CREALITY CR-6 SE 3D Printer User Manual

3D Printer User Manual
CR-6 SE

Dear Consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our teams will always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer. For a better experience in using our product, you can also learn how to use the Printer in the following ways:
View the accompanying instructions and videos on the Storage card. Visit our official website www.creality.com to find relevant software/hardware information, contact details, and operation and maintenance instructions.

NOTES

1. Do not use the printer in any way other than described herein in order to avoid personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We suggest placing it in a well-ventilated, low-dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as ABS or PLA to calibrate and test the machine.
5. Do not use any other power cable except the one supplied. Always use a grounded three-prong power outlet.
6. Do not touch the nozzle or printing surface during operation as they may be hot. Keep hands away from machines while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the printer. Such clothes may become tangled in the printer’s moving parts leading to burns, possible bodily injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools. Do not touch the nozzle directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the printer without supervision.
11. This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety.
12. Users shall comply with related nation and region’s laws, regulations, and ethical codes where the equipment or produced prints by it is used, and users of our product shall not use aforesaid products to print any end-use products, objects, parts, or components or any other physical prints that violate the national or regional laws, regulations and ethical codes where herein referred product and produced prints by it is located.

Introduction

1. Filament Holder
2. LCD Screen
3. Extruder
4. Storage Card Slot
5. USB Port USB
6. X Limit Switch
7. Nozzle Kit
8. Printing Platform
9. Coupling| 10. Z-axis Motor（Z2）
11. Y Limit Switch
12. Y-axis Motor
13. Handle
14. Filament Detector
15. Extruder (E) Motor
16. X-axis Motor
17. Z-axis Motor（Z1）
18. Voltage Switching Switch| 19. Power Cable Connection
20. X-axis Belt Tension Adjustment Knob
21. Y-axis Belt Tension Adjustment Knob
22. Glass Pick And Place Handle Plate
23. Photoelectric Switch
24. Tool Box
25. SD Card Slot Sticker
---|---|---

Parameters

Install the Gantry Frame

Install the Display
Install the Rack

Install the Handle

Easier to replace the platform and adjust the belt

Cable Connection

1. Connect the 16pin port to the nozzle adapter board as shown in the figure
2. Connect the extruder adapter board with 14pin port as shown
3. Connect Z-axis motor cable
4. Connect the photoelectric switch wire
5. Connect the power cord

Level the Platform

1. Select “Level” to automatically level
2. After the leveling is completed, adjust the Z-axis compensation value according to the adhesion of the printing consumables and the glass

Preheating Method 1
Note: The UI information is only for reference, the actual UI may be different.

Preheating Method 2

Note: The print preheating standard is adjusted at the factory, PLA preheating standard: nozzle temperature 200 °, hot bed temperature 60 °, ABS preheating standard: nozzle temperature 240 °, hot bed temperature 70 °. If you need to adjust it due to printing materials or other reasons, you can adjust the parameters on the interface home page to control → the temperature → PLA / ABS preheat setting.

When you wait for the temperature to rise, hang the filament over the filament holder.

Load Filament

When the current temperature reaches the target temperature, the consumables pass the material breakage detection and are inserted into the small hole of the extruder until the position of nozzle. If the consumables flow out at the nozzle, it means that the consumables have been loaded.
Tips：
How to replace the filament?

1. Cutting filament near the Extruder and slowly feed new filament until they are fed into the new filament.
2. Withdrawing the filament quickly and feeding the new filament after the nozzle was preheated and filament pushed a little forward.

Start Printing

Start Printing
** File names must be Latin letters or numbers, not Chinese characters or other special symbols
Notes:** For details on the software instructions, please refer to the slicing software manual in the memory card!

Start Printing

Circuit Wiring

Trouble-Shooting

Due to the differences between different machine models, the physical objects and the final images can be differ. The final explanation rights shall be reserved by Shenzhen Creality 3D Technology Co., Ltd.

http://qr21.cn/DgbPVQ

SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.
11F & Room 1201,Block 3,JinChengYuan,Tongsheng Community,
Dalang, Longhua District, Shenzhen,China,518109
Official Website: www.creality.com
Tel: +86 755-8523 4565
E-mail: info@creality.com cs@creality.com

References

• Creality - Global Leader in Consumer-Level 3D Printer Ecosystems and Creator
• 创想三维(CREALITY) - 3D打印机,教育/工业3D打印机领导品牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>