FORCE1 F1-MONARC-BLU Monarch Motion Drone User Manual

June 5, 2024
FORCE1

FORCE1RC.COMFORCE1 - logo1
USER MANUAL

FOR MORE INFORMATION
Visit us online at force1rc.com for product information, replacement parts, and flight tutorials.

IMPORTANT STATEMENT

Thank you for buying a Force1 drone. Please read this manual carefully before operating the drone. By reading this manual it is assumed you are accepting all content in this user manual when using this drone.

  1. Please operate in a safe manner. We undertake no liability for human injury or property dam- age caused by improper operation, as we have no control over the setup, use,  and operation of this drone.
  2. This drone is suitable for experienced RC drone users aged 14 years or above.
  3. The flying field must be legally approved by your local government. Please contact us if you have any questions about use, operation, technical support, repair, after-sale service, etc. Force1 does not assume any responsibility for any accidents caused by using non-genuine parts and accessories. Keep the packaging and user manual for future reference. Email us at [email protected] for questions, comments, or to request spare parts.

SAFETY PRECAUTIONS

This drone is suitable for experienced RC drone users aged 14 years or above. This product contains small parts, please keep them out of reach of children.
Please pay special attention to the following safety procedures:

  1. Keep away from the humid environment.
    The drone is made of precise electronic components. Humidity or water vapor may damage electronic components causing accidents.

  2. Keep away from rotating parts.
    Rotating parts can cause serious injury and damage. Keep face and body away from rotating motors.

  3. Keep away from heat.
    The RC drone is made of metal, fiber, plastic, electronic components, etc. Keep away from heat and direct sunshine to avoid distortion and damage.

  4. Stay aware while operating this drone.
    Avoid areas with sudden changes in elevation, uneven ground, or dangerous obstacles.

IMPORTANT SAFETY NOTICE FOR DRONE CARE

  • Store the drone in a cool, dry place at a temperature between 5°C/40°F and 27°C/80°F
  • Store upright and do not rest objects against the drone
  • Inspect the drone for damage after each flight
  • Do not use it if the drone is punctured or damaged
  • Do not expose the drone to water
  • Do not leave the drone in direct sunlight
  • Do not open the battery casing to switch out the battery
  • Please use caution when in the presence of children or animals This drone contains two rechargeable internal lithium-polymer (Li-Po) batteries. Please do not attempt to disassemble or repair the battery after it no longer holds a charge.
    Email us at [email protected] for questions, comments, or to request spare parts.

GUIDELINES FOR LI-PO BATTERY-POWERED DEVICES

  • Never overcharge a Li-Po battery
  • Do not charge Li-Po batteries near flammable materials or liquids
  • Keep Li-Po batteries away from children and animals
  • Never use or charge a Li-Po battery that has ballooned or swelled
  • Never use or charge a Li-Po battery that has been punctured or damaged
  • Heat is a known factor in battery fires; if a battery is pushed beyond 60°C/140°F during discharging or charging, problems could occur due to metallic lithium generation,  which damages the cell
  • If the Li-Po battery is pushed beyond its limits, the battery could get hot and performance will drop
  • Store Li-Po batteries at less than full charge if not in use for more than one week
  • If the Li-Po battery is removed from the drone, inspect the battery and battery connections; if you find damage to the battery, battery pins, or contacts, discontinue use and  visit force1rc.com to purchase replacement parts

WARNING: DO NOT LEAVE THE BATTERY CHARGING UNSUPERVISED

DRONE BATTERY CHARGING INSTRUCTIONS

  • Use included USB charger to charge the drone only when the drone is OFF
  • The USB charger light will turn red when charging
  • If the charging cord isn’t easily going in, DO NOT FORCE IT

FORCE1 F1 MONARC BLU Monarch Motion Drone - DRONE
BATTERY

LI-PO BATTERY DISPOSAL & RECYCLING

Lithium-Polymer batteries must not be placed with household trash.
Please contact the local environmental or waste agency or your nearest Li-Po battery recycling center.

BOX CONTENTS

FORCE1 F1 MONARC BLU Monarch Motion Drone - BOX
CONTENTS

DRONE OVERVIEW

FORCE1 F1 MONARC BLU Monarch Motion Drone - DRONE
OVERVIEW

PALM REMOTE OVERVIEW

FORCE1 F1 MONARC BLU Monarch Motion Drone - PALM
REMOTE

COMMAND JOYSTICK OVERVIEW

FORCE1 F1 MONARC BLU Monarch Motion Drone - COMMAND
JOYSTICK

1-KEY LIFT/LAND + AUTO HOVER – SEE PAGE 13
SPEED – SEE PAGE 16
360° FLIPS + BARREL ROLLS – SEE PAGE 16
ROTATION – SEE PAGE 17
ALTITUDE CONTROL – SEE PAGE 17

QUICK-START GUIDE

  1. Press the button on the tail to power on the drone; the wings and eyes will blink.
  2. Push the power button on the Palm Remote; the remote light will blink red.FORCE1 F1 MONARC BLU Monarch Motion Drone - Master Joystick
  3. Push the Palm Remote power button again quickly to pair with the drone; blinking red eyes will stay solid, indicating a successful pairing. FORCE1 F1 MONARC BLU Monarch Motion Drone - power button
  4. Press the Master Joystick in to activate the 1-Key Lift. The Monarch will fly up to 3 ft. and hover, ready for flight!FORCE1 F1 MONARC BLU Monarch Motion Drone - Palm Remote 1

NEED HELP?
WATCH OUR VIDEO TO LEARN MORE!

