MUL-T-LOCK 9338 Unistrike Locking Instruction Manual
- May 15, 2024
- MUL-T-LOCK
Table of Contents
9338 Unistrike Locking
UNISTRIKE LOCKING
Model 9338
COMPACT MORTISE MOUNTING – EASY SURFACE MOUNTING
THE UNISTRIKE 9338 SUPPLEMENTARY LOCKING
THE TECHNOLOGY
Compact locking with
low installation depth.
The innovative Unistrike 9338 locking is an
elegant, universal solution.
It is used in doors as an access control locking
system, as well as on hatches, cabinets or
lockers.
The application ranges from companies,
practices, law firm or hotel to hospital and
laboratories.
The compact solution combines an electric strike
of model series 138T ProFix® with a magnetic
bolt counterpart. Thanks to its low installation
depth, it is particularly suitable for modern,
narrow door designs.
Low installation depth and subsequent adjustment options.
The newly developed magnetic bolt counterpart is
significantly more compact than other solution on the
market. After installation, the bolt can be adjusted to
the door situation using the FaFix® adjustment options
on the electric strike and counterpart.
The bolt used is particularly quiet due to its good
sliding properties and does not require any lubrication.
As an integrated solution, Unistrike offers greater
tamper protection compared to conventional holding
magnets. And as a surface-mounted solution, it is ideal
for retrofitting.
Example of application areas:
- Doctor’s offices
- Law offices
- Washrooms
- Interlocking systems
- Laboratories
The 9338 locking offers many possibilities of activation:
THE INTEGRATED SOLUTION:
COMPLETE INTEGRATION – CONTINUOUS SURFACE
The concealed solution offers particularly high tamper protection.
Unistrike consumes much less energy compared to conventional magnets.
Unistrike is fully integrated into both the door leaf
and its frame. Unlike conventional counterparts,
the magnetic bolt no longer projects from the
door leaf; it is fully sunk into the leaf instead.
This insures completely fat surfaces with
no mechanical elements protruding. The
integrated design creates a clear-cut, highly
discreet visual effect on an architectural level.
The retractable bolt enables the use of ProFix®2
technology with special advantages for
the entire locking system: the ProFix® design
eliminates the latch run-in edge on the frame or
strike plate. A strike plate with lip is no longer
required. The electric strike is fully integrated
into the closed profile and the door seal surface
remains completely intact.
Among other things, this makes it easier to clean
the door element and thus also meets the increased
hygiene requirements that are necessary in the
medical sector.
The magnet bolt counterpart is integrated in the door leaf.
Overview of advantages
-
Security: high level of tamper protection due to completely integrated solution
-
Break-in resistance: 675lb.
-
Design: concealed installation, not visible when door is open
-
Very silent due to magnetic bolt activation at door closed position
-
Magnetic bolt does not cause any wear/abrasion on the door frame
-
User-friendly: low opening force and no closing force required
-
Easy cleaning of the door element: continuous surface
-
Easy installation:
– FaFix® adjustment possibility on electric strike and counterpart
– No large cut out in the frame
– No strike plate with lip required
– Simple wiring only in the door frame -
Fail locked or fail unlocked version available
-
Optional: Monitoring contact
THE SURFACE-MOUNTED SOLUTION:
QUICKLY INSTALLED ALTERNATIVE FOR SUITABLE RETROFITTING
The surface-mounted solution is easy to install and visually discreet.
Retrofitting is also child’s play with the right accessories.
THE SURFACE-MOUNTED SOLUTION:
QUICKLY INSTALLED ALTERNATIVE FOR RETROFITTING
The surface-mounted variant is the ideal
alternative to the holding magnet for
retrofitting. The compact design is visually
appealing and can be installed in a wide
variety of ways: mounted on hinge side or
non-hinge side, on wood, glass or metal.
Unistrike offers several advantages compared to conventional holding magnets:
Overview of advantages
-
Security: greater tamper protection as it is integrated into the casing
-
Break-in resistance: 675lb.
-
Very silent due to magnetic bolt activation at door closed position
-
Design: small and compact design
-
Versatile: different installation types possible
-
Sustainable: less power, weight and material consumption than traditional magnets
-
User-friendly: low opening force and no closing force required
-
Easy installation:
– Simple wiring only in the door frame
– FaFix® adjustment options on the electric strike and on the counterpart -
Can be used with fail-unlocked or fail-locked
-
Optional: Monitoring contact
The surface mounting of Unistrike is extremely easy and fast:
THE 9338 MODEL RANGE
ITEM AND ORDERING INFORMATION
Complete set with strike plate (160x24x3mm)
Electric strike with protection diode and
magnetic bolt counter part.
Set without strike plate
For flexible use with effeff brand Profix®2
strike plates or for mounting in the surface mounted casing.
Electric strike with protection diode and magnetic bolt counter part.
Surface-mounted casing 9338 for electric
strikes
Order the appropriate electric strike set
without strike plate for the surface-mounted
casing.
Spacer plates
Spacer plates for placing underneath, suitable
for both surface-mounted casings.
Adhesive set
Two-component adhesive, consisting of
adhesive and activator.
Complete set with strike plate
(160x24x3mm)
Electric strike with monitoring contact and
protection diode and magnetic bolt counter
part.
Set without strike plate
For flexible use with effeff brand Profix®2
strike plates or for mounting in the surface-
mounted casing.
Electric strike with monitoring contact and protection
diode and magnetic bolt counter part.
Surface-mounted casing 9338 for magnetic
bolt counterpart
The magnetic bolt counterpart can be easily
fastened in the surface-mounted casing.
Included in delivery: 1 x surface-mounted
casing with mounting bracket and mounting
screws for the magnetic bolt counterpart
Mounting bracket
L-shaped mounting bracket for mounting the
surface-mounted casing 9338—-1N-9100 on
the door frame.
Included in delivery: 1 x mounting bracket with
fixing material
Screening plate set
Self-adhesive screening to cover the
bonding surface when mounted on glass
surface. Consists of two screening films and
one cleaning cloth.
ABOUT MUL-T-LOCK®
For over five decades, Mul-T-Lock® has been a worldwide leader in developing,
manufacturing and marketing high-security access solutions for
institutional, commercial, industrial, and residential applications.
We provide a wide range of high-security and high-quality locking solutions.
The company holds dozens of international patents for our innovative
user-friendly products, which provide safety, security, and convenience to
millions of people across the world
Mul-T-Lock® is fully owned by the ASSA ABLOY Group, a global leader in access
solutions with a proven track record in helping billions of people
experience a more open world through innovations that enable safe, secure and
convenient access to physical, and digital places.
1-800-Mul-T-Lock
info@mul-t-lockusa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>