Winner Wave POCKET-BC-1 EZ Cast Pocket User Manual
- June 1, 2024
- Winner Wave
Table of Contents
Winner Wave POCKET-BC-1 EZ Cast Pocket
About EZCast Pocket
Transmitter (H-1/ C-1 / BC-1)
Easily mirror whatever shows on your laptop or mobile screen, ideal for video- watching, game-play, and idea sharing.
- C-1/ BC-1 model with the Type-C connector, H-1 model with the HDMI connector.
- BC-1 model is chargeable via Type-C port.
Display the contents passed from your transmitter on the big screen like HDTV
or projector screen.
How to mirror
-
Install the receiver
Use the Type C connector to connect EZCast Receiver to the HDMI port on TV, and power on by an independent power SV/lA adapter. -
Plug and play
Plug EZCast Transmitter to Type C or HDMI port on laptop or mobile.
Wait a few seconds until the flashing light on transmitter stops, and it will start mirroring automatically.
When using the Transmitter H-1 (HDMI connector), using the Type C connector connect to an independent power SV /lA adapter.
-
Stop and restart mirroring
Press the mirror/ pair button on the transmitter to stop mirroring or restart mirroring.
Note : EZCast Transmitter support mirroring for all laptops including Windows and MacOS, and Android mobiles with DP Alt output. To reset to default, press the reset button for 5s.
OTA Upgrade
-
Download EZCast App
(1) Plug the receiver to the monitor, and using the Type C connector to provide power.
(2) Scan the QRCode with a computer or mobile phone, or go to www.ezcast. com/app to download the EZCast app. -
Enabling receiver SSID and PSK and connect to it
(1) Check the monitor for the displayed SSID and PSK of the receiver. If it is not displayed, press the reset button on the receiver for 2 seconds to turn on the pairing mode for display.
(2) Connect the mobile’s or computer’s Wi-Fi to the receiver.
(3) Launch EZCast, into and select the SSID of the receiver and connect it.
(4) Into to the settings page , select Internet, and connect the receiver to the Internet.
(5) Check the icon on the monitor, verify the receiver is connected to the network.
-
Using the EZCast App to Upgrade
(1) Ensure mobile or computer is connect to same Wi-Fi as the Receiver.
(2) Launch EZCast, choose , and confirm it’s link to the receiver.
(3) Automatically checks the current version status. If t he most recent version is available, agree to update to complete the system upgrade.
Product informations
Transmitter
- Antenna: 1TlR (on board)
- Wi-Fi: 5Ghz
- Chipset: 8360D
- Interface: HDMI or Type-C
Receiver
- Antenna: 1TlR (on board)
- Wi-Fi: SGhz
- Chipset: 8268D
- Interface: H DMI
Note: 5G band (W52) indoor use only.
Transmitting
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could
void the user’s authority to operate the equipment. This equipment has been
tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, ma1y cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
SAR statement
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The SAR limit set by the FCC is 1.6W /Kg.
For body-worn operation, this device has been tested and meets the FCC RF
exposure guidelines for use with an accessory that contains no metal and
positions the device a minimum of 0mm from the body. RF exposure compliance
with any body-worn accessory that contains metal was not tested and certified.
and use of such body-worn accessory should be avoided. Accessory available in
market and must be used to keep use distance 0mm from EUT to body-worn
operation.
Customer Support
Web1site : https://www.EZCast.com
Youliube: https://www.YouTube.com/EZCast