Aigostar 8433325207588 Outdoor Wall Lights User Manual
- June 14, 2024
- aigostar
Table of Contents
Aigostar 8433325207588 Outdoor Wall Lights
MODERN WALL LIGHT DIE-CASTING SERIES MANUAL
Thank you for buying the AIGOSTAR product. Please read this manual carefully before operating your product and retain it for future reference.
Product introduction
Wall light is a common decoration lighting of people’s life. Iron die-casting wall light, modern simple style, lines design, which are easily to match. Integrated with the modern building, creating a fashionable atmosphere during the daytime; at night, playing a role in decorating the wall, promoting exquisite and fashionable sense of the space. Widely application, suitable for installing on outdoor wall, gallery and other places, playing a good effect of decoration and lighting.
Product Features
- Simple design, fashion and beauty, promote the stylish of the wall.
- Adopt high applicability GU10 lamp holder, easy to assemble and disassemble, widely applied.
- IP65, waterproof and dust-proof, high safety performance.
- Whole die-casting iron housing, durable, long service life.
Parameter
Modern wall light die-casting series Single-head GU10 without light source/ Round (CS53R-1 )/Square (CS53S-1)
- Size: 12560105mm
- Material: Aluminum +Glass
- Waterproof grade: IP65
- Lampholder: GU10
- Input voltage: AC220-240V 50/60Hz
- Certification: UKCA
Modern wall light die-casting series Double-head GU10 without light source/ Round (CS53R-2)/Square (CS53S-2)
- Size: 16860105mm
- Material: Aluminum +Glass
- Waterproof grade : IP65
- Lampholder: GU10
- Input voltage: AC220-240V 50/60Hz
- Certification: UKCA
Installation
- Unscrew the mounting cover’s screws from the luminaire.(Pic1)
- Take down the lamp body’s front ring.(Pic2)
- install the lamp and the front ring.(Pic3)
- Drill appropriate size holes on the wall according to the mounting cover, install inflatable colloidal particles in the drilled holes and fix it with thread rolling tapping screws. (Pic4)
- Open the waterproof terminal block and connect the power cord.(PicS)
- Fix the lamp body to the mounting bracket, tighten the lamp base screws and switch on the power supply after checking.(Pic6)
CAUTIONS
- BEFORE INSTALLATION, YOU HAVE TO CHECK THE LAMP FIRST TO SEE IF BROKEN DURING THE TRANSIT. IF THE LAMP WAS DAMAGED, PLEASE DO NOT INSTALL IT AND CONTACT THE SUPPLIER TO REPLACE THE LUMINAIRE.
- BEFORE REPLACING OR CLEANING THE LAMP, MAKE SURE THE LAMP IS POWER OFF TO AVOID ELECTRIC SHOCK AND MAKE SURE THE LAMP IS COOLING TO AVOID SCALDING.
AIGOSTAR INTERNATIONAL LIMITED UNIT 4 TEES VALLEY COURT GLENARM ROAD WYNYARD TS22 SFE GB GB311003583 http://www.aigostar.com MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>