XINJI C2 v2 Smart Watch User Manual

June 9, 2024
XINJI

XINJI C2 v2 Smart Watch User Manual
XINJI C2 v2 Smart Watch

Packing List

  • Smart Watch x1
  • Charging cable x1
  • User Manual x1

Specifications

  • Product model: C2
  • Waterproof rating: 3ATM
  • Sensor: 3-axis G-sensor
  • Battery capacity: 240mAh
  • Synchronization method: Bluetooth
  • Resolution: 360×360
  • Display: 1.3 inch AMOLED
  • Battery life: about 9-25 days
  • Working temperature: -lOt-50°C
  • Compatible system: IOS 10.0 or above, Android 5.0 or above

Please read the instruction before use

  • The waterproof rating of the watch is 3ATM. You can use it normally in daily life situations such as washing your hands, raining, etc. Please do not put the watch in hot water, do not perform operations such as underwater pressing or deep diving. it is not recommended to wear it in the shower.
  • The waterproof function is not permanently effective, and the protective performance may be reduced due to daily wear and tear.
  • Do not disassemble the product or replace the battery without authorization. If the product fails, please contact the after-sales service department.
  • Avoid touching the screen surface with sharp or sticky objects to avoid damage. Avoid dropping the product on the ground or being strongly impacted by other objects. Avoid exposing the watch to corrosive liquids to avoid damage to the watch.
  • Charge the battery for two hours before use. Please avoid overcharging at 100% for an extended time. Place the magnetic charging cable on the back of your smart watch and the end of the charging cable magnetically sticks to the back of your Watch and aligns it properly.
  • Please use the charger with an input voltage of 5V/1A or 5V/2A and XINJI’s original charging cable.
  • This product is not a medical device and cannot be used for medical purposes or as basis for diagnosis of any medical condition. Detection results are provided for reference only. Please consult professional medical institutions if you feel unwell.
  • The company reserves the right to change or modify all the information in the document without notice. Due to software upgrades, the functions may vary in specific software versions. 03

App Download & Login

QR Code



On Wear App Download

  1. Get the OnWear app in the App Store on your iPhone.
  2. Get the OnWear app in Google Play on your Android phone.
  3. Scan the QR code in your watch to download OnWear app (compatible with 10S10.0 or above /Android5.0 or above);

Install the APP, please register and login according to the interface prompts, you need to turn on the Bluetooth;

In the device interface of the OnWear, select the Bluetooth name: “XINJI-C2” for binding, and the watch can be used normally.

Method Of Operation

From the home screen, swipe down from the top of the screen to enter the shortcut interface.

From the home screen, swipe up from the bottom of the screen to enter the information list interface.

From the home screen, swipe right from the left of the screen to enter the menu.

From the home screen, swipe left from the right of the screen to enter interfaces including step counting, heart rate, and sleep.

Exercise data
Check the corresponding date for the day, including steps, distance, and calories.

Message
After the smart watch is connected to the mobile APP, information received by the mobile phone will be pushed to the smart watch synchronously. The watch can store multiple pieces of information.

Weather
After the watch is connected to the mobile app, the weather will be automatically synchronized to the watch.

Heart rate monitoring
The measurement starts after the green indicator light at the bottom is on, and is completed after the vibration occurs in about 30-60s. The measurement is based on PPG technology.

Blood oxygen monitoring
The measurement starts after the red indicator light at the bottom is on, and is completed after the vibration occurs in about 30-60s. The measurement is based on PPG technology.

Sleep monitoring
It records and shows your sleep status that day. The data is updated every day and synchronized to the APP in the same time.

Sport mode
Get active your way by choosing your favorite workout modes, including hiking, running, climbing, cycling, basketball, yoga and elliptical.

Breath training
Select the corresponding time, and follow the prompts on the watch until it is completed.

Menu style
Select a menu style in watch settings. The menu supports list mode and smart mode.
Assembly Instruction

Always on display
Open the AOD clock in the watch settings and select digital clock or analog clock. The watch will continue to show the corresponding clock interface while it is asleep.
Assembly Instruction

Stopwatch
Click the triangle icon to start and click again to pause (the left icon means resetting).

Timer
Count down from a specified time with the timer, and it ends with the vibration reminder.

Music
After the smart watch is connected to the mobile APP, open music player to control the playback of the music.

Watch face
Long press to switch watch face. You can install hundreds of different watch faces on your watch from the mobile app or customize your favorite picture as a watch face.
Assembly Instruction
Power on/off
Long press button for 3s to power on. The watch will automatically power on when it is charging. Choose ‘Power Off’ in the watch setting and click ‘V’ icon to shutdown.

System info
View the Bluetooth name, Mac address, firmware version number and other information of the watch.

Reset
All personal data will be removed if you confirm to restore factory settings.

Warranty card

Customer information Seller information
Name Name
Add. Add.
E-mail Purchase Date
P.C. Product model
Tel: Invoice number:
Date Malfunction
--- ---

Xinji Logo

Documents / Resources

| XINJI C2 v2 Smart Watch [pdf] User Manual
C2 v2 Smart Watch, C2 v2, Smart Watch, Watch
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals