XINJI G2 PLUS Smart Watch User Manual

XINJI G2 PLUS Smart Watch

Packing list

Specifications

• Product model : G2 PLUS
• Waterproof rating: 1P68
• Sensor: 3-axis G-sensor
• Battery capacity: 210mAh
• Synchronization method: Bluetooth
• Resolution : 360×360
• Display: 1.3 inch AMOLED
• Battery life: about 3-5 days
• Working temperature: -10°C~50°C
• Compatible system: lOS 12.0 or above, Android 6.0 or above

before using read the instructions

Please before use read the instructions

• The watch has a water resistance rating of IP68. It can be used normally in daily life such as washing hands, rain, etc. Do not put the watch in hot water or in the shower, do not perform underwater pressing operations or deep diving, Waterproof effectiveness may reduce with daily wear.
• Charge the battery for two hours before use. Please avoid overcharging at 100% for an extended time. Please use the charger with an input voltage of 5V/1A or 5V/2A and XINJI’s original magnetic charging cable.
• Avoid touching the screen surface with sharp or sticky objects to avoid damage. Avoid dropping the product on the ground or being strongly impacted by other objects. Avoid exposing the watch to corrosive liquids to audit damano to tha watch.
• Avoid exposing the product to corrosive liquids or prolonged immersion in seawater or salty water, as it may cause corrosion and will not be covered under warranty. Product collisions, drops, or any visible signs of impact, including screen fractures, are not covered within the warranty scope. Do not disassemble the product or replace the battery without authorization.
• This product is not a medical device and cannot be used for medical purposes or as a basis for diagnosis of any medical condition. Detection results are provided for reference only. Please consult professional medical institutions if you feel unwell.
• If the product fails, please contact the after-sales service department. The company reserves the right to change or modify all the information in the document without notice. Due to software upgrades, the functions may vary in specific software versions.

APP download & log in

1. Get the GloryFit app in the App Store on your iPhone.
2. Get the GloryFit app in Google Play on your Android phone.
3. Or scan the QR code in the watch to download the APP (compatible: IOS12.0 or above / Android6.0 or above);

After installing the APP, please register and log in accor ding to the interface prompts, and turn on Bluetooth at the same time; In the Device interface of the GloryFit app, select the Bluetooth name: “XINJI-G2PLUS” for binding, and the watch can be used normally ly.

Method of operation

• From the home screen, Slide up from the watch face main page to check the messages.
• From the home screen, Slide down from the main page, go to the settings shortcut page.
• From the home screen, slide from right to left on the watch face main page, open the shortcut interface.
• From the home screen, Go to the menu: slide from left to right from the watch face main page to enter the menu list, double click the side button to change the menu style.

Rotate button function

It can be realized by rotating the button to slide up and down. to be able to switch different menu styles, and switch to different watch faces. when it is in cellular menu style, the rotate button can zoom in or zoom out the display area.

• Training
  100 sports modes are supported: outdoor running, cycling, badminton, table tennis, tennis, hiking. walking, basketball, soccer, baseball, volleyball, cricket, rugby, field hockey, dancing, etc.

• Sport status
  Record the number of steps, distance, and calories for the day. More detailed information analysis and data records can be viewed in the APP.

• Bluetooth Calling
  While the watch and your phone are connected via Bluetooth, you can make Bluetooth calls on the watch.

• Heart rate monitoring
  Measure the current heart rate value; the watch can record and display the heart rate value for 24 hours, and automatically monitor the heart rate every 10 minutes. More detailed analysis and data records can be viewed in the APP.

• Blood oxygen monitoring
  Test the current blood oxygen value; it monitors blood oxygen throughout the day, more detailed analysis and data records can be viewed in the APP.

• Sleep monitoring
  Record and display the total sleeping hours, deep sleep and light sleep of the previous night. More detailed analysis and data records can be viewed in the APP.

• Message
  Me message reminders, sync notifications from your phone, and save up to 8 latest messages.

• Weather
  Disp lay the current weather conditions and the weather for the next 3 days. The weather information will be displayed once connecting to the APP. If the watch is disconnected for a long time, the weather information will not be updated.

• Voice assistant
  Double-click the down button to enter the voice assistant, double double-click the voice assistant to wake up the phone function. (Note: The watch needs to be connected to the mobile phone via Bluetooth before it can be used.)

• Music Control
  After connecting to the mobile phone, you can click “play/pause/previous/next song” on the smart watch to control the music from mobile phone, and the volume can be adjusted.

• Alarm
  8 alarm reminders can be set, the watch will vibrate and the screen will be bright.

• Pressure
  Measure the current pressure, the watch can record and display the pressure value 24 hours a day. More detailed information analysis and data records can be viewed in the APP.

• Mood
  Test the current mood. More detailed information analysis and data records can be viewed in the APP.

• Respiratory rate
  Measure the current respiratory rate.

• Breathing training
  You can set the breathing rhythm and time, and follow the training prompts to complete the breathing training.

• Watch face
  Press and hold the watch face for 3 seconds to enter the selection interface. Slide left and right to switch the watch face, and set it.

• SOS
  You can add contacts in “SOS call” on the APP side.

• sos
  You can add contacts in “SOS call” on the APP side.

• System info
  View the Bluetooth name, Mac address, Firmware version number and other information of the watch.

• Power on/ off
  Long press the button for 3s to power on. The watch will automatically power on when it is charging. Choose ‘Power Off’ in the watch setting and click ‘,/’ icon to shut down.

• Reset
  All personal data will be removed if you confirm to restore factory settings.

Warranty car

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>