XINJI C1 Cobee Smart Watch Instructions
- June 12, 2024
- XINJI
Table of Contents
XINJI C1 Cobee Smart Watch
Packing List
-
Smart watch x1
-
Charging cable x1
-
Instructions x1
-
Screen Protector x1
Specifications
Product model: C1
Waterproof rating: 5ATM
Sensor· 3-axis G-sensor
Battery capacity 260mAh
Synchronization method: Bluetooth
Resolution· 240×280
Display screen: 1.69 inch TFT
Working time· about 10-25 days
Working temperature: -10°C-50°C
Compatible system· IOS 10.0 or above, Android 5.0 or above
Please Read The Instructions Before Use
- The waterproof rating of the watch is SATM. You can use it normally in daily life situations such as washing your hands, raining, etc. Please do not put the watch in hot water, do not perform operations such as underwater pressing or deep diving it is not recommended to wear it in the shower
- The waterproof function is not permanently effective, and the protective performance may be reduced due to daily wear and tear.
- Do not disassemble the product or replace the battery without authorization. If the product fails, please contact the after-sales service department
- Avoid touching the screen surface with sharp or sticky objects to avoid damage. Avoid dropping the product on the ground or being strongly impacted by other objects Avoid exposing the watch to corrosive liquids to avoid damage to the watch.
- Charge the batteries for two hours before use. Please avoid overcharging at 100% for an extended time. Place the magnetic charging cable on the back of your smart watch and the end of the charging cable magnetically sticks to the back of your Watch and aligns it properly
- Please use the input voltage: 5V/1A or 5V/2A charger, with the original charging cable provided by the manufacturer
- The data of this product is for health management reference only, please do not use it as medical data. If abnormal physical data is found, the hospital’s inspection shall prevail
- The company reserves the right to change or modify all the information in the document without notice. Due to software upgrades, the functions may vary in specific software versions.
APP Download & Login
OnWear App download
- Get the OnWear app in the App Store on your iPhone.
- Get the OnWear app in Google Play on your Android phone
- Scan the QR code in your watch to download OnWear app (compatible with IOS10.0 or above/ Android5.0 or above);
After installing the app, please register or log in with the interface prompts.
Turn on your phone Bluetooth, and select the Bluetooth name ‘XINJI-C1’ for binding. Connect your smart watch with your phone in OnWear App The watch can be used normally now
Method of Operation
From the watch face, swipe down from the top of the screen to enter the shortcut interface.
From the watch face, swipe up from the bottom of the screen to enter the information list interface.
From the watch face, swipe right from the left of the screen to enter the menu style interface.
From the watch face, swipe left from the right of the screen to enter interfaces including step counting, heart rate, and sleep .
Exercise data
Click the data icon to check the corresponding date for the day, including
steps, distance, and calories.
Message
After the watch is connected to the mobile APP, the newly pop-up information
on the mobile phone will be pushed to the watch side synchronously. The watch
can store multiple pieces of information.
Weather
After the watch is connected to the mobile app, the weather will be
automatically synchronized to the watch.
Heart rate monitoring
The measurement starts after the green indicator light at the bottom is on,
and is completed after the vibration occurs in about 30-60s. The measurements
are based on PPG technology.
Blood oxygen monitoring
The measurement starts after the red indicator light at the bottom is on, and
is completed after the vibration occurs in about 30-60s. The measurements are
based on PPG technology.
Sleep monitoring
It records and shows your sleep status that day The data is updated every day
and synchronized to the APP in the same time.
Sport mode
Get active your way by choosing your favorite workout modes, including hiking,
running, climbing, cycling, basketball, yoga and elliptical machine.
Breath training
Select the corresponding time, and follow the prompts on the watch until it is
completed.
Menu style
Adjust the Menu style selection in the watch settings. The menu supports list
mode and smart mode.
Women’s health
Set your gender to female in the app and add information about the menstrual
period. You can set up a period reminder with Onwear App.
Stopwatch
Click the triangle icon to start and click again to pause (the left icon means
resetting).
Timer
Count down from a specified time with the timer, and it ends with the
vibration reminder.
Music
After connecting your smart watch with app, open music player to control the
playback of the music.
Dial switch
Watch face can be switched by long pressing the dial. Multiple dials are built
in the watch. You can also download more Watch faces through our App.
Power on/off
Long press button for 3s to power on. The watch will automatically power on
when it is charging.
Click the “Off” icon to shutdown.
System info
View the Bluetooth name, Mac address, firmware version number and other
information of the watch.
Reset
All personal data will be removed if you confirm to restore factory settings.
This manual is for reference, the specific functions and interface may be different from the actual product Please refer to the actual product
