rizoma PT542 Porta Targa Fox Kit User Manual
- June 5, 2024
- rizoma
Table of Contents
rizoma PT542 Porta Targa Fox Kit
Specifications
- Product Name: Rizoma Porta targa License Plate
- Part Number: PT542
- Compatibility: Universal
- Difficulty Level: Simple
- Time of Assemblage: 20-25 minutes
Installation Steps
- Step 1 – Install Plate for Small License Plate:
- Securely attach the license plate holder with part number PT542.
- Step 2 – Install Plate for Medium/Large License Plate:
- Attach the plate suitable for medium/large license platesusing part number PT542.
- Step 3 – Install Universal License Plate:
- Install the universal license plate holder with part number PT542.
- Step 4 – Install Pin of Positioning:
- Securely place the positioning pin for proper alignment.
- Step 5 – Finalize License Plate Installation:
- Complete the installation of the license plate holder with part number PT542.
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.
Attention: This component comes assembled for shipping purposes only. Tighten
all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com)
-
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your safety Rizoma suggests to
always contact
your RIZOMA dealer.
To comply with the TÜV and European Norm in force, the installation of the
license plate must be carried out as the enclosed instructions.
Consult the website www.rizoma.com in license plate
support section click “MEDIA” to download the PDF document approval ABE.
Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components. Warning:Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others, also make sure that the temperature of the exhausts and the engine are similar to the ambient temperature. WARNING: TO CLEAN
YOUR LICENSE PLATE DON’T USE
DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN
DAMAGE OR SCRATCH YOUR LICENSE PLATE, BUT USE ONLY NEUTRAL
DETERGENT WITH COLD WATER.
INSTALL PLATE FOR MEDIUM
INSTALL UNIVERSAL
INSTALL UNIVERSAL LICENSE PLATE
INSTALL PIN OF POSITIONING
MONTAGGIO PORTA TARGA INSTALL LICENSE PLATE
INSTALL INDICATORS
INSERT WIRING
INSERT ORIGINAL
POSITION WIRING IN THE REAR CLOSURE
CONNECTIONS
INSERT LICENSE PLATE
INSTALL LICENSE PLATE
ADJUSTMENT REFLECTOR MEDIUM
ADJUSTMENT REFLECTOR SMALL LICENSE PLATE
Warnings
- RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
- The action depicted is performed by professionals under strictly controlled riding conditions.
- Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
- All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
- Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
- Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.
Some of our products may not be approved for road circulation in the countries where homologation is required. Thus RIZOMA® srl declines any responsibility for a different use of its products.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>