ZM3003…….ROPE, RECOIL STARTER
NOTICE
- Part numbers on this Suggested Spare Parts list may supersede/replace the part numbers shown in the following parts lists.
NAMEPLATE AND DECALS
NO. PART NO. PART NAME QTY. REMARKS
- DCL121 DECAL, PRESSURE HOSE 1
- DCL122 DECAL, SAFETY 1
- PLATE, SERIAL NO……………………………………..1……………..CONTACT MQ PARTS DEPT.
- W/MODEL AND S/N
- DCL140 DECAL, ALIGNMENT ARROWS 2
- DCL141 DECAL, ECCENTRIC WT. CHART 1
- BF260002 DECAL, DO NOT LIFT (HOOK) 1
- DCLDS-SERIES KIT, DECAL…………………………………………………1……………..INCLUDES ITEMS W/#
MAIN ASSY
NOTES
- OLD STYLE CENTRIFUGAL HOUSING ASSEMBLY NO LONGER AVAILABLE. IF REPLACEMENT OF ITEM 5A IS REQUIRED, ORDER NEW STYLE HOUSING ASSEMBLY, ITEM 86.
NO. PART NO. PART NAME QTY. REMARKS
- 1 BF2648 HANDLE GRIP 2
- 2 BF2647 THROTTLE HANDLE 1
- 3 BF2633LW UPPER OPERATING HANDLE 1
- 4 2640A35 ENGINE HONDA GX-35SAT 1
- 5 CENTRIFUGAL CLUTCH HOUSING CP………..1……………..NO LONGER AVAILABLE
- S/N 0185 AND BELOW
- SEE NOTE ON DRAWING
- INCLUDES ITEM W/$
- 5A$ CENTRIFUGAL CLUTCH HOUSING……………..1……………..NO LONGER AVAILABLE
- S/N 0185 AND BELOW
- SEE NOTE ON DRAWING
- BF0201 RETAINING RING 17 X 1 MM ………………………1……………..S/N 0185 AND BELOW
- IN CENTRIFUGAL HOUSING
- BF2642C BEARING IN CENTRIFUGAL HOUSING………..1……………..S/N 0185 AND BELOW
- BF0205 RETAINING RING (BIG)……………………………….1……………..S/N 0185 AND BELOW
- BF2642 CENTRIFUGAL DRUM…………………………………1……………..S/N 0185 AND BELOW
- BF2645LW INNER & OUTER CABLE, 87 CMS. 1
- BF2626 CENTRIFUGAL HOUSING CLAMP 1
- BF2625LW RUBBER HOSE WITH CONNECTORS 1
- BF2621LW FLEXIBLE SHAFT 1
- BF0178 SPRING WASHER M6 TYPE B 4
- BF0165 SOCKET HEAD BOLT M6 X 25 4
- BF2632LW LOWER OPERATING HANDLE 1
- BF0101 SELF LOCKING NUT M8 3
- BF0155 FLAT WASHER M8 8
- BF2611 ECCENTRIC HOUSING 1
- BF1100000008 COUPLING DRIVE PIN 1
- BF2619 BEARING (SMALL) 1
- BF2612 ECCENTRIC SHAFT 1
- BF2314 BEARING (BIG) 1
- BF0278 TAP BOLT M8 X 30………………………………………4……………..REPLACES P/N BF0125
- BF0201 RETAINING RING 17 X 1MM 1
- BF0213 TOOTH WASHER M8 4
- BF2604LW ECCENTRIC ASSEMBLY PLATE 1
- BF2610LW STRIP & NUTS FOR ALUMINUM CLAMP 1
- BF2608N SUPPORT BLOCK 2
- BF0325 WING BOLT M6 X12 3
- BF2609N ECCENTRIC COVER 1
- BF2611KOMPL ECCENTRIC HOUSING COMPLETE…………….1……………..INCLUDES ITEMS W/%
- BF0129 TAP BOLT M8 X 40 3
- BF2614 ECCENTRIC HINGE BUSHING 1
- BF0177 NUT M12 (FINE) 1
- BF2613 ECCENTRIC CLAMPING BUSH 1
NOTES
- OLD STYLE CENTRIFUGAL HOUSING ASSEMBLY NO LONGER AVAILABLE. IF REPLACEMENT OF ITEM 5A IS REQUIRED, ORDER NEW STYLE HOUSING ASSEMBLY, ITEM 86.
