Gude 40122 DL Impact Wrench Twin Hammer Instruction Manual

40122 DL Impact Wrench Twin Hammer
Instruction Manual

40122 DL Impact Wrench Twin Hammer

Please read the instructions carefully before starting the machine.

STARTING-UP THE MACHINE

DELIVERED ITEMS

Operation

Marking:

Product safety:

The product corresponds to the appropriate standards of the EU

Prohibitions:

General prohibition (in connection with any other icon)

Warning:

****|
---|---
Warning/Attention| Beware of the rotary tool!

Commands:

| |
---|---|---
Read the Operating Instructions before use|  Wear earphones and protective glasses!| Wear safety gloves!

Environment protection:

| | ****
---|---|---
Dispose of the waste professionally in order not to pollute the environment.| Packing cardboard material may be delivered to collecting centers for recycling.| Any damaged or disposed electric or electronic devices must be delivered to
appropriate collection centers.

Package:

Interseroh-Recycling

Technical data:

| | | |
---|---|---|---|---
Operating pressure| Connecting thread| Air consumption| Max. free- running revs| Weight

Supply includes (picture 1)

1. Compressed air connector
2. Control lever
3. Handle
4. Tool hold

Appliance

22000 PNEUMATIC ROD GRINDING MACHINE
Professional pneumatic rod grinding machine with a double embedded shaft, and rubbered handle for effortless work with minimum vibrations. Due to the foul air channel, there is no dust swirl on the workpiece! Safety switch against unintentional switching on.

Technical data

General safety instructions

Please read carefully these Operating Instructions.
Familiarise yourself with the control elements and appropriate appliance use. Keep the Operating Instructions for future reference.

Safe working
Keep the place of your work clean!
Mess in the place of your work may result in injuries.
Considering the environmental influences
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide appropriate lighting.
Do not use the appliance near flammable liquids or gases.
Keep other persons at a safe distance!
Do not let other persons, especially children, touch the appliance and the cable. Keep them at a sufficient distance from the place of your work.
Store the appliance properly!
An appliance that is not used should be stored in a dry, locked place out of reach of children.
Do not overload the appliance!
Work in the specified output limits.
Use the right appliance!
Do not use the appliance for purposes for which it has not been designed.
Look after your appliance!
Follow the maintenance regulations and instructions.
Check regularly the appliance cable and have it replaced by
an authorized professional if damaged.
Check regularly the extension cable and replace it if damaged. Keep the handles dry, with no oil and grease.
Be careful!
Pay attention to what you are doing. Use common sense when working. Do not use the appliance when you are tired.
WARNING!
Use of any other accessories may pose a risk of injury.
Your appliance should be repaired by an electrician only!
This appliance meets the appropriate safety provisions.
Repairs may only be executed by an electrician and original spare parts must be used, otherwise, the user may face a risk of injury.

Appliance-specific safety instructions

Safety notice! Failing to follow these instructions can cause an injury to you or other persons.

1. Read the following Operating Instructions for using the pneumatic appliance and follow the safety instructions for using the pneumatic appliance.

2. ALWAYS wear approved protective glasses, earphones, a respirator, and safety gloves!

3. Disconnect the appliance from the air supply if not used. NEVER replace any parts of the accessories or SERVICE them if the appliance is connected to the air supply.

4. Ensure that your hands could freely move while working on the appliance to be able to execute the work safely.

5. Use the appliance only at the speed for which it has been designed.

6. Properly maintain the appliance and follow all instructions for appliance lubrication and maintenance.

7. Do not damage the hoses and connecting pieces by carrying the appliance with its hose or by disconnecting the hose from the air supply by pulling. Prevent the hose
   from coming into contact with high temperatures, oil, and sharp edges. The hose should be replaced if damaged or worn out.

8. Use the appliance with allowable service pressure only.
   Higher pressure would shorten the service life of your appliance as a result of a higher load.

9. There can be sparks during the grinding process.

10. Do not use any damaged grinding material.

11. Do not needlessly use long pneumatic hoses to avoid tripping.

12. Never leave the pneumatic appliance unattended.

13. Never put the appliance near people or animals.

14. Never aim at people or animals with the air current.

15. Never put the pneumatic appliance near body holes – it can lead to injuries dangerous to life!

16. Injury by stone.

17. Attention! Parts breaking off!

Beware of the rotary tool!

Operation

Wear protective glasses! Wear earphones! Wear safety gloves!
Before everyday use, please empty the water from the compressor tank and blow the condensation from the air hose.
If the seal has not yet been applied on the pneumatic insertion wrap it with Teflon tape (picture2 and 3)

• Start the compressor.
• Fix the required grinding shank to the pneumatic grinder.
• Connect the pneumatic grinder with the pneumatic hose. Caution! Do not exceed the maximum operating pressure!
• Start working by pressing the Start button.

