REVOLT TG1011 Slydz Vapor Racer User Manual
- June 5, 2024
- REVOLT
Table of Contents
REVOLT TG1011 Slydz Vapor Racer
Important safety information
Thank you for buying this REVOLT item. To ensure that you operate the vehicle cmectly, please read these instructions carefully before first use and store them in a safe place for future reference.
Safety information
-
Keep the smaller-sized accesscries out of the reach of children.
-
Do not store batteries in a hot environment (e.g. near open flames or a heating device).
-
Children must be supervised by an adult when operating the vehicle. The vehicle should always remain wilhin Ille line of sight of the driver (or instructor).
-
Do not recharge non-rechargeable batteries. When installing or changing the batteries. ensure that they are ccnnecled in the ccrrect polarity. Do not mix old and new batteries or different types of batteries.
-
Do not short circuit the battery terminals.
-
If you do not plan to use the vehicle for at least 10 days, discharge the battery to 40%-50% (i.e. the battery is fully charged, drive the vehicle for half of the total driving time). This helps to prolong !he lifespan of the battery.
You must ooly use the charging cable provided. Disconnect the charging cable from the vehicle before dleaning. Regularty inspect the charging cable’s wires. plug socket, outer casing and other accessories to ensure they are not damaged. If there are any signs of damage, disccntinue use immediately until repaired. -
After use, ensure that the vehicle and remote control are switched off and remove the batteries in the remote coolrol. ‘The packaging and this manual ccntain important information and should be kept in a safe place for future reference.
Repair and maintenance
- Clean the product regularty with a clean, soft cloth.
- Avoid exposing the product to direct sunlight or heat.
- Do not submerge the product in water. as this may damage the electrical ccmponents.
About this product
Specifications
| Weight | 510g |
|---|
Dimensions
Remote control range
| 19.2×18.5×7.6cm
15-20m
Charging time| about 140 mins
Operating time| 20-30 mins
Operating temperature| o to 40 ·c
Battery| 3.7V 900mAh recharget>le battery (included)
Remote control
| Operating frequency | 2.4 GHz |
|---|---|
| Operating temperature | o to 40 ·c |
| Battery Requirements | 2xAA 1.5V batteries (not included) |
OPERATING INSTRUCTIONS
ADDING WATER TO THE TANK
CONTENTS
- 1 X Slydz Vapor Recer
- 1 x Remote Control
- Water Bottle (For adding water to SLYDZ VAPOR RACER)
CHARGING THE BATTERY
Align the charging head of lhe USB charging cable with the charging port of the battery and push together.
NOTE: Charging input 5V, 500mA. (input current will directly affect charging time)The indicator light will stay ccnstant when the battery is charging and turn off when the battery is fully charged. A full charge takes approximately 140 min
Warning!
- This product must be assembled and used under the direct supervision of an adult.
- This product contains small components that present a choking hazard if swallowed; this product is not suitable for children under 8 years of age.
- Rechargeable batteries are only to be charged under adult supervision.
- Regular examination of USB charger for any damage to their cord, plug, enclosure and other parts ,and they must not be used until the damage has been repaired.
FCC WARNING
Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not / installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
‘This device complies with FCC radiation exposure limits set forth for general population(uncontrolled exposure).This device must not be collocated or operating in conjunction with any other antenna or
transmitter.” Decoration of Conformity Inserts: “Hereby, GuangDong Syma model drone Industrial co, ltd, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.” A copy of the full DoC is attached. G
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>