NO. PART NO. PART NAME QTY. REMARKS
- 42 BF0175 RETAINING RING M12 1
- 43 BF2615A ECCENTRIC PLATE (SMALL) 1
- 44 BF2615B ECCENTRIC PLATE (BIG) 1
- 45 BF0207 COUNTERSUNK HEADSCREW 8.8 M8X25 4
- 46 BF2617 PLASTIC PROTECTION CAP M12 3
- 47 BF2607 COMP. SPRING FOR CLAMPING STRIP 3
- 48 BF2605LW ALUMINUM CLAMPING STRIP 1
- 49 BF0176 WASHER M12X6 3
- 50 BF2606 WING BOLT 3
- 51 BF0285 TAP BOLT M8X12 3
- 52 BF0212 INTERNAL TOOTHING RING M8 8
- 53 BF0056 RUBBER BUFFER 30X30 M8 4
- 54 BF0124 TAP BOLT M8X10 4
- 56 BF2643A GROUND WIRE FOR STOP SWITCH 1
- 57 BF2643 STOP SWITCH……………………………………………1……………..INCLUDES ITEMS W/#
- 58# BF2658 START-STOP DECAL 1
- 59 BF0283 CARRIAGE BOLT M8X50 2
- 60 BF0089 SELF LOCKING FLANGE NUT M6 2
- 63 BF2635 LOWER ALUMINUM CLAMP 2
- 65 BF0181 TAP BOLT M6X30………………………………………..1……………..REPLACES P/N BF0258
- 66 BF0100 SELF LOCKING NUT 1
- 67 BF2635A UPPER ALUMINUM CLAMP 2
- 68 BF0284 SOCKET HEAD BOLT M6X40 2
- 69 BF2636 CLAMP FOR HEIGHT ADJUSTMENT 2
- 71 BF0167 SCREW M5X16…………………………………………..1……………..REPLACES P/N BF0261
- 72 BF0099 SELF LOCKING NUT M5 1
- 73 BF2637LW SUPPORTING LEG 1
- 74 BF2644 GAS THROTTLE ADJUSTMENT BOLT 1
- 75 BF2639 CLAMP FOR SUPPORTING LEG 1
- 76 BF2634 RUBBER PROTECT CAP FOR SUPPORT LEG 1
- 78 BF2321H SWITCH BRACKET 1
- 79 260075LW LIFTING HANDLE STEEL 1
- 80 BF0269 SOCKET HEAD BOLT M5 X12 1
- 81 BF0206 SQUARE NUTS M8 8
- 82 BF26061 SPRING CLIP, COVER PLATE 1
- 83@ BF0217 RETAINING RING………………………………………..1……………..S/N 0186 AND ABOVE
- 84@ BF2653 COUPLING DRIVE PIN………………………………..1……………..S/N 0186 AND ABOVE
- 85@ BF2641LOS CENTRIFUGAL HOUSING W/BEARING………..1……………..S/N 0186 AND ABOVE
- 86 BF2641 CENTRIFUGAL HOUSING COMPLETE…………1……………..INCLUDES ITEMS W/@
- S/N 0186 AND ABOVE
- 87@ BF2652 CENTRIFUGAL DRUM…………………………………1……………..S/N 0186 AND ABOVE
- 88@ BF2627 BOLT M12 X 16…………………………………………..1……………..S/N 0186 AND ABOVE
ENGINE SERVICE PARTS
NO. PART NO. PART NAME QTY. REMARKS
- 17672ZM3003 FILTER, FUEL 1
- 31915Z0H003 SPARK PLUG, NGK 1
- 14400Z0Z003 BELT, TIMING 76ZU7 G-300 1
- 28462ZM3003 ROPE, RECOIL STARTER #3.5X40” 1
- 28461ZM3003 KNOB, RECOIL STARTER 1
- 17211Z0Z000 ELEMENT, AIR CLEANER 1
- 17620ZM3043 CAP ASSY., FUEL TANK 1
FAQ
- Q: Are part numbers subject to change?
- A: Yes, part numbers are subject to change without notice. It is recommended to check the latest revision of the manual or visit the manufacturer’s website for updated part information.
- Q: What does A/R mean in the QTY. column?
- A: A/R stands for “As Required.” It is commonly used for parts like hoses that are sold in bulk and cut to length based on individual requirements.
- Q: How can I find the latest revision of the publication?
- A: Visit the manufacturer’s website at www.multiquip.com to find the latest revision of the publication or associated operation manual.
More Informations
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING
UNITED STATES
- Multiquip Inc.
- (310) 537- 3700
- 6141 Katella Avenue Suite 200 Cypress, CA 90630
- E-MAIL: mq@multiquip.com
- WEBSITE: www.multiquip.com
CANADA
- Multiquip
- 450-625-2244
- 4110 Industriel Boul. Laval, Quebec, Canada H7L 6V3
- E-MAIL: infocanada@multiquip.com
KINGDOM
- Multiquip (UK) Limited Head Office
- 0161 339 2223
- Unit 2, Northpoint Industrial Estate, Globe Lane, Dukinfield, Cheshire SK16 4UJ
- E-MAIL: sales@multiquip.co.uk
© COPYRIGHT 2023, MULTIQUIP INC.
Multiquip Inc , the MQ logo are registered trademarks of Multiquip Inc. and
may not be used, reproduced, or altered without written permission. All other
trademarks are the property of their respective owners and used with
permission.
This manual MUST accompany the equipment at all times. This manual is
considered a permanent part of the equipment and should remain with the unit
if resold.
The information and specifications included in this publication were in effect
at the time of approval for printing. Illustrations, descriptions, references
and technical data contained in this manual are for guidance only and may not
be considered as binding. Multiquip Inc. reserves the right to discontinue or
change specifi cations, design or the information published in this
publication at any time without notice and without incurring any obligations.
Flextool
- 1956 Dandenong Road, Clayton VIC 3168, Australia
- Phone (AUS): 1300 353 986
- flextool.com.au
- ABN 80 069 961 968
This manual summarises our best knowledge of the product based on the information available at the time of publication. You should read this manual carefully and consider the information in the context of how the product will be used. Our responsibility for products sold is subject to our standard terms and conditions of sale.
DISCLAIMER
Any advice, recommendation, information, assistance or service provided by us in this manual is given in good faith and is believed by us to be appropriate and reliable. However, any advice, recommendation, information, assistance or service provided by us is provided without liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred upon any person or the liabilities imposed upon us by any condition or warranty implied by Commonwealth, State or Territory Act or ordinance void or prohibiting such exclusion limitation or modification. The product can be expected to perform as indicated in this manual so long as operation and operational procedures of the individual products are followed as recommended in this manual.
Design and technical specifications may be subject to changes.
© This publication is copyright. All rights are reserved. Flextool is a registered trademark of Parchem Construction Supplies Pty Ltd. Multiquip, MQ and Whiteman are registered trademarks of Multiquip Inc.
References
- Concrete Equipment and Tools - From Site Preparation to Surface Preparation | Flextool
- Multiquip Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>