Maintenance and treatment

Trained persons are allowed to execute the maintenance works only.
Following the mentioned instructions for maintenance is a guarantee for a long service life and trouble-free operation of this high-quality product. Disconnect the appliance from the compressed air source at maintenance and treatment. For permanent faultless operation of your appliance it is necessary to ensure everyday cleaning and regular
lubricating. Use special pneumatic oil only.
You can choose from the following options:
Via mist lubricator
The complete maintenance unit contains a mist lubricator and is attached to the compressor.
Via lubricator on the piping
In the immediate vicinity of the appliance (at a distance of app. 50 cm) a lubricator is installed on the piping that supplies a sufficient volume of oil to the appliance.
Manually
If your equipment has no maintenance unit or lubricator on the piping you need to add 3 – 5 oil drops to the compressed air connector before each putting the pneumatic appliance into operation. If the pneumatic appliance is not used for several days you must add 5 – 10 oil drops to the compressed air connector before starting the appliance. Store the pneumatic tools/appliances in dry rooms only.
You need to remove the air hose and pour a large volume of pneumatic oil into the air intake every three months or when the bar grinding machine is used only occasionally. Reconnect

the air hose and let the bar grinding machine run for app. 30 seconds to enable compressor engine cleaning. Follow the lubricating instructions after cleaning.

Use as designated

The pneumatic straight grinder combined with suitable grinding material and following the technical specifications is ideal for grinding, bevelling, milling, and engraving.
This appliance must not be used for any works other than for which the appliance has been designed and that are specified in the Operating Instructions.
Any other use will be considered use in conflict with the designation. The manufacturer will not be liable for any consequential damage or injuries. Please be sure to know
that the appliance has not been designed for industrial purposes.

Warranty

A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences on the day of purchase of the device.
Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with an indication of the date of sale must be presented in case of claiming the warranty rights.
The warranty does not cover unprofessional use such as device overload, violent use, damage caused by third parties or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear.

Emergency Action

Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from more accidents and calm him/her down.
For the sake of an eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

Disposal

The disposal instructions are based on icons placed on the appliance or its package. The description of the meanings can be found in the “Marking“ section.
Transport package disposal
The package protects the appliance against damage during transport. Packing materials are usually chosen depending on their environmental friendliness and disposal method and can therefore be recycled. Returning the package to material circulation saves raw materials and reduces waste disposal costs. Parts of packages (e.g. foils, styropor®) can be
dangerous to children. Risk of suffocation! Keep parts of packages away from children and dispose of them as soon as possible.

Operator requirements

The operator must carefully read and understand the Operating Instructions before using the appliance.

Qualification
No special qualification is necessary for using the appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 16 years of age. An exception includes youngsters operating the appliance within their professional education to achieve
necessary skills under the trainer’s supervision.
Training
Using the appliance only requires appropriate instructions by a professional or reading the Operating Instructions. No special training is necessary.

Service

Any technical questions? Complaint? Do you need spare parts or an operation manual?
Go to our website www.guede.com and the section Service will help you quickly and without bureaucracy. Please, help us to help you. In order to identify your device in case of
a complaint, please indicate the serial number, order number, and year of manufacture. All information is available on the product label. To have all information always at hand, put them down.

Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail:support@ts.guede.com

Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below-mentioned appliances correspond – at the type of construction being launched – to the appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance is not discussed with us, the Declaration expires.

DL-Stabschleifer 22.000
Air Straight Grinder
40124  22000
Directives CE applicables

2014/35/EU
1935/2004/EC
2011/65/EU&2015/863/EU
2016/425/EU (PPE)
X 2006/42/EC
Annex IV
Name:
Address:
Notified Body
No:
Type Ex. Cert.-No.:| 97/68/EC_&2016/1628/EU
Emission No.:
2000/14/EC_2005/88/EC
2014/30/EU
 1907/2006/EC
2016/426/EU
 2014/29/EU
2015/1188/EU
2019/1784/EU
---|---

** Method of compliance assessment
Annex VI
Wolpertshausen, 07/12/2020**

Harmonized standards used
AN ISO 11148-9:2011
AfPS GS 2014:01 PAK
Guaranteed sound power level
LWA dB (A)
Measured sound power level
LWA dB (A)
Helmut Arnold
Managing Director
Joachim Bürkle
GÜDE GmbH & Co. KG, Birkichstraße 6, 74549 Wolpertshausen, Germany
Bevollmächtigt die technischen Unterlagen zusammenzustellen.
Authorized to compile the technical file

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>