AeroCool 4710562754001 Aero Bronze 750W Power Supply User Manual

AeroCool 4710562754001 Aero Bronze 750W Power Supply

Safety Reminders

Before installation :

• Make sure that the wattage and output of your PSU are enough to power your system’s requirements.
• Make sure that the power cord is disconnected and that the PSU switct, is turned off.
• This PSU was designed for NON-INDUSTRIAL desktop systems according to INTEL’s Desktop Platform Form Factors. Usage outside of these parameters, including cryptocurrency mining, might cause overheating, malfunction, or damage to your equipment and will void your warranty.
• DO NOT attempt to expand the connectors through adapters or other means.
• DO NOT operate in wet or damp conditions.
• Do NOT open the PSU casing, the unit operates with hazardous voltages, and there is no serviceable component inside.
• Do NOT remove the warranty stick.er. Damage or removal of the sticker will void your warranty.
• Please visit Aerocool official website www.aerocool.io for details on your PSU warranty policy.

How to Install / Connector Description

1. Before installing the PSU, unplug the AC power cord and make sure the 1/0 panel is off.
   
   I/O panel is off
   

2. Connect 2D+4-pin connector to the motherboard.
   [Note] The detachable 4-pin connector of the 20+4-pin is not suitable for ATX12V 4-pin connector. Incorrect connection may cause irreversible damage.
   **Motherboard 20+4PIN**
   
   

3. Connect ATX12V (CPU power) 4-pin or 8-pin (by 4+4-pin) to the motherboard.
   ATX12V 4/8-PIN (by 4+4-PIN)

4. Connect SATA connector to devices, i.e. HDD/SSD/ODD.
   
   

5. Connect Molex 4-pin connector to devices, i.e. HOO/ODD/case fan.
   
   

6. Connect PC le 6-pln or 8-pln (by 6+2-pln) Nvidia 12pln to graphics card.
   [Note] Do not connect the PC le 6+2-pin connector to the ATX12V 8-pin connector. Incorrect connection may cause irreversible damage.
   **PCIe 6/8-pin (by 6+2 PIN) Nvidia 12pin**
   
   

Cabins and connector

Product Image

Instructions for installation

1. Before installation, please make sure the power cable is unplugged from the power box, and the switch on the power box is set to off position.

2 Install the power supply inside body..|
Z. Connect the connector 20+4rіpto the motherboard.|
4. Connect  connector 12 B4pinor Вріп (for additional power) to the motherboard to power the processor.|
5. Plug in the PCIe 6 pin connector or 8 pin, Nvidia 12 pin to 11 discard.|
b. Connect connector 1.1 SATNPATA to peripherals in devices. such asdic, optical drive ,PC cooler, etc.|

Trouble shooting

If your system does not function. please go through the steps below:

1. Switch PSU main 1/0 to ” 0 “(Off) to reset power supply for at least’s minutes then follow through steps below.
2. Ensure the AC cord is properly plugged into the wall outlet and the PSU.
3. Ensure each DC connector is tightly connected with motherboard, graphics card and all peripherals.
4. Ensure all pins are correctly plugged into the corresponding connector, for example PC le 6+2pin is for graphics card, not CPU power socket.
5. Turn main 1/0 switch to the “I” (On) position.

AEROCOOL ADVANCED TECHNOLOGIES CORP.
ALL RIGHTS RESERVED.

Documents / Resources

| AeroCool 4710562754001 Aero Bronze 750W Power Supply [pdf] User Manual
4710562754001, Aero Bronze 750W Power Supply, 4710562754001 Aero Bronze 750W Power Supply
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>