BRESSER 7000017 Climate Smile Weather Station Instruction Manual

: June 5, 2024
: BRESSER

7000017 Climate Smile Weather Station
Instruction Manual BRESSER 7000017 Climate Smile Weather
Station

Visit our website via the following QR Code or web link to find further information on this GB product or the available translations of these instructions.

BRESSER 7000017 Climate Smile Weather Station - qr www.bresser.de/P7000017

WARRANTY

www.bresser.de/warranty_terms

Imprint

Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de
For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We ask for your understanding that unsolicited returns cannot be processed.
Errors and technical changes excepted.
© 2022 Bresser GmbH
All rights reserved.
The reproduction of this documentation – even in extracts in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark, and/or patent law in Germany, the European Union, and/or other countries.

Validity note

This documentation is valid for the products with the following article numbers: 7000017
Manual version: 0422

Manual designation:
Manual_7000017_Climate-Smile_ende_BRESSER_v042022a
Always provide information when requesting service.

About this Instruction Manual

NOTICE
These operating instructions are to be considered a component of the device.
Read the safety instructions and the operating manual carefully before using this device.
Keep this instruction manual in a safe place for future reference. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/ user of the product.

General safety instructions

DANGER
The danger of suffocation!
Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
This product contains small parts that can be swallowed by children! Choking hazard!

DANGER
Risk of an electric shock!
This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.

Never leave children unattended when handling the device! Follow the instructions carefully and do not attempt to power this device with anything other than the power sources recommended in this instruction manual, otherwise, there is a danger of an electric shock!

DANGER
Explosion hazard!
Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.

Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion!

NOTICE
The danger of material damage!
Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
Do not immerse the unit in the water!
Do not expose the device to impacts, vibrations, dust, constant high temperatures, or excessive humidity. This can result in malfunctions, short-circuits, or damage to the batteries and components.
Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or types or with different capacities. Re-move batteries from the device if it is not to be used for a longer period of time!
Do not use rechargeable AA batteries, as these will not give out the correct voltage for use.

NOTICE
Risk of voltage damage!
The manufacturer is not liable for damage related to improperly installed batteries!

Parts overview and scope of

BRESSER 7000017 Climate Smile Weather Station - figure
1

Illustration 1: All parts of the Thermo-hygro sensor

1	Housing	2	Display
3	Air slits	4	SET button
5	[UP ] button	6	[DOWN] button
7	Battery compartment with cover	8	Stand, removable

Scope of delivery:
Thermo-hygro sensor (A), button cell type CR2032 (not shown)
Also required (not included in the scope of delivery): 1x battery type AAA/LR03

Screen displays

BRESSER 7000017 Climate Smile Weather Station - figure
2 Illustration 2: Display indications of the thermometer/hygrometer

Setting up power supply

Remove the battery compartment cover.
Insert the battery(ies) into the battery compartment. Ensure that the battery polarity (+/-) is correct.
Replace the battery compartment cover.

Automatic time setting

After the power is restored, the unit automatically searches for the radio signal. It takes approximately 3-8 minutes to complete this process.
If the radio signal is received correctly, the date and time are set automatically and the reception symbol is displayed.
If no radio signal is received, proceed as follows:

Press the DOWN button for approx. 2 seconds to initiate the reception of the radio signal again.
Press the DOWN button for approx. 2 seconds to initiate the reception of the radio signal again.
If still no radio signal is received, the time must be set manually.

Manual time setting

In normal display mode, press the SET button for about 3 seconds to enter the time settings mode.
The digits to be set are now flashing.
Press the UP or DOWN button to change the value.
Press the SET button to confirm and switch to the next setting.
Sequence of the settings: Time zone > Hours > Minutes > Year > Month > Day > Language
Finally, press the SET button to save the settings and exit settings mode.
NOTICE! For more information on the time display in 12- or 24-hour mode, see the chapter “Changing the display”.

Automatic measurement display

Once the power is established, the readings for the current environment are displayed on the unit.

Clima indication (indoor)

BRESSER 7000017 Climate Smile Weather Station - figure
3 1 too cold
2 comfortable
3 too warm

The climate indication is a pictorial indication based on indoor air temperature and humidity in an attempt to determine comfort level.
Note:
• Comfort indication can vary under the same temperature, depending on the humidity.
• There is no comfort indication when the temperature is below 0° C (32° F) or over 60° C (140° F)

Display change

In normal display mode, press the SET button to switch between time and date.
In normal display mode, press the UP button to alternate between °C and °F when displaying the temperature unit.
In the normal display mode, press the UP key to switch between the 12-hour and 24-hour time display.

Disposal

Dispose of the packaging materials properly, according to their types, such as paper or cardboard.
Contact your local waste disposal service or environmental authority for information on the proper disposal.

Do not dispose of electronic devices in the household garbage!
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.

Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return the batteries after use either in our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge.
Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

Warranty

The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.

EC declaration of conformity

A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EC declaration of conformity is available at the following Internet address: www.bresser.de/download/7000017/CE/7000017_CE.pdf

Technical data

Power supply: 1x AAA/LR03 battery
Temperature unit (°C or °F selectable)
Temperature display range: -9.9°C to +50°C
Humidity display range: rH 8 relative humidity 1% to 99%

Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de @BresserEurope