Aminalife a95224915b8b 30 Bathroom Vanity Installation Guide
- June 1, 2024
- Aminalife
Table of Contents
Aminalife a95224915b8b 30 Bathroom Vanity
Product Information
- Specifications
- Model: 30 Bathroom Vanity
- Tools Required: Not included Cam Lock Assembly Instructions included
- Sink Installation: Requires glue (not included)
- Recommended Assembly Surface: Clean soft surface
Product Usage Instructions
- Before Assembly
- Carefully check all packing material for loose parts.
- Separate, identify, and count all parts and hardware against the parts list.
- Do not tighten screws until assembly is complete.
- Assembly Steps
- Review the instruction manual thoroughly before starting assembly.
- Assemble on a clean soft surface to avoid damage to the product.
- Follow the Cam Lock Assembly Instructions provided in the manual.
- Connect the panels using the Cam Lock mechanism as described.
- Tighten the Cam Lock by turning it clockwise half a turn with a flat screwdriver.
- Sink Installation
- If applicable, install the sink on the cabinet using glue (not included).
- Allow the sink to stand for 24 hours for proper adhesion.
- Note that silicone glue is not included in the package due to safety regulations.
FAQs
- Q: What should I do if I encounter trouble during assembly?
- A: Contact the seller for assistance with any assembly difficulties or missing/damaged parts.
TOOLS REQUIRED
- The use of a power tool to assemble this product will invalidate any claim and damage this product making it unsafe!!!
- Please assemble on a clean soft surface to avoid damage.
IMPORTANT: PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY.
PLEASE DO NOT RETURN TO STORE
- STOP
- Please do not return this product to the retailer!! We can assist you in ANY way
- If you find that you have any trouble with assembly or missing or damaged parts please contact the seller.
Before Installation
Important – Please read these instructions fully before starting assembly
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items according to the PARTS LIST and/or HARDWARE LIST shown below. Check you have all the components and tools listed on the following pages. • We recommend that you assemble this product with the assistance of another person; this will make the assembly easier, and will help eliminate damage to the product or injury to persons during assembly.
- Please do not over-tighten screws or bolts until the assembly is completed.
- Keep children and animals away from the work area, small parts could choke if swallowed.
- Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased product correctly and efficiently.
Cam Lock Assembly Instructions
Detail View – CABINET
Part List
Part List – WF305075
Part List – WF305076 (if
applicable)
Hardware List
Hardware List – WF305075
INSTALLATION STEPS
HINGE ADJUSTMENTS
- 1 Sideways / Tilt adjustment
- Turn the screw clockwise to move the door further away from the side of the cabinet anticlockwise to move the door closer to the side of the cabinet
- 2 4 Height adjustment
- While supporting the weight of the door, turn the screws clockwise to move the door up anticlockwise to move the door down
- 3 Forward and back adjustment
- If the gap between the back of the door and the cabinet is too small, and the door may not close fully. Turn the screw clockwise to decrease the gap between the door and the cabinet anticlockwise to increase the gap between the door and the cabinet
- If the gap between the back of the door and the cabinet is too small, and the door may not close fully. Turn the screw clockwise to decrease the gap between the door and the cabinet anticlockwise to increase the gap between the door and the cabinet
If you have any questions, please feel free to contact us.
- Email: service@aminalife.com.
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. Compare with the parts list to be sure all parts are present. “DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>