FORCE1 F1 MONARC BLU Monarch Motion Drone - qr codehttps://force1rc.com/pages/monarch-video

STARTING THE DRONE

1-KEY LIFT/LAND + AUTO HOVER
Press the Master Joystick IN and the drone will ascend.
The drone will also land by pressing and holding the Master Joystick IN.FORCE1 F1 MONARC BLU Monarch Motion Drone - Master
Joystick3

MIDAIR LAUNCH
Warning: Make sure the Palm Remote and drone are ON and paired (that the drone’s eyes are solid red) for this advanced maneuver.
Launch the drone midair by tossing it gently upward, immediately followed by pressing and holding the Master Joystick IN.FORCE1 F1 MONARC BLU Monarch
Motion Drone - MIDAIR LAUNCH

PALM DIRECTIONAL CONTROLS

The Monarch is a motion-controlled drone. This means the drone’s flight is controlled with your hand gestures! The Monarch will perform according to coordinated hand and palm remote movements. The diverse motion-control features are described in this section.

HOVER
The drone will auto hover when the hand is in a flat, neutral position.FORCE1 F1 MONARC BLU Monarch Motion Drone -
HOVER

FORWARD
Tilt the Palm Remote nose down to move the drone forward.

FORCE1 F1 MONARC BLU Monarch Motion Drone - FORWARD

REVERSE
Tilt the Palm Remote nose up to reverse the drone.

FORCE1 F1 MONARC BLU Monarch Motion Drone - REVERSE

LEFT
Tilt the Palm Remote to the left to track the drone left.

FORCE1 F1 MONARC BLU Monarch Motion Drone - LEFT

RIGHT
Tilt the Palm Remote to the right to track the drone right.

FORCE1 F1 MONARC BLU Monarch Motion Drone - RIGHT

COMMAND JOYSTICK

SPEED
Shift the Master Joystick forward and release to toggle through low, medium, and high speeds.  The drone starts at a low speed. Each forward joystick movement cycles through each speed.

FORCE1 F1 MONARC BLU Monarch Motion Drone - SPEED

360° FLIPS + BARREL ROLLS
Shift the Master Joystick up to make the drone perform a flip or roll. While shifting, tilt Palm Remote up or down for 360° flips; tilt left or right for barrel rolls.

FORCE1 F1 MONARC BLU Monarch Motion Drone - BARREL
ROLLS

ROTATION
Shift the Master Joystick backward and release it to rotate the drone in stages. Shift and hold the Master Joystick backward for continuous rotation until the joystick is released. FORCE1 F1 MONARC BLU Monarch Motion Drone -
BARREL ROLLS1

ALTITUDE CONTROL
The drone changes altitudes with coordinated palm and joystick movements. Hold the Master Joystick downward and tilt the Palm Remote nose up to raise the drone. Hold the  Master Joystick downward and tilt the Palm Remote nose down to lower the drone.FORCE1 F1 MONARC BLU Monarch Motion Drone - ALTITUDE
CONTROL

BATTERY REPLACEMENT

Firmly slide the battery backward on the drone until it clicks loose.

Align the new battery with the drone contact points and snap it in place.

FORCE1 WANTS TO KEEP IN TOUCH!
We’d like to share in the fun! Post your photos, videos, and messages on social media. Share your story with the hashtag:
#FLYMONARCH

FORCE1 F1 MONARC BLU Monarch Motion Drone

| FORCE1 F1 MONARC BLU Monarch Motion Drone - fig1
---|---
facebook.com/force1rc/| @force1rc

TROUBLESHOOTING GUIDE

PROBLEM SOLUTION
I can’t turn the drone on. Carefully review the preflight operation sequence.

When starting the palm remote,
be sure to hold the power button down longer to start the drone, with a quick push to pair with the drone. The red light eyes will glow solid red when the drone is paired with the palm remote.
The drone won’t charge.| Make sure the charging cable is connected to the USB port. There is a socket in the
battery. The USB plug should display a red light when charging and no light when
fully charged.
The drone keeps crashing.| Make sure you have plenty of flight space. The Monarch is easier to navigate with
fewer obstacles.
The drone LED lights flash, but they won’t fly.| Make sure the palm remote battery is working. Test the buttons on the remote and
the drone to ensure communication is established.
The drone propellers spin, but it won’t fly.| Inspect the propellers for damage and clear any debris if necessary. Try powering
down the drone and palm remote before starting again.
How tough is the Monarch?| The Monarch drone is quite durable. That said, take care to be gentle when handling
the drone. Assuming you are staying clear of any hazardous spaces, objects, or
liquids, the drone should be ready to relaunch again after a crash.

