SZELAM DS-6638 Digital Wall Clock User Manual
- June 15, 2024
- SZELAM
Table of Contents
SZELAM DS-6638 Digital Wall Clock
Model : DS-6638
The main features
- Three brightness levels can be adjusted
- Alarm function: Two sets of alarms with options for single/double weekends and daily alarms, with a snooze function.
- Daylight saving time.(DST)
- Two display modes: 1. Display time and day of the week only. 2. Display time, date, temperature in a loop, and day of the week.
The clock needs to be plugged into long time display
- Powered by DC5V: The clock keeps displaying long time.
- *Powered by 3AAA batteries save mode** : Only display for 10 seconds after lighting up by making a sound or tapping the clock. The volume of the alarm and the brightness of the alarm clock will be lowered by one level
Setting Instruction
- Time Setting
- Display Mode Setting: long press” ” to switch display mode,
- Display time and day of the week only.
- Display time, date, temperature in a loop, and day of the week.
- Temperature Setting: In the time mode, short press the “ ” button to switch the temperature unit Celsius/Fahrenheit.
- Brightness Adjustment: In the time mode, short press the “ “to select brightness adjustment, Available from L-01 to L-03.
- Night mode: 22:00 – 06:00 enter low brightness mode automatically.
- DST Setting: Press and hold the “ ” button in the time setting mode to turn on/off the Daylight Saving Time (DST) function.If DST is enabled, it will be displayed on the screen, otherwise, it will not be displayed.
Alarm Settings
-
Switch alarm clock: press to display icon and alarm state to display icon and alarm state.”
Press to set alarm OFF/ON, press setting the Alarm time for Alarm 1 and Alarm 2 -
When the alarm clock goes off, short-press any button to enter snooze mode, and the corresponding Alarm 1 /Alarm 2 symbol will flash. Snooze can be used up to 6 times, with each snooze time being 5 minutes.Long press any button to turn off the alarm and enter the next alarm state, and the corresponding Alarm 1 / Alarm 2 symbol will stop flashing.
Note: The “long press” mentioned above is a long press for three seconds, in five seconds no operation automatically confirms the exit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>