wave 10FT Inflatable Stand Up Paddle Board User Manual
- June 5, 2024
- wave
Table of Contents
wave 10FT Inflatable Stand Up Paddle Board
WARNING: PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
-
IMPORTANT WARNING
Warning: A Personal Flotation Device (PFD) is required for each user!
Warning: Do not dive or jump ! Avertissement:Ne pas plonger ou sauter!
Warning: Keep away from fire!
Warning: Do not leave product exposed under sunlight directly because it will shorten the using life of product!
Warning: Beware of offshore winds and currents. Do not use in high wind, open water!
Warning: Do not use around sharp objects! -
INSTALLATION AND INFLATION
-
DEFLATING AND STORAGE
Clean your SUP after a trip to prevent damage from sand, saltwater or sun exposure!
-
INSTRUCTION OF VALVE** IF THE VALVE IS BROKEN OR LEAKY, FOLLOW THE NEXT STEPS TO REPLACE THE VALVE.
** -
The Repair Kit includes glue and PVC sheet. The Repair Kit can be used only if the leakage is 10 mm below.
WARRANTY
Product Warranty
Wave products have been inspected with no evident defects prior to leaving the factory. Wave warrants this product against defects in material and workmanship for a period of time, 1 year for the pump and 6 months for the liner.unless local law has special requirement. Warranty for this product begins on the date of purchase and Wave requires presentation of the original proof to purchase to confirm the date. During the warranty period, Wave will either repair or replace, at its discretion, any defective products. Replacement products or repaired parts will be warranted for the unexpired portion of the original warranty. Shipping cost policy The return of defect parts to the authorized service centre is at the cost of the owner. On warranty period, the return is at the cost of service center. Warranty policy This limited warranty does not apply to any defect resulting from negligence, accident, misuse, or other reason beyond Wave’s control, included but not limited to: normal wear and tear, negligence or failure to follow the product instructions, improper or inadequate maintenance; connection to improper power supply; chemical water damage, loss of pool water, unauthorized product modification or repair; use for commercial purpose; fire, lightning, flood or other external causes. This warranty is valid only in the country of purchase in such countries where Wave sells and services the same model with identical technical specifications. Warranty service outside the country of purchase is limited to the terms and conditions of the corresponding warranty in the country of service. Where the cost of repairs or replacement is not covered by this warranty, Wave will advise the owners and the cost shall be charged to the owner. This warranty only applies to the original purchaser and terminates upon any transfer of ownership. All repairs of which warranty claims are made must be pre-authorized by a Wave service centre. All the authorized selling dealer is responsible for all in-field service work carried out on your Wave product. Wave will not be liable for results of cost of workmanship from unauthorized service person . Warranty registration To validate your warranty, please register your product on our website Wave: www.wavespas.com It is essential that all informations including customer name, date of purchase, serial number, sup model are provided. Without this information the warranty will be invalid.
Repair Instruction
- Wipe the hull with soap and water to find holes in the SUP. The soap will bubble over the hole.
- Clean the area around the hole with water or alcohol.
- Use a pencil to sketch out the outline of the patch.
- Cut a patch of a suitable size.
- Apply glue evenly to the damaged area and patch and then press and hold the patch to the damaged area.
- Leave the SUP for at least 24 hours or more before inflating it.