eSSL Tyre Killer Series User Manual
- June 4, 2024
- eSSL
Table of Contents
eSSL Tyre Killer Series
Technical Parameter
- System : 220V electric drive
- Passing pressure: Max 80T container truck
- Power supply: 220 ( Control voltage 24V)
- System dynamic power (w): 180W
- Rising time: :Sl-2S
- Lowering time: :Sl-2S
- Working Temperature: -35°C~ 75°C
- Storage Environment : -10°C~65°C
- Material: A3 steel, with anti-rust paint
- Color: Optional
- Weight: 0.3T/0.4T
- Casing Size
Surface /Flush mounted type
Lmm | W mm | Hmm | Rising height mm |
---|---|---|---|
3000 | 550/500 | 80/136 | 150 |
3500 | 550/500 | 80/136 | 150 |
4000 | 550/500 | 80/136 | 150 |
4500 | 550/500 | 80/136 | 150 |
5000 | 550/500 | 80/136 | 150 |
5500 | 550/500 | 80/136 | 150 |
6000 | 550/500 | 80/136 | 150 |
Components
- Tyre killer
- Controller
- Motor
- Remote controller
Construction installation and bill of materials
- Locating based on client request
- Find good levels on both sides±l0mm
- Prepared M 12 setscrews
- AC220V power supply (2*1.5-2.Smm)
- Open-Close signal cable (4*1mm) (4: I.COP)
Surface Mounted STK-201
Flush Mounted Tyre Killer FTK-202
Controller diagram
Link control connection
- The link control with parking system, access control system, license plate recognition system, etc. can be realized, by the relay signal
- Control with parking barrier
Item| Parking barrier| | Tyre killer
---|---|---|---
1| COM| to| ov
2| Open| to| Close(parking barrier open, tyre killer close ,vehicle access)
3| Close| to| Open (parking barrier close, tyre killer open, vehicle stop) - Connect with loop detector for automatic closing
Item | Loop detector | Tyre killer | |
---|---|---|---|
1 | 4 | to | ov |
2 | 3 | to | Close(loop detects the vehicle, the spike close |
Traffic Light Connection
- Please use DC 12V traffic light
- Wiring as below
Alarm Connection
- Please use AC220VAlarm
- Connect to motor and FEW or FEV
Manual operation
- Open the casing of the motor
- Rotate the motor steering by hand
- Forward-up, reverse-down
Notice
- Please lubricate the bearing each half year by lubricating oil
- If it is flush mounted tyre killer, water-drainage is needed when installing.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>