XINJI C1 Smart Watch User Manual
- June 5, 2024
- XINJI
Table of Contents
XINJI C1 Smart Watch
Packing list
Specifications
- Product model: C1
- Waterproof rating: 5ATM
- Sensor: 3-axis G-sensor
- Battery capacity: 260mAh
- Synchronization method: Bluetooth
- Resolution: 240×280
- Display screen: 169 inch TFT
- Working time: about 10-25 days
- Working temperature: -10°C-50c
- Compatible system: IOS 100 or above, Android 5.0 or above
Please read the instructions before use
- The waterproof rating of the watch is 5ATM. You can use it nomally in daily lfe situations such as washing your hands, raining, etc. Please do not put the watch in hot water, do not perform operations such as underwater pressing or deep diving. it is not recommended to wear it in the shower.
- The waterproof function is not permanently effective, and the protective performance may be reduced due to daily wear and tear.
- Do not disassemble the product or replace the battery without authorization. If the product fails, please contact the after-sale service department.
- Avoid touching the screen surtacewith sharp or sticky objects to avoid damage. Avoid dropping the product on the ground or being strongly impacted by other objects. Avoid exposing the watch to corrosive liquids to avoid damage to the watch.
- Charge the batteries for two hours before use. overcharging at 100% for an extended time. Place the magnetic charging cable on the back of your smart watch and the end of the
- Please avoid charging cable magnetically sticks to the back of your Watch and aligns it properly. Please use the input voltage: 5vhA or 5V/2A charger. with the original charging cable provided by the manufacturer
- The data of this product is for health management reference only, please do not use it as medical data If abnormal physical data is found, the hospitai’s inspection shall prevail.
- The company reserves the right to change or modify all the information in the document without notice Due to software upgrades. the functions may vary in specific software versions.
APP download & login
- Get the OnWear app in the App Store on your iPhone.
- Get the OnWear app in Google Play on your Android phone
- Scan the GR cOde in your watch to download OnWear app (compatible with IOS10.0 or above /Android5.0 or above); After installing the app. please register or log in with the interface prompts. Turn on your phone Bluetooth, and select the Bluetooth name “XINJI-CT for binding. Connect your smart watch with your phone in OnWear App. The watch can be used normally now
Method of operation
- From the watch face, swipe down from the top of the screen to enter the shortcut interface
- From the watch face, swipe up from the bottom of the screen to enter the information list interface.
- From the watch face, swipe right from the left of the screen to enterthe menu style interface.
- From the watch face. swipe left from the right of the screen to enter interfaces including step counting. heart rate, and sleep
Warranty card
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
HOW TO USE
Exercise data
Click the data icon to check the corresponding date for the day, including
steps, distance, and calories.
Message
After the watclh is connected to the mobile APP, the newly pop-up information
on the mobile phone will be pushed to the watch side synchronously. The watch
can store multiple pieces of Information.
Weather
After the watclh is connected to the mobile app, the weather will be
automatically synchronized to the watch.
Heart rate monhoring
The measurement starts after the green indicator light at the bottom is on,
and is completed afteer the vibration occurs in about 30-60s. The measurements
are based on PPG technology.
Blood axygen monitoring
The rneasurement starts after the red indicator light at the bottom is on, and
is competed after the vibration occurs in about 30–60s. The measurements are
based on PPG technology.
Sleep monitoring
It records and shows your sleep status that day. The data is updated every day
and synchronized to the APP in the same time.
Sport mode
Get active your way by choosing your favorite workout modes, including
hiking, running, climbing, cycling. basketball, yoga and elliptical machine.
Breath training
Select the carresponding time, and follow the prompts on the watch until it is
completed.
Menu style
Adjust the Menu style selection in the watch settings. The menu supports list
mode and smart mode
Women’s heath
Set your gender to female in the app and add inforrnation about the menstrual
period. You can set up a period reminder with Orwear App.
Stopwatch
Click the triangle icon to start and click again to pause (the left icon
means resetting).
Timer
Count down from a specified time with the timer, and it ends with the
vibration reminder.
Music
After connecting your smart watch with app, open music player to control the
playbackof the music.
Dial switch
Watch face can be switched by long pressing the dial. Multiple dials are built
in the watch. You can also download more Watch faces through our App.
Powes on/off
Long press button for 3s to power on. The watch will automatically power on
when it is charging. Click the “Off” icon to shutdown.
System Info
View the Bluetooth name, Mac address, firmware version number and other
information of the watch
Reset
All persona data will be removed if you confirm to restore factory settings.
This manual is for reference, the specific functions and interface may be different from the actual product. Please refer to the actual product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>