Email us at [email protected] for questions, comments, or to request spare parts.

WARRANTY

LIMITED 90-DAY WARRANTY AND FREE LIMITED REPLACEMENT PARTS FOR 90 DAYS
Force1rc.com warrants to the original buyer only that its products will be free from defects in material and workmanship for ninety (90) days from the date upon which the product is shipped, either directly from Force1rc.com or from an Authorized Reseller’s location, to the buyer.

The following conditions must be met to be eligible for warranty coverage:

  1. During the warranty, period product is used as intended by the manufacturer.
  2. The Product has not been disassembled or modified.
  3. The labels and serial numbers show no signs of tampering or altering.
  4. Buyer has a warranty code obtained by registering their product online prior to making a claim.

EXCEPTIONS: THE LIMITED WARRANTY SHALL NOT APPLY TO:

  • Damage caused by normal wear and tear
  • Accident, negligence, abuse, misuse, misapplication, or willful damage by buyer (or its agents), or acts of nature
  • Crash or burning caused by non-manufacturing factors
  • Damage caused by unauthorized modification or disassembly not authorized by the instruction manual
  • Damage caused by incorrect use or operation
  • Damage caused by a mismatch or misuse of battery or charger
  • Failure of the operator to follow the operating instruction or use outside the product’s operating parameters
  • Damage caused by operating the product in poor weather (i.e., strong wind, rain, low visibility, etc.)
  • Damage caused by operating the product in or around electromagnetic interference (i.e., radio transmitting tower, high-voltage wire, substation, etc.)
  • Damage caused by operating the product where there may be interference caused by other wireless devices
  • Operating the product with a load capacity in excess of the safe weight listed in the manual
  • Operating the product with aged, damaged, or unauthenticated third-party components
  • Operating the product with a defective battery

PROCEDURE: Any claims for breach of the foregoing limited warranty shall only be valid if the buyer makes such claim in writing within ninety (90) days of the date of shipment of the product to which the claim relates. To make a warranty claim, please email [email protected] with your full name, address, phone number, order number,  drone type, part type, purchase date, and product issue.

LIMITED REMEDY: Force1rc.com’s sole liability, and buyer’s sole remedy, for any breach of the foregoing warranty, shall be at Force1rc.com’s option, to (i) exchange the product with a new product or a refurbished product that is functionally equivalent to the original product, or (ii) issue a credit or refund for the purchase price of the product. Any replaced products shall be warranted as set forth herein, provided that the period within which the buyer may make further claims shall be limited to the remainder of the original period for the applicable product or 90 days, whichever is longer (although the warranty period shall be suspended during any period of replacement).

DISCLAIMER: THE WARRANTY AND REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, AND FORCE1RC.COM DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, AND ANY WARRANTIES ARISING OUT OF COURSE OF DEALING, COURSE OF PERFORMANCE AND TRADE USAGE. FORCE1RC.COM IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CONTRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS; LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO, COMPROMISE OR CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED WITH THE PRODUCT OR ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF INFORMATION STORED IN THE PRODUCT.                             Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. In addition, some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
FREE REPLACEMENT PARTS FOR 90 DAYS: Force1.com shall also make available any spare part needed for registered drones free of charge for 90 days from the date of purchase, with the exception of batteries, motors, circuit boards, cameras, and transmitters. Shipping charges may apply. Limit one part type request per registered drone (e.g.,  registrants are entitled to one extra set of propellers per registered drone). To request spare parts, please email [email protected] with your warranty code, drone name/model, current shipping address, purchase date, and part type.
GET YOUR WARRANTY CODE AT force1rc.com/pages/warranty- signup
HAVE YOUR ORDER NUMBER AND/OR DRONE UPC READY

To ensure that play is both safe and fun, please review these operating instructions:
Failure to follow all safety instructions may result in injury or property damage none of which Force will be held liable for as proper warnings are outlined in the manual.

  • Upon use of this product, the end-user assumes all responsibility and Force cannot be held liable for any personal injury and/or property damage.
  • This item contains fast-moving parts, motors, and/or other wiring. When using it, basic precautions should always be followed including but not limited to the following:
  • Keep your eye on the product at all times
  • Tie back hair or wear a hat to avoid entanglement or injury
  • Keep hands, hair, and loose clothing away from moving parts when the power switch is turned ON.
  • Please ensure the product is turned off when not in use.
    USA Toyz U818A HD+ RC Drone with Camera - warning

CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE SELLER WILL VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide residential protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. This can be determined by turning the equipment off and on, the user  is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on the circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced technician for help.

FCC WARNING
The equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void the user’s authority to operate this device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
    force1rc.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

FORCE1 User Manuals

Related Manuals